Search NASA⌕ Search

Engineering topics

Woolstenhulme, N. E.

Publications and source records attributed to Woolstenhulme, N. E..

At least 19 records

ON-GOING STATUS OF KJRR FUEL (U-7MO) QUALIFICATION

In order to cope with global shortage of Mo-99 supplies and with growing demand of neutron transmutation doping, KJRR construction plan has been launched since April 2012 to provide self-sufficiency of domestic RI demand, and to extend Si doping capacity for power device market growth. Through comprehensive surveillance of the fuels in-reactor behavior, KAERI has selected the fuel meat of U-7%Mo dispersion in an aluminum matrix with 5wt%Si for the KJRR fuel. As part of the efforts for fuel licensing and qualification of the KJRR fuel, an LTA irradiation test at the ATR started from November 2015 was successfully completed by reaching at 219 EFPD in the end of February 2017. Together with the results of HAMP-1 already completed irradiation and PIE, the successful irradiation of the LTA also demonstrates the fuel integrity under more rigorous conditions than the KJRR operation conditions. This paper updates the current status of the KJRR U7Mo (8 g-U/cm3) LTA irradiation and PIE plan up to date as of February 2017.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Irradiation Tests Supporting LEU Conversion of Very High Power Research Reactors in the US

The US fuel development team is developing a high density uranium-molybdenum alloy monolithic fuel to enable conversion of five high-power research reactors. Previous irradiation tests have demonstrated promising behavior for this fuel design. A series of future irradiation tests will enable selection of final fuel fabrication process and provide data to qualify the fuel at moderately-high power conditions for use in three of these five reactors. The remaining two reactors, namely the Advanced Test Reactor and High Flux Isotope Reactor, require additional irradiation tests to develop and demonstrate the fuel’s performance with even higher power conditions, complex design features, and other unique conditions. This paper reviews the program’s current irradiation testing plans for these moderately-high irradiation conditions and presents conceptual testing strategies to illustrate how subsequent irradiation tests will build upon this initial data package to enable conversion of these two very-high power research reactors.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Capabilities Development for Transient Testing of Advanced Nuclear Fuels at TREAT

The TREAT facility is a unique capability at the Idaho National Laboratory currently being prepared for resumption of nuclear transient testing. Accordingly, designs for several transient irradiation tests are being pursued to enable development of advanced nuclear fuels and materials. In addition to the reactor itself, the foundation for TREAT’s capabilities also include a suite of irradiation vehicles and supporting infrastructure to provide the desired specimen boundary conditions while supporting a variety of instrumentation needs. The challenge of creating these vehicles, especially since many of the modern data needs were not historically addressed in TREAT experiment vehicles, has necessitated a sizeable engineering effort. This effort is currently underway and maturing rapidly. This paper summarizes the status, future plans, and rationale for TREAT experiment vehicle capabilities. Much of the current progress is focused around understanding and demonstrating the behavior of fuel design with enhanced accident tolerance in water-cooled reactors. Additionally, several related efforts are underway to facilitate transient testing in liquid sodium, inert gas, and steam environments. This paper discusses why such a variety of capabilities are needed, outlines plans to accomplish them, and describes the relationship between transient data needs and the irradiation hardware that will support the gathering of this information.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Capabilities development for transient testing of advanced nuclear fuels at TREAT

The TREAT facility is a unique capability at the Idaho National Laboratory currently being prepared for resumption of nuclear transient testing. TREAT is an air-cooled reactor where the driver core is made up of urania dispersed in graphite blocks and encapsulated in zirconium alloy cans. In addition to the reactor itself, the foundation for TREAT's capabilities will also include a suite of irradiation vehicles and supporting infrastructure to provide the desired specimen boundary conditions while supporting a variety of instrumentation needs. Although TREAT historically supported all kinds of nuclear fuels, including LWR's, SFR's, space nuclear propulsion, research reactor plate-type fuels, and even fuels for use in the driver core of other transient test reactors, the majority of TREAT's more-recent experiment programs revolved around SFR's and sodium-environment test capsules and loops. MK-series loop experiment-specific test trains could be outfitted with a variety of instruments to monitor test and specimen conditions while the fast neutron hodoscope collected information about fuel movement before, during, and after transient excursions. The SERTTA (Static Environment Rodlet Transient Test Apparatuses) devices will be general purpose vehicles capable of providing inert gas, water (up to PWR conditions), steam, or perhaps even molten sodium environments within vessel-like capsules. The Multi-SERTTA vehicle design is particularly novel as it makes use of the full active core length in TREAT to test four small rodlets (∼12 cm length), each within its own hermetic boundary, it will be capable of housing pre-irradiated fuel specimens. Additional modules and adaptations of Multi-SERTTA will enable rapid loop pressure blowdown to simulate LOCA conditions. The Super-SERTTA, akin to the Multi-SERTTA will offer more possibilities for simulating transient phenomena.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

