Search NASASearch

Engineering topics

Woiceshyn, P. M.

Publications and source records attributed to Woiceshyn, P. M..

At least 19 records

The necessity for a new parameterization of an empirical model for wind/ocean scatterometry

Difficulties related to the paucity of weather observation data regarding oceans were potentially alleviated for three summer months in 1978 when NASA's Seasat telemetered data from three wind-measuring instruments. The present study is concerned with one of these instruments, the Seasat A Scatterometer System (SASS). Attention is given to an internal consistency check of the SASS 1 model, comparisons of SASS 1 and other model-predicted winds with in situ winds, and a brief summary of the principal findings. It is found that a new wind retrieval system is required if SASS wind data are to be globally applicable and, at the same time, are to meet the required performance specifications. The sum-of-squares (SOS) technique for inverting SASS NRCS (normalized radar cross section) measurements results in the discarding of valuable data in low-speed areas and for higher incidence angles.

Woiceshyn, P. M.

Large-scale analysis and forecast experiments with wind data from the Seasat A scatterometer

A series of data assimilation experiments is performed to assess the impact of Seasat A satellite scatterometer (SASS) wind data on Goddard Laboratory for Atmospheric Sciences (GLAS) model forecasts. The SASS data are dealiased as part of an objective analysis system utilizing a three-pass procedure. The impact of the SASS data is evaluated with and without temperature soundings from the NOAA 4 Vertical Temperature Profile Radiometer (VTPR) instrument in order to study possible redundancy between surface wind data and upper air temperature data. In the northern hemisphere the SASS data are generally found to have a negligible effect on the forecasts. In the southern hemisphere the forecast impact from SASS data is somewhat larger and primarily beneficial in the absence of VTPR data. However, the inclusion of VTPR data effectively eliminates the positive impact over Australia and South America. This indicates that SASS data can be beneficial for numerical weather prediction in regions with large data gaps, but in the presence of satellite soundings the usefulness of SASS data is significantly reduced.

Baker, W. E.

A new parameterization of an empirical model for wind/ocean scatterometry

The power law form of the SEASAT A Scatterometer System (SASS) empirical backscatter-to-wind model function does not uniformly meet the instrument performance over the range 4 to 24 /ms. Analysis indicates that the horizontal polarization (H-Pol) and vertical polarization (V-Pol) components of the benchmark SASS1 model function yield self-consistent results only for a small mid-range of speeds at larger incidence angles, and for a somewhat larger range of speeds at smaller incidence angles. Comparison of SASS1 to in situ data over the Gulf of Alaska region further underscores the shortcomings of the power law form. Finally, a physically based empirical SASS model is proposed which corrects some of the deficiencies of power law models like SASS1. The new model allows the mutual determination of sea surface wind stress and wind speed in a consistent manner from SASS backscatter measurements.

Woiceshyn, P. M.

The impact of scatterometer wind data on global weather forecasting

The impact of SEASAT-A scatterometer (SASS) winds on coarse resolution atmospheric model forecasts was assessed. The scatterometer provides high resolution winds, but each wind can have up to four possible directions. One wind direction is correct; the remainder are ambiguous or "aliases'. In general, the effect of objectively dealiased-SASS data was found to be negligible in the Northern Hemisphere. In the Southern Hemisphere, the impact was larger and primarily beneficial when vertical temperature profile radiometer (VTPR) data was excluded. However, the inclusion of VTPR data eliminates the positive impact, indicating some redundancy between the two data sets.

Atlas, D.

First global analysis of SEASAT scatterometer winds and potential for meteorological research

The first global wind fields from SEASAT-A scatterometer (SASS) data were produced. Fifteen days of record are available on tape, with unique wind directions indicated for each observation. The methodology of the production of this data set is described, as well as the testing of its validity. A number of displays of the data, on large and small scales, analyzed and gridded, are provided.

Peteherych, S.

Surface wind analyses for Seasat

During the 99 days of Seasat operation, two large-scale experiments were conducted which established the satellite sensors' wind measuring capabilities: (1) the Gulf of Alaska Experiment (GOASEX), and (2) the Joint Air Sea Interaction Experiment (JASIN), which unlike GOASEX was independent of the Seasat program and undertook comprehensive air and sea investigations which furnished excellent comparison data for Seasat. Qualitative comparison windfields were also provided by several storms. The point measurements in GOASEX and JASIN were averaged in conjunction with Seasat scatterometer regions and, on the basis of comparisons between several anemometers on buoys and meteorological ships and the calculation of various averaging times, a 20-min average yields a scatterometer scale windfield accuracy of up to + or 1 m/sec and + or - 10 deg in well-behaved windfields.

