Search NASA⌕ Search

Engineering topics

Wu, Baohua

Publications and source records attributed to Wu, Baohua.

13 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

High‐Speed Slot‐Die Coating with Donor‐Priority Rapid Aggregation Kinetics for Improved Morphology and Efficiency in Ecofriendly Organic Solar Cells

Abstract Solution‐processable organic solar cells (OSCs) represent a promising renewable photovoltaic technology with significant potential for eco‐compatible production. While high power conversion efficiencies (PCEs) have been achieved in OSCs, scaling this technology for high‐throughput manufacturing remains challenging. Key reason lies in the lack of efficient control strategies for the complex and long‐duration morphology evolution during high‐speed coating process with ecofriendly solvents. Here, a donor‐priority rapid aggregation process (DP‐RAP) scheme is proposed to solve this issue by adjusting the aggregation kinetics of donor and acceptor components. DP‐RAP enables blends with a nanoscale fiber network structure and favorable crystallinity, which contributes to balanced carrier transport and reduced recombination losses. As a result, the PCE is improved from 14.3% (reference) to 17.4% (DP‐RAP) for ultra‐high speed coated PM6:BTP‐eC9 devices in atmosphere, which is one of the highest values for non‐halogenated solvent‐processed solar cells at coating speeds of 500 mm s −1 . Moreover, the DP‐RAP based devices remain a stable PCE of approximately 17.4% across a broad range of coating speeds (20–500 mm s −1 ), illustrating its tolerance to the varied manufacturing conditions. This work highlights a promising avenue for the high‐speed, ecofriendly production of efficient OSCs, pushing the boundaries of practical manufacturing in renewable energy technologies.

Chemistry↗
DOE OSTI2024

High‐Performance Ternary Organic Solar Cells with Enhanced Luminescence Efficiency and Miscibility Enabled by Two Compatible Acceptors

Abstract The ternary strategy has proven to be an effective method for improving the efficiency of organic solar cells (OSCs). However, designing and selecting the third component still pose challenges. In this study, this issue is addressed by focusing on the PBDB‐T:Y18‐F binary system and introducing a new, strong luminescent, asymmetric small‐molecule acceptor (SMA) called L8‐CBIC‐Cl, which shares a similar skeleton with Y18‐F. The similarity in molecular framework facilitates good compatibility between the two acceptors, resulting in the formation of an alloy‐like acceptor phase. Furthermore, the norbornenyl‐modified end group in L8‐CBIC‐Cl contributes to its strong luminescent properties, which in turn leads to a low non‐radiative energy loss and a high open‐circuit voltage. Consequently, the PBDB‐T:L8‐CBIC‐Cl:Y18‐F based ternary devices realize a high power conversion efficiency (PCE) up to 17.01%, which is higher than PBDB‐T:Y18‐F device (14.49%). Importantly, L8‐CBIC‐Cl exhibits a good universality as a guest acceptor in other three binary systems (D18:Y6, D18:BTP‐eC9‐4F, and D18:L8‐BO). The D18:L8‐BO:L8‐CBIC‐Cl device shows an impressive efficiency of 19%. The work demonstrates that employing SMA with a high PLQY and better miscibility with host acceptor as the third component has a great potential for developing high‐efficiency ternary OSCs.

Chemistry↗
DOE OSTI2023

Progressive evolutions of non-fused ring electron acceptors toward efficient organic solar cells with improved photocurrent and reduced energy loss

Resolving competitive counterbalance between high external quantum efficiency (EQE) response and low energy loss is critical for achieving efficient organic solar cells (OSCs), including those based on low-cost non-fused-ring electron acceptor (NFREA). In this work, we performed a comparable study by utilizing four NFREAs with progressive evolutions in molecular structures, energetic levels, spectral coverages, crystallinity, etc, to pair with polymer donor J52. By regulating the terminal and side chains of NFREAs, the enhanced intramolecular charge transfer (ICT) effect allows O-PC-EH possessing the broader spectral coverage for higher photocurrent, the reduced energetic offset enables O-PC-EH-based device owning higher luminescence property for lower energy loss, the strengthened crystallinity endows O-PC-EH-based blend better charge transport property for less charge recombination. With those comprehensive managements from molecule to blend properties, the J52:O-PC-EH-based OSCs achieved the best efficiency of 14.4% (certified: 14.1%) with benefits in all the three device parameters. Here, this work reveals the importance of fine-tuning molecular structures of NFREAs according to paired polymer donor for maximizing the device performances.

