Search NASA⌕ Search

Engineering topics

Wong, P.

Publications and source records attributed to Wong, P..

Stability of Brillouin flow in the presence of slow-wave structure

Including a slow-wave structure (SWS) on the anode in the conventional, planar, and inverted magnetron, we systematically study the linear stability of Brillouin flow, which is the prevalent flow in crossed-field devices. The analytic treatment is fully relativistic and fully electromagnetic, and it incorporates the equilibrium density profile, flow profile, and electric field and magnetic field profiles in the linear stability analysis. Using parameters similar to the University of Michigan's recirculating planar magnetron, the numerical data show that the resonant interaction of the vacuum circuit mode and the corresponding smooth-bore diocotron-like mode is the dominant cause for instability. This resonant interaction is far more important than the intrinsic negative (positive) mass property of electrons in the inverted (conventional) magnetron geometry. It is absent in either the smooth-bore magnetron or under the electrostatic assumption, one or both of which was almost always adopted in prior analytical formulation. This resonant interaction severely restricts the wavenumber for instability to the narrow range in which the cold tube frequency of the SWS is within a few percent of the corresponding smooth bore diocotron-like mode in the Brillouin flow.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Stability of Brillouin flow in planar, conventional, and inverted magnetrons

The Brillouin flow is the prevalent flow in crossed-field devices. We systematically study its stability in the conventional, planar, and inverted magnetron geometry. To investigate the intrinsic negative mass effect in Brillouin flow, we consider electrostatic modes in a nonrelativistic, smooth bore magnetron. We found that the Brillouin flow in the inverted magnetron is more unstable than that in a planar magnetron, which in turn is more unstable than that in the conventional magnetron. Thus, oscillations in the inverted magnetron may startup faster than the conventional magnetron. This result is consistent with simulations, and with the negative mass property in the inverted magnetron configuration. Inclusion of relativistic effects and electromagnetic effects does not qualitatively change these conclusions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Direct Imaging Discovery of A Super-Jupiter Around the Late B-Type Star K And*

We present the direct imaging discovery of an extrasolar planet, or possible low-mass brown dwarf, at a projected separation of 55 plus or minus 2 AU (1."058 plus or minus 0."007) from the B9-type star K And. The planet was detected with Subaru/HiCIAO (Subaru/High Contrast Instrument for the Subaru Next Generation Adaptive Optics) during the SEEDS (Strategic Exploration of Exoplanets and Disks with Subaru Telescope/HiCIAO) survey and confirmed as a bound companion via common proper motion measurements. Observed near-infrared magnitudes of J equals 16.3 plus or minus 0.3, H equals 15.2 plus or minus 0.2, K (sub s) = 14.6 plus or minus 0.4, and L prime equals 13.12 plus or minus 0.09 indicate a temperature of approximately 1700 degrees Kelvin. The galactic kinematics of the host star are consistent with membership in the Columba Association, implying a corresponding age of 30 (exp from plus 20 to minus10) Myr. The systems age, combined with the companion photometry, points to a model-dependent companion mass approximately 12.8 times the mass of Jupiter. The host stars estimated mass of 2.4 to 2.5 times the mass of the sun places it among the most massive stars ever known to harbor an extrasolar planet or low-mass brown dwarf. While the mass of the companion is close to the deuterium burning limit, its mass ratio, orbital separation, and likely planet-like formation scenario imply that it may be best defined as a super-Jupiter with properties similar to other recently discovered companions to massive stars.

HiCIAO↗

Tools and Techniques for Measuring and Improving Grid Performance

This viewgraph presentation provides information on NASA's geographically dispersed computing resources, and the various methods by which the disparate technologies are integrated within a nationwide computational grid. Many large-scale science and engineering projects are accomplished through the interaction of people, heterogeneous computing resources, information systems and instruments at different locations. The overall goal is to facilitate the routine interactions of these resources to reduce the time spent in design cycles, particularly for NASA's mission critical projects. The IPG (Information Power Grid) seeks to implement NASA's diverse computing resources in a fashion similar to the way in which electric power is made available.

Biswas, Rupak↗

JPL Energy Consumption Program (ECP) documentation: A computer model simulating heating, cooling and energy loads in buildings

The engineering manual provides a complete companion documentation about the structure of the main program and subroutines, the preparation of input data, the interpretation of output results, access and use of the program, and the detailed description of all the analytic, logical expressions and flow charts used in computations and program structure. A numerical example is provided and solved completely to show the sequence of computations followed. The program is carefully structured to reduce both user's time and costs without sacrificing accuracy. The user would expect a cost of CPU time of approximately $5.00 per building zone excluding printing costs. The accuracy, on the other hand, measured by deviation of simulated consumption from watt-hour meter readings, was found by many simulation tests not to exceed + or - 10 percent margin.

Lansing, F. L.↗

Oral annunciator with programmable vocabulary

Voice (analog) signal is converted to its digital equivalent and stored in solid state memory. Upon command, memory becomes part of annunciator system which includes other digital logic, digital-to-analog converter, and audio amplifier.

Paslay, D.↗