Engineering topics
Publications and source records attributed to Wriston, R. S..
Optical surfaces built for X-ray telescopes are made to reflect very short wavelengths that range in magnitude from 2 to 100 angstroms. Minor irregularities or contamination on sufrace of any telescope mirror can affect quality of optical image. Apparatus checks reflection of optical surfaces; scattering of X-rays is measured with angular accuracy of one arc-second.
A soft X-ray glancing incidence telescope mirror and a group of twelve optical flat samples were used to study the scattering of X-rays. The mirror was made of Kanigen coated beryllium and the images produced were severely limited by scattering of X-rays. The best resolution attained was about fifteen arc seconds. The telescope efficiency was found to be 0.0006. The X-ray beam reflected from the twelve optical flat samples was analyzed by means of a long vacuum system of special design for these tests. The scattering then decreased with increasing angle of incidence until a critical angle was passed. At larger angles the scattering increased again. The samples all scattered more at 44 A than at 8 A. Metal samples were found to have about the same scattering at 44 A but greater scattering at 8 A than glass samples.