The sequence–structure–function relationship of intrinsic ERα disorder
Not provided.
Engineering topics
Publications and source records attributed to Wu, Chen.
Not provided.
Microwave impedance microscopy (MIM) has been utilized to directly visualize topological edge states in many quantum materials. While the microwave response for conventional metals and insulators can be accurately quantified using simple lumped-element circuits, whose applicability to more exotic quantum systems remain limited. In this work, we present a general theoretical framework of the MIM response of arbitrary quantum materials. Applying it to topological edge states in a Chern insulator predicts an enhanced MIM response at the crystal boundaries due to collective edge magnetoplasmon (EMP) excitations. The unique resonance frequency of these plasmonic modes allows one to disentangle the signatures of topological versus trivial edge states. To benchmark our analytical predictions, we experimentally probe the MIM response of quantum anomalous Hall edge states in a Cr-doped (Bi,Sb) 2 Te 3 topological insulator and perform numerical simulations using a classical formulation of the EMP modes based on this realistic tip-sample geometry, both of which yield results consistent with our theoretical picture. Here we also show how the technique of MIM can be used to quantitatively extract the topological invariant of a Chern insulator and shed light on the microscopic nature of dissipation along the crystal boundaries.
A key aspect of how the brain learns and enables decision-making processes is through synaptic interactions. Electrical transmission and communication in a network of synapses are modulated by extracellular fields generated by ionic chemical gradients. Emulating such spatial interactions in synthetic networks can be of potential use for neuromorphic learning and the hardware implementation of artificial intelligence. Here, in this work, we demonstrate that in a network of hydrogen-doped perovskite nickelate devices, electric bias across a single junction can tune the coupling strength between the neighboring cells. Electrical transport measurements and spatially resolved diffraction and nanoprobe X-ray and scanning microwave impedance spectroscopic studies suggest that graded proton distribution in the inhomogeneous medium of hydrogen-doped nickelate film enables this behavior. We further demonstrate signal integration through the coupling of various junctions.
Heavy charged particles after nuclear muon capture are an important nuclear physics background to the muon-to-electron conversion experiments Mu2e and COMET, which will search for charged lepton flavor violation at an unprecedented level of sensitivity. Here, the AlCap experiment aimed to measure the yield and energy spectra of protons, deuterons, tritons, and α particles emitted after the nuclear capture of muons stopped in Al, Si, and Ti in the low-energy range relevant for the muon-to-electron conversion experiments. Individual charged particle types were identified in layered silicon detector packages and their initial energy distributions were unfolded from the observed energy spectra.
This work presents a workflow for simulating and processing the full-scale low-frequency telescope data of the Square Kilometre Array (SKA) Phase 1. The SKA project will enter the construction phase soon, and once completed, it will be the world’s largest radio telescope and one of the world’s largest data generators. The authors used Summit to mimic an endto-end SKA workflow, simulating a dataset of a typical 6 hour observation and then processing that dataset with an imaging pipeline. This workflow was deployed and run on 4,560 compute nodes, and used 27,360 GPUs to generate 2.6 PB of data. This was the first time that radio astronomical data were processed at this scale. Results show that the workflow has the capability to process one of the key SKA science cases, an Epoch of Reionization observation. This analysis also helps reveal critical design factors for the next-generation radio telescopes and the required dedicated processing facilities.
Aqueous Al-ion batteries (AAIBs) are the subject of great interest due to the inherent safety and high theoretical capacity of aluminum. The high abundancy and easy accessibility of aluminum raw materials further make AAIBs appealing for grid-scale energy storage. However, the passivating oxide film formation and hydrogen side reactions at the aluminum anode as well as limited availability of the cathode lead to low discharge voltage and poor cycling stability. Here, we proposed a new AAIB system consisting of an Al x MnO 2 cathode, a zinc substrate-supported Zn-Al alloy anode, and an Al(OTF) 3 aqueous electrolyte. Through the in situ electrochemical activation of MnO, the cathode was synthesized to incorporate a two-electron reaction, thus enabling its high theoretical capacity. The anode was realized by a simple deposition process of Al 3+ onto Zn foil substrate. The featured alloy interface layer can effectively alleviate the passivation and suppress the dendrite growth, ensuring ultralong-term stable aluminum stripping/plating. The architected cell delivers a record-high discharge voltage plateau near 1.6 V and specific capacity of 460 mAh g -1 for over 80 cycles. Finally, this work provides new opportunities for the development of high-performance and low-cost AAIBs for practical applications.