BISON modeling of reactivity-initiated accident experiments in a static environment

In conjunction with the restart of the TREAT reactor and the design of test vehicles, modeling and simulation efforts are being used to model the response of Accident Tolerant Fuel (ATF) concepts under reactivity-initiated accident (RIA) conditions. The purpose of this work is to model a baseline case of a 10 cm long UO{sub 2}- Zircaloy fuel rodlet in the Multi-SERTTA capsule in PWR conditions, using BISON and RELAP5 over a range of energy depositions and with varying reactor power pulse widths. The results provide an initial best estimate of fuel performance modeling during a RIA event in TREAT with a focus on the effect of varying the pulse width and energy deposition on both thermal and mechanical parameters that are important for predicting failure of the fuel rodlet. The combined BISON/RELAP5 model captures coupled thermal and mechanical effects on the fuel-to-cladding gap conductance, cladding-to-coolant heat transfer coefficient and water temperature and pressure that would not be capable in each code individually. These combined effects allow for a more accurate modeling of the thermal and mechanical response in the fuel rodlet and thermal-hydraulics of the test vehicle. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

TREAT neutronics analysis and design support, Part II: Multi-SERTTA-CAL

Experiment vehicle design is necessary in preparation for Transient Reactor Test (TREAT) facility restart and the resumption of transient testing to support Accident Tolerant Fuel (ATF) characterization and other future fuels testing requirements. Currently the most mature vehicle design is the Multi-SERTTA (Static Environments Rodlet Transient Test Apparatuses), which can accommodate up to four concurrent rodlet-sized specimens under separate environmental conditions. Robust test vehicle design requires neutronics analyses to support design development, optimization of the power coupling factor (PCF) to efficiently maximize energy generation in the test fuel rodlets, and experiment safety analyses. An integral aspect of prior TREAT transient testing was the incorporation of calibration experiments to experimentally evaluate and validate test conditions in preparation of the actual fuel testing. The calibration experiment package established the test parameter conditions to support fine-tuning of the computational models to deliver the required energy deposition to the fuel samples. The calibration vehicle was designed to be as near neutronically equivalent to the experiment vehicle as possible to minimize errors between the calibration and final tests. The Multi-SERTTA-CAL vehicle was designed to serve as the calibration vehicle supporting Multi-SERTTA experimentation. Models of the Multi-SERTTA-CAL vehicle containing typical PWR-fuel rodlets were prepared and neutronics calculations were performed using MCNP6.1 with ENDF/B-VII.1 nuclear data libraries; these results were then compared against those performed for Multi-SERTTA to determine the similarity and possible design modification necessary prior to construction of these experiment vehicles. The estimated reactivity insertion worth into the TREAT core is very similar between the two vehicle designs, with the primary physical difference being a hollow Inconel tube running down the length of the calibration vehicle. Calculations of PCF indicate that on average there is a reduction of approximately 6 % for PWR fuel rodlets irradiated under both wet and dry conditions. Changes to the primary or secondary vessel structure in the calibration vehicle can be performed to offset this discrepancy and maintain neutronic equivalency. Current possible modifications to the calibration vehicle include reduction of the primary vessel wall thickness, swapping Zircaloy-4 for stainless steel 316 in the secondary containment, or slight modification to the temperature and pressure of the water environment within the primary vessel. Removal of some of the instrumentation within the calibration vehicle can also serve to slightly increase the PCF. Future efforts include further modification and optimization of the Multi-SERTTA and Multi-SERTTA-CAL designs in preparation of actual TREAT transient testing. Experimental results from both test vehicles will be compared against calculational results and methods to provide validation and support additional neutronics analyses. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