Brown, R. A.

Wind direction alias removal studies of Seasat scatterometer-derived wind fields

Seasat SASS fields for the North Atlantic were employed to test if meteorological features were discernible within the Seasat-produced wind fields, and if the features aided in determining a unique wind vector solution. Two groups were formed to work in isolation from each other until a true wind vector field was obtained for each SASS observation. The SASS data covered 1500 km swaths, and the angle of the Seasat antennas relative to the earth was known. Visible and IR data, along with surface weather stations, ship and ship buoy data were also available to the interpreters. Two-vector solutions by the two teams showed almost perfect agreement, and the alias problem was noted to reduce to a selection of two vectors 180 deg apart. Comparisons with the surface measurements in regards to wind directions resulted in agreement to within a standard deviation of 20% for direction. The SASS data is concluded to be useful for producing streamlines, isotachs, and mesoscale as well as cyclone-scale features.

Wurtele, M. G.

Mapping Ocean Winds by Radar

Information about ocean weather is extracted from radar returns with aid of special algorithm. Algorithm determines wind-speeds and wind directions at ocean surface, and from this information can locate low- and high-pressure centers, convergence regions, and zones of strong winds and wind shear associated with ocean weather system fronts.

Overland, J. E.

Predicting and monitoring duststorms

Information on duststorms is processed by terminal receiving signals from two geosynchronous satellites. Data is correlated with that of other agencies to produce color maps depicting storm area. Series of maps reveals storm direction, warning regions up to 24 hours before they are struck.

Woiceshyn, P. M.

High resolution marine meteorological analysis utilizing Seasat data

Seasat scatterometer (SASS) wind data was combined with surface meteorological readings to generate maps of lows, highs, ridges, and fronts. The SASS microwave radar permits all-weather surface wind observations with a 50 km resolution to within 2 m/sec or 10%. The scan area comprised the northern Pacific off the west coast of North America and southward from Alaska. Emphasis was placed on surface pressure analyses alone and in combination with the SASS data. Standard modeling of the existing weather systems was found to be unaltered by addition of the SASS data, although improvements were evident in the accuracy of delineating significant meteorological features and quantifying pressure gradients. Scale eddies and circulations were defined and cols were identified (by low wind speeds).

Peteherych, S.

Climatological relationships of severe duststorms in the Great Plains to synoptic weather patterns: A potential for predictability

A data base provided by 35 severe duststorms that occurred between 1968 and 1977 in the central and southern Great Plains allowed construction of a classification scheme of meteorological causes of duststorms, and a telescopic forecast technique for medium range (6 to 48 hour) prediction of severe cyclogenic duststorms. In addition, areal coverage definitions for duststorms based on characteristics of the storms, and a hierarchy of weather causes of severe duststorms were developed. The man machine mix forecast correctly predicted six of seven duststorms observed during the 1976-77 winter, with one overforecast; the machine-only forecast correctly predicted four of the seven duststorms, with one overforecast. Both techniques had problems correctly predicting the duration of severe duststorms.

Woiceshyn, P. M.

Surface observations for the evaluation of geophysical measurements from Seasat

The surface observations used for direct comparison with Seasat-derived values at fixed locations and as input to analyzed fields of pressure, wind, air and sea temperatures, and surface dew point are discussed. These included measurements made by research vessels participating in the Gulf of Alaska Seasat Experiment (GOASEX) and NOAA research platforms in addition to aircraft observations and reports from the World Weather Watch. The application of these observations in describing the synoptic-scale winds over the ocean is discussed, and the sensitivity of the verification statistics to the type of data (observations from buoys, weather ships, and transient vessels with or without anemometers) is considered. Results of a preliminary comparison of wind fields derived from Seasat-A scatterometer observation with winds specified by several types of platforms are presented.

Wilkerson, J. C.

Pioneer 10 and 11 radio occultations by Jupiter

Results on the temperature structure of the Jovian atmosphere are reviewed which were obtained by applying an integral inversion technique combined with a model for the planet's shape based on gravity data to Pioneer 10 and 11 radio-occultation data. The technique applied to obtain temperature profiles from the Pioneer data consisted of defining a center of refraction based on a computation of the radius of curvature in the plane of refraction and the normal direction to the equipotential surface at the closest approach point of a ray. Observations performed during the Pioneer 10 entry and exit and the Pioneer 11 exit are analyzed, sources of uncertainty are identified, and representative pressure-temperature profiles are presented which clearly show a temperature inversion between 10 and 100 mb. Effects of zonal winds on the reliability of radio-occultation temperature profiles are briefly discussed.

