Noble-metal dark-edge fermiology: Centrifugal barriers, core-hole memory, and the Zeeman Auger effect
Explore the source record for details and available documents.
Engineering topics
Publications and source records attributed to Woicik, J.
Explore the source record for details and available documents.
Tin (Sn) nanoparticle electrodes have been prepared and battery cycling performance has been investigated with 1.2 M LiPF6 in ethylene carbonate (EC) / diethyl carbonate (DEC) electrolyte (1:1, w/w) with and without added vinylene carbonate (VC) or fluoroethylene carbonate (FEC). Incorporation of either VC or FEC improves the capacity retention of Sn nanoparticle electrodes although incorporation of VC also results in a significant increase in cell impedance. The best electrochemical performance was observed with electrolyte containing 10% of added FEC. In order to develop a better understanding of the role of the electrolyte in capacity retention and solid electrolyte interface (SEI) structure, ex-situ surface analysis has been performed on cycled electrodes with infrared (IR) spectroscopy, X-ray photoelectron spectroscopy (XPS), and Hard XPS (HAXPES). The ex-situ analysis reveals a correlation between electrochemical performance, electrolyte composition, and SEI structure.
Binder free (BF) graphite electrodes were utilized to investigate the effect of electrolyte additives fluoroethylene carbonate (FEC) and vinylene carbonate (VC) on the structure of the solid electrolyte interface (SEI). The structure of the SEI has been investigated via ex-situ surface analysis including X-ray Photoelectron spectroscopy (XPS), Hard XPS (HAXPES), Infrared spectroscopy (IR) and transmission electron microscopy (TEM). The components of the SEI have been further investigated via nuclear magnetic resonance (NMR) spectroscopy of D2O extractions. The SEI generated on the BF-graphite anode with a standard electrolyte (1.2 M LiPF6 in ethylene carbonate (EC) / ethyl methyl carbonate (EMC), 3/7 (v/v)) is composed primarily of lithium alkyl carbonates (LAC) and LiF. Incorporation of VC (3% wt) results in the generation of a thinner SEI composed of Li2CO3, poly(VC), LAC, and LiF. Incorporation of VC inhibits the generation of LAC and LiF. Incorporation of FEC (3% wt) also results in the generation of a thinner SEI composed of Li2CO3, poly(FEC), LAC, and LiF. The concentration of poly(FEC) is lower than the concentration of poly(VC) and the generation of LAC is inhibited in the presence of FEC. The SEI appears to be a homogeneous film for all electrolytes investigated.
Here, we find a 5 eV satellite in the Ti1s photoelectron spectrum of the transition-metal oxide SrTiO 3 . This satellite appears in addition to the well-studied 13 eV structure that is typically associated with the Ti2p core line. We give direct experimental evidence that the presence of two satellites is due to the crystal-field splitting of the metal 3d orbitals. They originate from ligand 2pt 2 g → metal3dt 2 g and ligand 2pe g → metal 3de g monopole charge-transfer excitations within the sudden approximation of quantum mechanics. This assignment is made by the energetics of the resonant and high-energy threshold behaviors of the TiK–L 2 L 3 Auger decay that follows Ti1s photoionization.
We have studied the electronic structure of C and N co-doped TiO{sub 2} using hard x-ray photoelectron spectroscopy and first-principles density functional theory calculations. Our results reveal overlap of the 2p states of O, N, and C in the system which shifts the valence band maximum towards the Fermi level. Combined with optical data we show that co-doping is an effective route for band gap reduction in TiO{sub 2}. Comparison of the measured valence band with theoretical photoemission density of states reveals the possibility of C on Ti and N on O site.
Not Available
Capacitance-Voltage (C-V) characterization and hard x-ray photoelectron spectroscopy (HAXPES) measurements have been used to study metal/Al{sub 2}O{sub 3}/In{sub 0.53}Ga{sub 0.47}As capacitor structures with high (Ni) and low (Al) work function metals. The HAXPES measurements observe a band bending occurring prior to metal deposition, which is attributed to a combination of fixed oxide charges and interface states of donor-type. Following metal deposition, the Fermi level positions at the Al{sub 2}O{sub 3}/In{sub 0.53}Ga{sub 0.47}As interface move towards the expected direction as observed from HAXPES measurements. The In{sub 0.53}Ga{sub 0.47}As surface Fermi level positions determined from both the C-V analysis at zero gate bias and HAXPES measurements are in reasonable agreement. The results are consistent with the presence of electrically active interface states at the Al{sub 2}O{sub 3}/In{sub 0.53}Ga{sub 0.47}As interface and suggest an interface state density increasing towards the In{sub 0.53}Ga{sub 0.47}As valence band edge.
The local symmetries around the Hf sites in thin films of Hf 1-x Zr x O 2 /Si(100) were probed using grazing incidence extended X-ray absorption fine-structure spectroscopy (EXAFS). The effects of the Zr incorporation on the local crystal symmetries were investigated using Hf L 3 EXAFS at the Beamline X23A2 of the Brookhaven National Laboratory. The Zr ratios in the various films were set to between 0.0 and 1.0. Significant changes in the local environment were observed for x = 0.25 or greater values. For x = 0.0, the film local structure around Hf sites remain in the equilibrium monoclinic phase as referenced from our previous studies on HfO 2 thin films on Si(100). When Zr is introduced, tetragonal symmetry around the Hf atom appears and becomes dominant at x = 0.63. Using the EXAFS theoretical simulations and non-linear least-square fit results, the fractions of the monoclinic versus tetragonal phases were identified in each film.
X-ray photoelectron spectroscopy is an established technique for quantitative chemical analysis requiring accurate peak intensity analysis. We present evidence of focus/alignment dependence of relative peak intensities for peaks over a broad kinetic energy range with a hemispherical electron analyzer operated in a position imaging mode. A decrease of over 50% in the Ag 2p{sub 3/2} to Ag 3d ratio is observed in a Ag specimen. No focus/alignment dependence is observed when using an angular imaging mode, necessitating the use of angular mode for quantitative chemical analysis.
Combined hard x-ray photoelectron spectroscopy (HAXPES) and electrical characterisation measurements on identical Si based metal-oxide-semiconductor structures have been performed. The results obtained indicate that surface potential changes at the Si/SiO{sub 2} interface due to the presence of a thin Al or Ni gate layer can be detected with HAXPES. Changes in the Si/SiO{sub 2} band bending at zero gate voltage and the flat band voltage for the case of Al and Ni gate layers derived from the silicon core levels shifts observed in the HAXPES spectra are in agreement with values derived from capacitance-voltage measurements.
Hard x-ray photoelectron spectroscopy (HAXPES) was performed on In{sub 0.53}Ga{sub 0.47}As/Al{sub 2}O{sub 3} gate stacks as deposited and annealed at 400 Degree-Sign C, 500 Degree-Sign C, and 700 Degree-Sign C to test for out-diffusion of substrate elements. Ga and As core-level intensities increase with increasing anneal temperature, while the In intensity decreases. HAXPES was performed at two different beam energies to vary the surface sensitivity; results demonstrate Ga and As out-diffuse into the Al{sub 2}O{sub 3} film. Analysis suggests the presence of an interlayer containing Ga and As oxides, which thickens with increasing anneal temperature. Further diffusion, especially of Ga, into the Al{sub 2}O{sub 3} film is also observed with increasing anneal temperature.