TREAT neutronics analysis of water-loop concept accommodating LWR 9-rod bundle

The Transient Reactor Test (TREAT) facility that was commissioned in 1959 and that was put in stand-by in 1994, is now facing an upgrade to provide irradiation services to a variety of experimental programs. The neutronic studies presented in this paper show that the TREAT facility is capable of performing transient tests on fresh 9-rod PWR bundles in a water loop design constructed from Inconel piping using only fuel assemblies from the original core. High burnup rods in the same proposed design configuration approach, but do not meet, energy deposition targets for narrow-pulse reactivity insertion accident testing. The option to use a Zircaloy-based water loop was evaluated and found to increase the power coupling factor (PCF) adequately, but several engineering considerations show that the Inconel loop should be considered the baseline design option until detailed design work is performed. TREAT's capabilities for steam-based LOCA testing were also evaluated and found to allow for higher specimen energy deposition than RIA tests primarily because the reactor can release more energy over longer shaped transients. The same test configurations were evaluated in the presence of a partial TREAT-upgrade (TU) core with the notable observation that TU elements can enable high burnup rods to achieve RIA energy targets with the Inconel water loop. Further observations show that the partial TU core can help recover excess reactivity as needed and flatten pin-to-pin power profiles for more prototypic test conditions. These studies demonstrate that a simple U/C atom ratio gradient implementation results in more energy deposition into the test specimen and works to flatten the rod-to-rod power profile. It is expected that the actual, specially designed TREAT upgrade core will be much more effective than this study of a modified version demonstrates and deserves a comprehensive investigation to identify true capability. Overall, the complex interplay between fuel, geometry, neutron absorbers, and moderators emphasize that the facility's capabilities are flexible and further enabled by the ability to use TU elements.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Thermal-hydraulic performance of the TREAT Multi-SERTTA for reactivity initiated accident experiments

Experimental testing in the Multi-Static Environment Rodlet Transient Test Apparatus (SERTTA) will lead the rebirth of transient fuel testing in the United States as part of the Accident Tolerant Fuels (ATF) program. The Multi-SERTTA is comprised of 4 isolated pressurized environments capable of a wide variety of working fluids and thermal conditions. Ultimately, the TREAT reactor as well as the Multi-SERTTA test vehicle serve the purpose of providing desired thermal-hydraulic boundary conditions to the test specimen. The initial ATF testing in TREAT will focus on reactivity insertion accident (RIA) events using both gas and water environments including typical PWR operating pressures and temperatures. The heat transfer conditions during the high energy power pulses of RIA events remains a subject of large uncertainty and great importance for fuel performance predictions. To support transient experiments, the Multi-SERTTA vehicle has been modeled using RELAP5 with a baseline test specimen composed of fresh UO{sub 2} fuel in zircaloy cladding. The results show that for energy depositions less than 1380 J/g-UO{sub 2}, the vessel environment remains sub-supercritical. Two extremes of gap conductance show significant effect on event timing and peak cladding temperature but little effect on end state conditions. Inclusion of oxidation has increasing impact for increasing energy depositions. The effect of oxidation is non-negligible for planned TREAT experiments in the range of explored energy depositions. Pulse width has little impact on thermal hydraulic conditions under the assumptions used in this analysis. The model used in this work has been coupled to the fuel performance code, BISON, to accomplish best estimate predictive capability for Multi-SERTTA experiments. The results show the great flexibility and capacity of the TREAT Multi-SERTTA test vehicle to provide testing under a wide range of prototypic thermal-hydraulic conditions as never done before.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

