Comparison of measured and simulated radiotracer transport through complex terrain
Explore the source record for details and available documents.
Engineering topics
Publications and source records attributed to Wood, Lynn.
Explore the source record for details and available documents.
This report documents the results and findings of a one-year scoping study investigating multichannel readout application specific integrated circuits (ASICs) for interfacing to, and processing data from, silicon photomultiplier (SiPM) arrays. We document ASIC desired and required specifications for four applications supporting national security mission areas: neutron radiography, associated particle imaging, and two versions of kinematic neutron imaging cameras. While each application has a few unique requirements that stress capability, there is generally good agreement among most. Two recently developed ASIC devices were evaluated in a system-like configuration by interfacing these to scintillator crystals exposed to gamma and neutron sources. The 64-channel ORNL device delivered functional capability while meeting most mission requirements for neutron radiography. The Nalu Scientific device, a 32-channel full waveform digitizer, did not demonstrate reliable neutron / gamma separation but it is unclear if this was an ASIC issue or problems with test setup or firmware. A literature survey of other commercial and academic ASICs was undertaken to with the conclusion that existing devices do not meet all requirements.
The Time-Of-Propagation detector is a Cherenkov particle identification detector based on quartz radiator bars for the Belle II experiment at the SuperKEKB ee collider. The purpose of the detector is to identify the type of charged hadrons produced in ee collisions, and requires a single photon timing resolution below 100 picoseconds. A novel front-end electronic system was designed, built, and integrated to acquire data from the 8192 microchannel plate photomultiplier tube channels in the detector. Waveform sampling of these analog signals is done by switched-capacitor array application-specific integrated circuits. The processes of triggering, digitization of windows of interest, readout, and data transfer to the Belle II data acquisition system are managed by Xilinx Zynq-7000 programmable system on a chip devices.
Large liquid argon (LAr) time projection chambers (TPCs) have been adopted for the Deep Underground Neutrino Experiment (DUNE) experiment's far detector, which will be composed of four 17-kton detectors situated 1.5 km underground at the Sanford Underground Research Facility. This represents a large increase in scale compared to existing experiments. Both single- and dual-phase technologies will be validated at CERN, in cryostats capable of accommodating full-size detector modules, and exposed to low-energy charged particle beams. This program, called ProtoDUNE, also allows for extensive tests of data acquisition strategies. The Front-End LInk eXchange (FELIX) readout system was initially developed within the ATLAS collaboration and is based on custom field-programmable gate array (FPGA)-based Peripheral Component Interconnect Express input/output cards, connected through point-to-point links to the detector front end and hosted in commodity servers. FELIX will be used in the single-phase ProtoDUNE setup to read the data coming from 2560 anode wires organized in a single anode plane assembly (APS) structure. With a continuous readout at a sampling rate of 2 MHz, the system must deal with an input rate of 96 Gb/s. An external trigger will preselect time windows of 5 ms with interesting activity expected inside the detector. Event building will occur for triggered events, at a target rate of 25 Hz; the readout system will form fragments from the data samples matching the time window, carry out lossless compression, and forward the data to event building nodes over 10-Gb/s Ethernet. This paper discusses the design and implementation of this readout system as well as the first operational experience.
To produce the best physics results, high energy physics experiments require access to calibration and other non-event data during event data processing. These conditions data are typically stored in databases that provide versioning functionality, allowing physicists to make improvements while simultaneously guaranteeing the reproducibility of their results. With the increased complexity of modern experiments, and the evolution of computing models that demand large scale access to conditions data, the solutions for managing this access have evolved over time. In this white paper we give an overview of the conditions data access problem, present convergence on a common solution and present some considerations for the future.
The Belle II experiment at KEK is preparing for taking first collision data in early 2018. For the success of the experiment it is essential to have information about varying conditions available to systems worldwide in a fast and efficient manner that is straightforward for both the user and maintainer. The Belle II Conditions Database was designed to make maintenance as easy as possible. To this end, a HTTP REST service was developed with industry-standard tools such as Swagger for the API interface development, Payara for the Java EE application server, and the Hazelcast in-memory data grid for support of scalable caching as well as transparent distribution of the service across multiple sites. On the client side, the online and offline software has to be able to obtain conditions data from the Belle II Conditions Database in a robust and reliable way under very different situations. As such the client side interface to the Belle II Conditions Database has been designed with a variety of access mechanisms which allow the software to be used with and without an internet connection. Different methods to access the payload information are implemented to allow for a high level of customization per site and to simplify testing of new payloads locally. Changes to the conditions data are usually handled transparently but users can actively check whether an object has changed or register callback functions to be called whenever a conditions data object is updated. In addition a command line user interface has been developed to simplify inspection and modification of the database contents.
Traditional verification of spent nuclear fuel (SNF) includes determination of initial enrichment, burnup and cool down time (IE, BU, CT). Along with neutron measurements, passive gamma assay provides important information for determining BU and CT. Other gamma-ray-based assay methods such as passive tomography and active delayed gamma offer the potential to measure the spatial distribution of fission products and the fissile isotopic concentration of the fuel, respectively. All fuel verification methods involving gamma-ray spectroscopy require that the spectrometers manage very high count rates while extracting the signatures of interest. PNNL has developed new digital filtering and analysis techniques to produce an ultra-high rate gamma-ray spectrometer from a standard coaxial high-purity germanium (HPGe) crystal. This 37% relative efficiency detector has been operated for SNF measurements at input count rates of 500-1300 kcps and throughput in excess of 150 kcps. Optimized filtering algorithms preserve the spectroscopic capability of the system even at these high rates. This paper will present the results of both passive and active SNF measurement performed with this system at PNNL. (authors)