Engineering topics

Wolf, David

Publications and source records attributed to Wolf, David.

3 records

NASA NTRS2007

Lightweight, Flexible Solar Cells on Stainless Steel Foil and Polymer for Space and Stratospheric Applications

The availability of low-cost, lightweight and reliable photovoltaic (PV) modules is an important component in reducing the cost of satellites and spacecraft. In addition, future high-power spacecraft will require lightweight PV arrays with reduced stowage volume. In terms of the requirements for low mass, reduced stowage volume, and the harsh space environment, thin film amorphous silicon (a-Si) alloy cells have several advantages over other material technologies (1). The deposition process is relatively simple, inexpensive, and applicable to large area, lightweight, flexible substrates. The temperature coefficient has been found to be between -0.2 and -0.3 %/degC for high-efficiency triple-junction a-Si alloy cells, which is superior for high temperature operation compared to crystalline Si and triple-junction GaAs/InGaP/Ge devices at 0.53 %/degC and 0.45 %/degC, respectively (2). As a result, the reduction in efficiency at high temperature typical in space conditions is less for a-Si alloy cells than for their crystalline counterparts. Additionally, the a-Si alloy cells are relatively insensitive to electron and proton bombardment. We have shown that defects that are created by electrons with energies between 0.2 to 2 MeV with fluence up to 1x10(exp 15) e/sq cm and by protons with energy in the range 0.3 MeV to 5 MeV with fluence up to 1x10(exp 13) p/sq cm can be annealed out at 70 C in less than 50 hours (1). Further, modules incorporating United Solar s a-Si alloy cells have been tested on the MIR space station for 19 months with only minimal degradation (3). For stratospheric applications, such as the high altitude airship, the required PV arrays are typically of considerably higher power than current space arrays. Airships typically have a large area available for the PV, but weight is of critical importance. As a result, low cost and high specific power (W/kg) are key factors for airship PV arrays. Again, thin-film a-Si alloy solar cell technology is well suited to such applications.

Beernink, Kevin↗

NASA NTRS1998

On-board Science Understanding: NASA Ames' Efforts

In the near future NASA intends to explore various regions of our solar system using robotic devices such as rovers, spacecraft, airplanes, and/or balloons. Such platforms will likely carry imaging devices, and a variety of analytical instruments intended to evaluate the chemical and mineralogical nature of the environment(s) that they encounter. Historically, mission operations have involved: (1) return of scientific data from the craft; (2) evaluation of the data by space scientists; (3) recommendations of the scientists regarding future mission activity; (4) commands for achieving these activities being transmitted to the craft; and (5) the activity being undertaken. This cycle is then repeated for the duration of the mission with command opportunities once or perhaps twice per day. In a rapidly changing environment, such as might be encountered by a rover traversing hundreds of meters a day or a spacecraft encountering an asteroid, this historical cycle is not amenable to rapid long range traverses, discovery of novelty, or rapid response to any unexpected situations. In addition to real-time response issues, the nature of imaging and/or spectroscopic devices are such that tremendous data volumes can be acquired, for example during a traverse. However, such data volumes can rapidly exceed on-board memory capabilities prior to the ability to transmit it to Earth. Additionally, the necessary communication band-widths are restrictive enough so that only a small portion of these data can actually be returned to Earth. Such scenarios clearly require the enabling of some crucial decisions to be made on-board by these robotic explorers. These decisions transcend the electromechanical control, health, and navigation issues associated with robotic operations. Instead they focus upon a long term goal of automating scientific discovery based upon data returned by sensors of the robot craft. Such an approach would eventually enable it to understand what is interesting because the data deviates from expectations generated by current theories/models of planetary processes that could have resulted in the observed data. Such interesting data and/or conclusions can then be selectively transmitted to Earth thus reducing memory and communications demands.

Roush, Ted L.↗

NASA NTRS1994

Three-Dimensional Coculture Of Human Small-Intestine Cells

Complex three-dimensional masses of normal human epithelial and mesenchymal small-intestine cells cocultured in process involving specially designed bioreactors. Useful as tissued models for studies of growth, regulatory, and differentiation processes in normal intestinal tissues; diseases of small intestine; and interactions between cells of small intestine and viruses causing disease both in small intestine and elsewhere in body. Process used to produce other tissue models, leading to advances in understanding of growth and differentiation in developing organisms, of renewal of tissue, and of treatment of myriad of clinical conditions. Prior articles describing design and use of rotating-wall culture vessels include "Growing And Assembling Cells Into Tissues" (MSC-21559), "High-Aspect-Ratio Rotating Cell-Culture Vessel" (MSC-21662), and "In Vitro, Matrix-Free Formation Of Solid Tumor Spheroids" (MSC-21843).

Wolf, David↗