TREAT neutronics analysis and design support, Part I: Multi-SERTTA

Experiment vehicle design is necessary in preparation for Transient Reactor Test (TREAT) facility restart and the resumption of transient testing to support Accident Tolerant Fuel (ATF) characterization and other future fuels testing requirements. Currently the most mature vehicle design is the Multi-SERTTA (Static Environments Rodlet Transient Test Apparatuses), which can accommodate up to four concurrent rodlet-sized specimens under separate environmental conditions. Robust test vehicle design requires neutronics analyses to support design development, optimization of the power coupling factor (PCF) to efficiently maximize energy generation in the test fuel rodlets, and experiment safety analyses. Calculations were performed to support analysis of a near-final design of the Multi-SERTTA vehicle, the design process for future TREAT test vehicles, and establish analytical practices for upcoming transient test experiments. Models of the Multi-SERTTA vehicle containing typical PWR-fuel rodlets were prepared and neutronics calculations were performed using MCNP6.1 with ENDF/B-VII.1 nuclear data libraries. Calculation of the PCF for reference conditions of a PWR fuel rodlet in clean water at operational temperature and pressure provided results between 1.10 and 1.73 W/g-MW depending on the location of the four Multi-SERTTA units with the stack. Basic changes to the Multi-SERTTA secondary vessel containment and support have minimal impact on PCF; using materials with less neutron absorption can improve expected PCF values, especially in the primary containment. An optimized balance is needed between structural integrity, experiment safety, and energy deposition in the experiment. Type of medium and environmental conditions within the primary vessel surrounding the fuel rodlet can also have a significant impact on resultant PCF values. The estimated reactivity insertion worth into the TREAT core is impacted more by the primary and secondary Multi-SERTTA vehicle structure with the experiment content and contained environment having a near negligible impact on overall system reactivity. Additional calculations were performed to evaluate the peak-to-average assembly powers throughout the TREAT core, as well as the nuclear heat generation for the various structural components of the Multi-SERTTA assembly. Future efforts include the evaluation of flux collars to shape the PCF for individual Multi-SERTTA units during an experiment such as to achieve uniformity in test unit environmental conditions impacted by the non-uniform axial flux/power profile of TREAT. Upon resumption of transient testing, experimental results from both the Multi-SERTTA and Multi-SERTTA-CAL will be compared against calculational results and methods for further optimization and design strategies. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

VALIDATION OF A RELAP5 POINT KINETICS MODEL OF TREAT

Development of advanced nuclear fuels requires testing of fuel specimens under various power-cooling mismatch conditions. The Transient Reactor Test (TREAT) facility at the Idaho National Laboratory will be used to provide transient nuclear heating of fuel specimens. Experiments will be conducted to support assessment of accident tolerant fuel designs being proposed for light water reactor applications. The experiments to be conducted at TREAT will provide data for the assessment of advanced, multi-physics computer codes. However, before the experiments can be performed, calculations are required to demonstrate that they will meet program objectives and that they can be performed safely in TREAT in the event of an unplanned reactivity insertion accident that occurs during the experiment. The safety calculations for the first experiments need to be performed in the next year and therefore will be performed with an existing computer code, RELAP5-3D. A point kinetics model of TREAT was developed for RELAP5-3D. The purpose of the model is to calculate the reactor power during experiments and to support the accident analyses of those experiments. The RELAP5-3D model was validated using data from nine TREAT experiments conducted previously. The RELAP5-3D model generates results that are in reasonable agreement with measured values of maximum core power, energy deposition, and maximum fuel temperature for a wide range of reactivity insertions.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Design of Irradiation Tests for Monolithic Fuel Qualification

The US fuel development team is focused on developing and qualifying the uranium-molybdenum monolithic fuel. Several previous irradiations have demonstrated the favorable behavior of the monolithic fuel. The overall irradiation program strategy was recently revamped to provide an opportunity to test, examine, and select the most advantageous fabrication processes for producing monolithic fuel. Specimens fabricated by the selected processes are planned to be irradiated in a series of tests in order to populate the data set needed for fuel qualification through the Nuclear Regulatory Commission. This paper summarizes the overall irradiation testing plan with an emphasis on the rigorous approach to design, analysis, and requirements for qualification tests. The recently designed Full Size Plate 1 irradiation test is also summarized as an example of this strategic approach to qualifying monolithic fuel.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

KJRR-FAI Hydraulic Flow Testing Input Package

The INL, in cooperation with the KAERI via Cooperative Research And Development Agreement (CRADA), undertook an effort in the latter half of calendar year 2013 to produce a conceptual design for the KJRR-FAI campaign. The outcomes of this effort are documented in further detail elsewhere [5]. The KJRR-FAI was designed to be cooled by the ATR’s Primary Coolant System (PCS) with no provision for in-pile measurement or control of the hydraulic conditions in the irradiation assembly. The irradiation assembly was designed to achieve the target hydraulic conditions via engineered hydraulic losses in a throttling orifice at the outlet of the irradiation vehicle.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

