Engineering topics

Worth, Daniel B.

Publications and source records attributed to Worth, Daniel B..

7 records

NASA NTRS2003

MB C220 Centering System Capacitor Fire

A detailed analysis of the MB C220 Centering System Capacitor Fire is presented. The topics include: 1) Description of Incident/Mishap; 2) System Block Diagram; 3) Fault Tree Analysis; 4) Inspection and Repair of Cabinet; 5) Discussions with GSFC Experts; 6) Electrical Measurements of Capacitors; 7) Other Research; 8) Discussions with Capacitor Manufacturers; 9) Findings/Root Cause; and 10) Recommendations. This paper is in viewgraph form.

Worth, Daniel B.↗

NASA NTRS2002

Abstracts for the 2002 Meeting of the AIAA Working Group on Dynamic Space Simulation

Undersampling is sometimes used in order to save memory and reducing digitizing speed requirements for pyroshock data. Many interpolation techniques have been used to estimate the missing peaks due undersampling. The more exotic techniques may not work well when real data that contains noise is used as an input. Various peak interpolation techniques will be evaluated using noisy data in this presentation.

Simpson, Alda D.↗

NASA NTRS2002

Goddard's New Data Analysis System

After evaluating the total lifetime costs of various commercial systems, it was determined that an in-house development would be more cost-effective in the long run. Matlab was chosen as the development platform, since it is now being taught to most engineering students. The presentation will discuss the specifications of the system.

Worth, Daniel B.↗

NASA NTRS2002

An Implementation of a Tracking Filter

For Goddard's new Matlab-based data analysis system, a Hilbert transform is used to generate a quadrature signal directly from the COLA signal. This differs from the usual practice of synthesizing the sine and cosine components after determining the sweep characteristics from the COLA signal. The original and quadrature signals are in turn mixed with the signal to be analyzed and then filtered to determine the frequency spectrum. This new technique appears to be more accurate in determining frequency and is insensitive to variations in COLA amplitude.

Worth, Daniel B.↗

NASA NTRS2000

Results of the HESSI Test Mishap Investigation

On March 21, 2000, the High-Energy Solar Spectroscopic Imager (HESSI) spacecraft was subjected to a series of vibration tests at the Jet Propulsion Laboratory (JPL) as a part of its flight certification program. The structural qualification test, denoted as the sineburst test, subjected the spacecraft to a major overtest that resulted in significant structural damage to the spacecraft. The HESSI Test Mishap Investigation Board (MIB) was formed on March 24, 2000, in response to a NASA headquarters request. Board membership included experts from NASA and the University of California at Berkeley. This paper will present the investigation methods, findings, and lessons learned from the HESSI mishap.

Worth, Daniel B.↗

NASA NTRS2000

Follow on Validation of Force-Limited Vibration Testing

A second sounding rocket experiment was performed in the summer of 1998 in a continuing effort to validate the force limits techniques used in random vibration tests. The accuracy of the force limiting prediction techniques has not clearly been sufficiently confirmed with in-flight data as of this time. The flight was on board one of the BlackBrant series of sounding rockets. This vehicle is the one most commonly used for suborbital scientific payloads by NASA. An aluminum double deck structure simulating a dynamic source and load was flown. The hardware was instrumented with accelerometers and force sensors that measured input acceleration, forces and acceleration responses on the load. Force limiting analysis methods are compared with the flight measurements in order to evaluate analysis predictions methods and test procedures. This sounding rocket flight is the second in a series of flights that will be performed.

Kaufman, Daniel S.↗

NASA NTRS1997

A Method for Implementing Force-Limited Vibration Control

NASA/GSFC has implemented force-limited vibration control on a controller which can only accept one profile. The method uses a personal computer based digital signal processing board to convert force and/or moment signals into what appears to he an acceleration signal to the controller. This technique allows test centers with older controllers to use the latest force-limited control techniques for random vibration testing. The paper describes the method, hardware, and test procedures used. An example from a test performed at NASA/GSFC is used as a guide.

Worth, Daniel B.↗