Engineering topics

Workman, Gary

Publications and source records attributed to Workman, Gary.

6 records

NASA NTRS2004

Effects of Gravity on ZBLAN Glass Crystallization

The effects of gravity on the crystallization of ZrF(4)-BaF(2)-LaF(3)-AIF(3)-NaF glasses have been studied using the NASA KC-135 and a sounding rocket. Fibers and cylinders of ZBLAN glass were heated to the crystallization temperature in unit and reduced gravity. When processed in unit gravity the glass crystallized, but when processed in reduced gravity, crystallization was suppressed. A possible explanation involving shear thinning is presented to explain these results.

Gravitation↗

NASA NTRS2002

Efficient Nondestructive Evaluation of Prototype Carbon Fiber Reinforced Structures

Thermography inspection is an optic based technology that can reduce the time and cost required to inspect propellant tanks or aero structures fabricated from composite materials. Usually areas identified as suspect in the thermography inspection are examined with ultrasonic methods to better define depth, orientation and the nature of the anomaly. This combination of nondestructive evaluation techniques results in a rapid and comprehensive inspection of composite structures. Examples of application of this inspection philosophy to prototype will be presented. Methods organizing the inspection and evaluating the results will be considered.

Russell, Samuel S.↗

NASA NTRS1999

The Effects of Gravity on ZBLAN Glass

Heavy metal fluoride glass fibers show promise in applications such as surgical lasers, spectroscopy and imaging fiber bundles. ZBLAN, which is within this class has been studied for a number of years. ZBLAN's theoretical attenuation coefficient is approximately 0.002 dB/km which is much better than that of fused silica at 0.2 dB/km. However, due to impurities and crystallites the attenuation coefficients achieved to date are considerably larger than those of fused silica. Impurities can be controlled with better processing techniques. Crystallization has been found to be a function of gravity. It is found that heating to the crystallization temperature in unit gravity results in crystallization while heating in reduced gravity does not. The exact mechanism for this phenomenon is not known but is speculated to be related to stress.

Tucker, Dennis S.↗

NASA NTRS1998

A Study of Undercooling Behavior Of Immiscible Metal Alloys in the Absence of Crucible-Induced Nucleation

The purpose of this study is to investigate the question: Would eliminating the crucible eliminate the wall-induced nucleation of one of the liquid phases in an immiscible alloy and result in undercooling of the liquid into the metastable region thereby producing significant differences in the separation process and the microstructure upon solidification. Another primary objective of this research is to study systems with a metastable miscibility gap and to directly determine the metastable liquid miscibility gap by undercooling experiments. Nucleation and growth of droplets in these undercooled metallic liquid-liquid mixtures is also being studied. Results of this investigation indicate that containerless processing of immiscibles may not promote the undercooling of the single-phase liquid into the metastable region. Although no recalescence event was observed for this liquid-liquid transition, undercooling did occur across the miscibility gap for the solidification of the Ti phase that eventually separated.

Robinson, Michael B.↗

NASA NTRS1995

Apparatus For Making Glass Fibers Without The Aid Of Gravity

Report describes apparatus for making optical fibers in microgravity. Includes sting that makes initial contact with softened glass to start drawing fiber. Absence of gravity helps to suppress nucleation of crystallites, which increase scattering of light and thus reduce transmission of light along fiber.

Tucker, Dennis↗

NASA NTRS1991

Test equipment data package for the KC-135 fiber pulling apparatus

The Fiber Pulling Apparatus (FPA) is a device designed to produce continuous glass fibers from simulated lunar soil, and to determine the effects of reduced gravity, specifically 1/6 g on fiber formation and resultant properties. Briefly, pre-melt simulated lunar soil will be placed in a pint crucible and heated to 1200 C or higher, up to a maximum temperature of 1400 C. At a given temperature, a quartz fiber will be immersed into the melt and then pulled through a chill block and wound onto a cylindrical bobbin using a servo motor control. A high resolution video camera will record the fiber as it is being pulled. This assembly wil be enclosed in Plexiglas. Before fiber pulling commences, the apparatus will be backfilled with dry nitrogen. A separate data acquisition system will support this apparatus. This system will contain a personal computer, video recorder, and monitor. Temperature, acceleration, winding speed, and video images will be controlled and recorded using the data acquisition system. Thus, the FPA will consist of two hardware packages, the fiber production assembly and the data acquisition rack. The primary objective of this test is to determine the effects of 1/6 g on the formation of continuous glass fiber made from simulated lunar soil. Baseline studies using the FPA on the ground will provide a reference for the 1/6 g studies. Of particular interest will be the effect of 1/6 g on the free fluid zone where the fiber exits the crucible. In the fiber spinning parlance this zone is known as the upper jet region, where the boundary slope is greater than one tenth. The properties of the resulting glass fiber will depend on the jet shape as well as distributions of velocity, temperature and tension within the jet. It is unknown at this time how 1/6 g will effect these parameters.

Kosten, Sue↗