KJRR-FAI Status Report of Conceptual Design Activities

The Korea Atomic Energy Research Institute has initiated the Ki-Jang Research Reactor (KJRR) project to construct a new dedicated radio-isotope production facility in the KiJang province of South Korea. The KJRR will employ a uranium-molybdenum dispersion plate-type fuel clad in aluminum. The KJRR fuel assembly design will undergo irradiation in the Advanced Test Reactor (ATR) as part of the regulatory qualification of the fuel. The Idaho National Laboratory performed a multi-disciplined conceptual design effort and found that one full-size KJRR fuel assembly can be irradiated in the ATR’s north east flux trap. The analyses accomplished during the conceptual design phase are sufficient to prove viability of the overall design and irradiation campaign. Requirements for fission power can be met. The desired burnup can be achieved well within 15% depending on reactor operating availability. Mechanical design and structural analysis show that structural integrity of the irradiation test is maintained. It is recommended that future detailed design efforts be based on the concept described in this report.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DDE-MURR Status Report of Conceptual Design Activities (Rev. 1)

The Design Demonstration Experiment for the University of Missouri Research Reactor (DDE-MURR) is intended to facilitate Low Enriched Uranium (LEU) conversion of the MURR by demonstrating the performance and fabrication of the LEU fuel element design through an irradiation test in a 200mm channel at the Belgium Reactor 2 (BR2). Revision 0 of this report was prepared at the end of government fiscal year 2012 when most of the resources for furthering DDE design work were expected to be postponed. Hence, the conceptual design efforts were summarized to provide the status of key objectives, notable results, and provisions for future design work. Revision 1 of this report was prepared at the end of fiscal year 2013 in order to include results from a neutronic study performed by BR2, to incorporate further details that had been achieved in the engineering sketches of the irradiation devices, and to provide an update of the DDE-MURR campaign in relation to program objectives and opportunities for its eventual irradiation. These updates were purposed to bring the DDE-MURR conceptual design to level of maturity similar to that of the other two DDE efforts (DDE-MITR and DDE-NBSR). This report demonstrates that the DDE-MURR design effort is well on the path to producing a suitable irradiation experiment, but also puts forth several recommendations in order to facilitate success of the irradiation campaign.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

RERTR-12 Insertion 2 Irradiation Summary Report

The Reduced Enrichment for Research and Test Reactor (RERTR) experiment RERTR-12 was designed to provide comprehensive information on the performance of uranium-molybdenum (U-Mo) based monolithic fuels for research reactor applications.1 RERTR-12 insertion 2 includes the capsules irradiated during the last three irradiation cycles. These capsules include Z, Y1, Y2 and Y3 type capsules. The following report summarizes the life of the RERTR-12 insertion 2 experiment through end of irradiation, including as-run neutronic analysis results, thermal analysis results and hydraulic testing results.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

RERTR-13 Irradiation Summary Report

The Reduced Enrichment for Research and Test Reactor (RERTR) experiment RERTR-13 was designed to assess performance of different types of neutron absorbers that can be potentially used as burnable poisons in the low enriched uranium-molybdenum based dispersion and monolithic fuels.1 The following report summarizes the life of the RERTR-13 experiment through end of irradiation, including as-run neutronic analysis results, thermal analysis results and hydraulic testing results.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

AFIP-7 Irradiation Summary Report

The A dvanced Test Reactor (ATR) F ull size plate I n center flux trap P osition (AFIP) experiment AFIP-7 was designed to evaluate the performance of monolithic uranium-molybdenum (U-Mo) fuels in geometries which are prototypic of US high power research reactor (HPRR) fuel plates. The following report summarizes the life of the AFIP-7 experiment through end of irradiation, including a brief description of the safety analysis, as-run neutronic analysis results, hydraulic testing results, and thermal analysis results.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

AFIP-6 Mark II Irradiation Summary Report

Due to the incompletion of the A dvanced Test Reactor (ATR) F ull size plate I n center flux trap P osition (AFIP) experiment AFIP-6, a second irradiation (named AFIP-6 Mark II) of identical plates was performed. AFIP-6 Mark II was designed to evaluate high-power large-scale performance of monolithic uranium-molybdenum (U-Mo) fuels. The following report summarizes the life of the AFIP-6 MKII experiment through end of irradiation, including a brief description of the safety analysis, as-run neutronic analysis results, hydraulic testing results, and thermal analysis results.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