14 SOLAR ENERGY↗
DOE OSTI2023

A simple-structured benzo[1,2-b:4,5-b’]dithiophene-based molecule as a third component enables organic solar cells with over 18.2% efficiency

In this study, research has shown that ternary strategy is an effective tool for improving the performance of organic solar cells (OSCs) and simple-structured small molecules with low-cost and wide bandgap which broadens the scope of the choice in third components recently attracted the attention of researchers. Herein, a small molecule with benzo[1,2-b:4,5-b’]dithiophene (BDT) core named BR-C12 which mixed well with PM6 has been designed and synthesized. Incorporating BR-C12 as third component into PM6:Y6, BR-C12 exhibits a complementary absorption with PM6 and Y6, promoted exciton dissociation and charge collection, reduced bimolecular recombination, resulting in more ordered molecular packing. The PM6:Y6:BR-C12 (1:1.2:0.1, weight ratio) OSC shows an improved power conversion efficiency (PCE) of 17.02% in comparison to host binary devises (16.42%). In addition, by employing BR-C12 as third component into PM6:L8-BO, the ternary device based on PM6:L8-BO:BR-C12 also achieves significant enhancement in device photovoltaic performance with a PCE of 18.26%. In addition, BR-C12-added ternary devices exhibit improved stability than binary ones. This work presents a method for constructing high-performance ternary OSCs and enriches the abundance of materials for the third components.

14 SOLAR ENERGY↗
DOE OSTI2023

Simultaneous Improvements in Efficiency and Stability of Organic Solar Cells via a Symmetric‐Asymmetric Dual‐Acceptor Strategy

Abstract Simultaneously achieving improvements in power conversion efficiency (PCE) and stability is the main task of the current development stage of organic solar cells (OSCs). This work reports a symmetry–asymmetry dual‐acceptor (SADA) strategy to construct ternary devices, which is found to be feasible for increasing both the PCE and the operational lifetime of OSCs. In this contribution, the symmetric acceptor L8‐BO and the asymmetric acceptor BTP‐S9 are blended in equal proportions with polymer donor PM6 for the consideration of absorption spectrum complementarity and cascade energetic alignment. In addition, the features of crystallinity and miscibility of the dual‐acceptor deliver optimized morphology lead to a high PCE of 18.84%. In addition, the asymmetric acceptor BTP‐S9 with a larger dipole moment shows tighter molecular stacking and longer crystal correlation length, which favor intrinsic molecular photostability, and further consolidate the operational lifetime of OSCs when coordinated with L8‐BO. This work demonstrates the efficacy of the SADA strategy for constructing efficient and stable OSCs.

Chemistry↗
DOE OSTI2023

Unveiling the Morphological and Physical Mechanism of Burn–in Loss Alleviation by Ternary Matrix Toward Stable and Efficient All–Polymer Solar Cells

All–polymer solar cells (All–PSCs) are considered the most promising candidate in achieving both efficient and stable organic photovoltaic devices, yet the field has rarely presented an in–depth understanding of corresponding device stability while efficiency is continuously boosted via the innovation of polymer acceptors. Herein, a ternary matrix is built for all–PSCs with optimized morphology, improved film ductility and importantly, boosted efficiency and better operational stability than its parental binary counterparts, as a platform to study the underlying mechanism. The target system PQM–Cl:PTQ10:PY–IT (0.8:0.2:1.2) exhibits an alleviated burn–in loss of morphology and efficiency under light soaking, which supports its promoted device lifetime. The comprehensive characterizations of fresh and light–soaked active layers lead to a clear illustration of opposite morphological and physical degradation direction of PQM–Cl and PTQ10, thus resulting in a delicate balance at the optimal ternary system. Specifically, the enlarging tendency of PQM–Cl and shrinking preference of PTQ10 in terms of phase separation leads to a stable morphology in their mixing phase; the hole transfer kinetics of PQM–Cl:PY–IT host is stabilized by incorporating PTQ10. Finally, this work succeeds in reaching a deep insight into all–PSC's stability promotion by a rational ternary design, which booms the prospect of gaining high–performance all–PSCs.

14 SOLAR ENERGY↗
DOE OSTI2023

19.28% Efficiency and Stable Polymer Solar Cells Enabled by Introducing an NIR–Absorbing Guest Acceptor

Here, a near-infrared (NIR)-absorbing small-molecule acceptor (SMA) Y-SeNF with strong intermolecular interaction and crystallinity is developed by combining selenophene-fused core with naphthalene-containing end-group, and then as a custom-tailor guest acceptor is incorporated into the binary PM6:L8-BO host system. Y-SeNF shows a 65 nm red-shifted absorption compared to L8-BO. Thanks to the strong crystallinity and intermolecular interaction of Y-SeNF, the morphology of PM6:L8-BO:Y-SeNF can be precisely regulated by introducing Y-SeNF, achieving improved charge-transporting and suppressed non-radiative energy loss. Consequently, ternary polymer solar cells (PSCs) offer an impressive device efficiency of 19.28% with both high photovoltage (0.873 V) and photocurrent (27.88 mA cm –2 ), which is one of the highest efficiencies in reported single-junction PSCs. Notably, ternary PSC has excellent stability under maximum-power-point tracking for even over 200 h, which is better than its parental binary devices. The study provides a novel strategy to construct NIR-absorbing SMA for efficient and stable PSCs toward practical applications.