Giant low-field magnetostriction has been achieved in pseudobinary Laves phase compounds RR’T 2 (R and R’: rare earth elements; T: transition metal elements) around the ferromagnetic - ferromagnetic (ferro.-ferro.) transition temperature. Evolution of the magnetic structure across such transition requires comprehensive investigation. In this work, pseudobinary system Tb(Co 1-x Fe x ) 2 is selected to investigate the evolution of local magnetic moment, for which two end terminals TbCo 2 and TbFe 2 possess the rhombohedral (R) structure at the ferromagnetic state but with different magnetic ordering temperatures (T C ). Magnetometry measurements reveal that a composition independent ferromagnetic - ferromagnetic transition occurs at ~100 K despite the increased Curie temperature T C with raised Fe concentration in the Tb(Co 1-x Fe x ) 2 . Synchrotron XRD data reveal that both the lattice parameter and the lattice strain along the <111> direction are abnormally temperature dependent, accompanied with experimentally observed magnetostriction abnormality at 100 K. In-situ neutron powder diffraction (NPD) results show that the local magnetic moments of T2 (9e site) atoms are also abnormally temperature dependent, which is larger at 100 K than that at a lower temperature 50 K. Such findings indicate close correlations between the magnetic structure and the magnetostrictive effect in the pseudobinary RT 2 compounds.
A microplasma generator includes first and second conductive resonators disposed on a first surface of a dielectric substrate. The first and second conductive resonators are arranged in line with one another with a gap defined between a first end of each resonator. A ground plane is disposed on a second surface of the dielectric substrate and a second end of each of the first and second resonators is coupled to the ground plane. A power input connector is coupled to the first resonator at a first predetermined distance from the second end chosen as a function of the impedance of the first conductive resonator. A microplasma generating array includes a number of resonators in a dielectric material substrate with one end of each resonator coupled to ground. A micro-plasma is generated at the non-grounded end of each resonator. The substrate includes a ground electrode and the microplasmas are generated between the non-grounded end of the resonator and the ground electrode. The coupling of each resonator to ground may be made through controlled switches in order to turn each resonator off or on and therefore control where and when a microplasma will be created in the array.
Purpose: To investigate whether single nucleotide polymorphisms (SNPs) in the ataxia telangiectasia mutated (ATM) gene are associated with survival in patients with esophageal squamous cell carcinoma (ESCC) receiving radiation therapy or chemoradiation therapy or surgery only. Methods and Materials: Four tagSNPs of ATM were genotyped in 412 individuals with clinical stage III or IV ESCC receiving radiation therapy or chemoradiation therapy, and in 388 individuals with stage I, II, or III ESCC treated with surgery only. Overall survival time of ESCC among different genotypes was estimated by Kaplan-Meier plot, and the significance was examined by log-rank test. The hazard ratios (HRs) and 95% confidence intervals (CIs) for death from ESCC among different genotypes were computed by a Cox proportional regression model. Results: We found 2 SNPs, rs664143 and rs664677, associated with survival time of ESCC patients receiving radiation therapy. Individuals with the rs664143A allele had poorer median survival time compared with the rs664143G allele (14.0 vs 20.0 months), with the HR for death being 1.45 (95% CI 1.12-1.89). Individuals with the rs664677C allele also had worse median survival time than those with the rs664677T allele (14.0 vs 23.5 months), with the HR of 1.57 (95% CI 1.18-2.08). Stratified analysis showed that these associations were present in both stage III and IV cancer and different radiation therapy techniques. Significant associations were also found between the SNPs and locosregional progression or progression-free survival. No association between these SNPs and survival time was detected in ESCC patients treated with surgery only. Conclusion: These results suggest that the ATM polymorphisms might serve as independent biomarkers for predicting prognosis in ESCC patients receiving radiation therapy.