Kliore, A. J.

Dust storms - Great Plains, Africa, and Mars

Dust storms in the Great Plains of North America and in the Sahara Desert are analyzed on the basis of imagery from the geostationary Synchronous Meteorological Satellite. The onset time, location and areal extent of the dust storms are studied. Over land surfaces, contrast enhancement techniques are needed to obtain an adequate picture of dust storm development. In addition, infrared imagery may provide a means of monitoring the strong horizontal temperature gradients characteristic of dust cloud boundaries. Analogies between terrestrial dust storms and the airborne rivers of dust created by major Martian dust storms are also drawn.

Woiceshyn, P. M.

Temperature of the atmosphere of Jupiter from Pioneer 10/11 radio occultations

Radio-occultation data from the Pioneer 10 and 11 flybys are analyzed using an integral inversion technique combined with a model for Jupiter's shape based on gravity data in order to account for the oblateness of the planet's atmosphere. The inversion technique defines the center of refraction in terms of the radius of curvature and the normal to the equipotential surface at the closest approach point of the ray. An Abelian inversion of the data obtained during the Pioneer 10 entry, the Pioneer 10 exit, and the Pioneer 11 exit is performed by fixing the center of refraction at some average value for each occultation event. The results for all three measurements are found to be consistent and to show a temperature inversion between the 10-mb and the 100-mb levels, with temperatures of 130 to 170 K at 10 mb and 80 to 100 K at 100 mb. Major sources of error are discussed, and it is concluded that the range of reasonable temperature uncertainties at these levels does not exceed 40 K. It is noted that the temperature inversion was also inferred from Pioneer 10 IR radiometric data.

Kliore, A. J.

Structure of the atmosphere of Jupiter from Pioneer 10 and 11 radio occultation measurements

A technique for incorporating effects of the oblateness of Jupiter's atmosphere into the data analysis procedure for radio-occultation measurements is described which makes use of a spherical harmonic representation of the gravity field to compute the shape of the planet. With this technique, the center of refraction is located by the radius of curvature and the normal direction at the closest approach point of the ray. The present technique, a subsequent approximation involving the use of a constant center of refraction, and the Abel integral transform inversion method for spherical planets are applied to Pioneer 10 and 11 data. All the intermediate results obtained show a temperature inversion between 10 and 100 mb, with temperatures from 130 to 170 K at 10 mb and from 80 to 120 K at 100 mb. Comparison of the radio-occultation profiles with radiative-convective equilibrium models and the temperature profile based on Pioneer 10 IR radiometer data indicates good agreement between the models and the occultation results.

Kliore, A. J.

Atmosphere of Jupiter from the Pioneer 11 S-band occultation experiment - Preliminary results

Two additional radio occultation measurements of the atmosphere of Jupiter were obtained with Pioneer 11. The entry measurement leads to a temperature profile that is substantially in agreement with those obtained with Pioneer 10, showing temperatures much higher than those derived from other observations. The exit measurement is not usable because of the discontinuous drift of the spacecraft auxiliary oscillator, presumably due to the trapped radiation belts of Jupiter. The combination of two Pioneer 10 measurements and one Pioneer 11 measurement yields an oblateness of 0.06496 at 1 millibar and 0.06547 at 160 millibars. Measurements in the Jovian ionosphere indicate a number of layers distributed over about 3000 kilometers, with a topside temperature of about 750 K.

Kliore, A.

The atmosphere of Io from Pioneer 10 radio occultation measurements

The occultation of the Pioneer 10 spacecraft by Io (JI) provided an opportunity to obtain two S-band radio occultation measurements of its atmosphere. The day-side entry measurements revealed an ionosphere having a peak density of about 60,000 el/cu cm at an altitude of about 100 km. The topside scale height indicates a plasma temperature of about 406 K if it is composed of Na(+) and 495 K if N2(+) is principal ion. A thinner and less dense ionosphere was observed on the exit (night side), having a peak density of 9,000 el/cu cm at an altitude of 50 km. The topside plasma temperature is 160 K for N2(-) and 131 K for Na(+). If the ionosphere is produced by photoionization in a manner analogous to the ionospheres of the terrestrial planets, the density of neutral particles at the surface of Io is less than 10 to 1 trillion per cu cm, corresponding to a surface pressure of less than 10 to 1 nanobars.

Kliore, A. J.