14 SOLAR ENERGY↗
DOE OSTI2022

Enhance the performance of organic solar cells by nonfused ring electron acceptors bearing a pendent perylenediimide group

A new nonfused ring electron acceptor PDI-DO-2F is designed and synthesized by attaching perylenediimide (PDI) unit as a pendent group to the central donor core. Compared with the control molecule DO-2F, the introduction of PDI lateral substituent can greatly enhance the solubility and decrease the crystallinity of the resulted acceptor. The PBDB-T:PDI-DO-2F blend film exhibits a much better morphology with higher and more balanced carrier mobility in contrast to PBDB-T:DO-2F one. PDI-DO-2F based organic solar cells (OSCs) give a power conversion efficiency (PCE) of 11.78%, higher than DO-2F based ones (9.82%). Furthermore, PDI-DO-2F based OSCs shows a ΔE non-rad value of 0.23 eV, which is significantly lower than the DO-2F based ones (0.28 eV). More importantly, the addition of PDI-DO-2F as the third component to the PBDB-T:DO-2F binary system can optimize the morphology of blend films and improve the shelf stability of devices. Finally, the PBDB-T:DO-2F:PDI-DO-2F based ternary OSCs achieve a higher PCE of 13.82%.

14 SOLAR ENERGY↗
DOE OSTI2022

Versatile Sequential Casting Processing for Highly Efficient and Stable Binary Organic Photovoltaics

Forming an ideal bulk heterojunction (BHJ) morphology is a critical issue governing the photon to electron process in organic solar cells (OSCs). Complementary to the widely-used blend casting (BC) method for BHJ construction, sequential casting (SC) can also enable similar or even better morphology and device performance for OSCs. Here, BC and SC methods on three representative donor:acceptor (D:A) blends are utilized, that is, PM6:PC 71 BM, PM6:IT-4F and PM6:L8-BO. Higher power conversion efficiencies (PCEs) in all cases by taking advantage of beneficial morphology from SC processing are achieved, and a champion PCE of 18.86% (certified as 18.44%) based on the PM6:L8-BO blend is reached, representing the record value among binary OSCs. The observations on phase separation and vertical distribution inspire the proposal of the swelling–intercalation phase-separation model to interpret the morphology evolution during SC processing. Further, the vertical phase segregation is found to deliver an improvement of device performance via affecting the charge transport and collection processes, as evidenced by the D:A-ratio-dependent photovoltaic properties. Besides, OSCs based on SC processing show advantages on device photostability and upscale fabrication. Finally, this work demonstrates the versatility and efficacy of the SC method for BHJ-based OSCs.

14 SOLAR ENERGY↗
DOE OSTI2022

Kinetic processes of phase separation and aggregation behaviors in slot-die processed high efficiency Y6-based organic solar cells

Morphological optimization has proved to be one crucial factor contributing to the 19% efficiency of Y6-based organic solar cells (OSCs). Although the relationship between component miscibility and film morphology has been established, it has not been clarified how the film formation processes proceed, especially for methods compatible with large-area fabrication, i.e. slot-die coating, which restricts the further optimization of the morphology. Herein, we comprehensively investigate the effect of miscibility and the film-formation kinetic process on film morphology during processing with different solvents. A highest power conversion efficiency (PCE) of 17.38% can be obtained in a D18:Y6 device processed with slot-die coating in an open-air environment. However, due to their relatively poor miscibility, incorporating a trace amount of chlorobenzene (CB) into CF can sufficiently promote Y6 aggregation, leading to increased phase separation and thus the average PCE drops to 15.16%. In contrast, a PM6:Y6 blend shows insensitive changes in the kinetic process as well as the final morphology, and thus in the comparable PCEs when cast with different solvents, which is ascribed to their relatively good miscibility. As a result, this work provides scientific guidelines for device optimization by combining the intermediate gap from miscibility to kinetic process and their impact on final morphology.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

High-Performance Non-fullerene organic solar cells enabled by noncovalent Conformational locks and Side-Chain engineering

Three novel small molecular acceptors (SMAs) BO-2F, BO-C8-2F and BO-C2C6-C8-2F were designed and synthesized. These acceptors all possess planar molecular backbone because of the introduction of intramolecular noncovalent interaction. Among them, BO-C2C6-C8-2F with four side chains, which has the highest solubility, can form more appropriate nanomorphology when blending with PBDB-T. Hence, organic solar cells (OSCs) based on PBDB-T:BO-C2C6-C8-2F displayed an outstanding power convesion efficiency (PCE) of 14.25%, which is higher than BO-2F and BO-C8-2F based ones. To the best of our knowledge, the PCE of 14.25% is one of the highest for the OSCs based on A-π-D-π-A type SMAs. Finally, our results have demonstrated that the combination of side-chain engineering and intramolecular conformation lock has a great prospect in the design of high performance SMAs for OSCs.

14 SOLAR ENERGY↗