New Observational Constraints on Warm Rain Processes and Their Climate Implications
Explore the source record for details and available documents.
54 ENVIRONMENTAL SCIENCES↗
Engineering topics
Wu, Peng
Publications and source records attributed to Wu, Peng.
Impacts of long-range transport of aerosols on marine-boundary-layer clouds in the eastern North Atlantic
Vertical profiles of aerosols are inadequately observed and poorly represented in climate models, contributing to the current large uncertainty associated with aerosol–cloud interactions. The US Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) Aerosol and Cloud Experiments in the Eastern North Atlantic (ACE-ENA) aircraft field campaign near the Azores islands provided ample observations of vertical distributions of aerosol and cloud properties. Here we utilize the in situ aircraft measurements from the ACE-ENA and ground-based remote-sensing data along with an aerosol-aware Weather Research and Forecast (WRF) model to characterize the aerosols due to long-range transport over a remote region and to assess their possible influence on marine-boundary-layer (MBL) clouds. The vertical profiles of aerosol and cloud properties measured via aircraft during the ACE-ENA campaign provide detailed information revealing the physical contact between transported aerosols and MBL clouds. The European Centre for Medium-Range Weather Forecasts Copernicus Atmosphere Monitoring Service (ECMWF-CAMS) aerosol reanalysis data can reproduce the key features of aerosol vertical profiles in the remote region. The cloud-resolving WRF sensitivity experiments with distinctive aerosol profiles suggest that the transported aerosols and MBL cloud interactions (ACIs) require not only aerosol plumes to get close to the marine-boundary-layer top but also large cloud top height variations. Based on those criteria, the observations show that the occurrence of ACIs involving the transport of aerosol over the eastern North Atlantic (ENA) is about 62 % in summer. For the case with noticeable long-range-transport aerosol effects on MBL clouds, the susceptibilities of droplet effective radius and liquid water content are -0.11 and +0.14, respectively. When varying by a similar magnitude, aerosols originating from the boundary layer exert larger microphysical influence on MBL clouds than those entrained from the free troposphere.
54 ENVIRONMENTAL SCIENCES↗
A Climatology of Marine Boundary Layer Cloud and Drizzle Properties derived from Ground-based Observations over the Azores
In this study, more than four years of ground-based observations and retrievals were collected and analyzed to investigate the seasonal and diurnal variations of single-layered MBL (with three subsets: non-drizzling, virga and rain) cloud and drizzle properties, as well as their vertical and horizontal variations. The annual mean drizzle frequency was ~55%, with ~70% in winter and ~45% in summer. The cloud-top (-base) height for rain clouds was the highest (lowest), resulted in the deepest cloud layer (0.8 km), which is four (two) times of non-drizzling (virga) clouds. The retrieved cloud-droplet effective radii (rc) were the largest (smallest) for rain (non-drizzling) clouds, and the nighttime values were greater than the daytime values. Drizzle number concentration (Nd) and liquid water content (LWCd) were three and one order(s) lower than their cloud counterparts. The rc and LWCc increased from the cloud base to ???? = ~0.75 by condensational growth, while drizzle median radii (rd) increased from the cloud top downwards the cloud base by collision-coalescence. The adiabaticity values monotonically increased from the cloud top to the cloud base with maxima of ~0.7 (0.3) for non-drizzling (rain) clouds. The drizzling process decreases the adiabaticity by 0.25 to 0.4, and the cloud-top entrainment mixing impacts as deep as upper 40% of the cloud layers. Cloud and drizzle homogeneities decreased with increased horizontal sampling lengths. Cloud homogeneity increases with increasing cloud fraction. These results can serve as baselines for studying MBL cloud-to-rain conversion and growth processes over the Azores.
Wu, Peng↗
A Climatology of Marine Boundary Layer Cloud and Drizzle Properties Derived from Ground-Based Observations over the Azores
Explore the source record for details and available documents.
54 ENVIRONMENTAL SCIENCES↗
Quantifying long-term seasonal and regional impacts of North American fire activity on continental boundary layer aerosols and cloud condensation nuclei
An intimate knowledge of aerosol transport is essential in reducing the uncertainty of the impacts of aerosols on cloud development. Datasets from the U. S. Department of Energy (DOE) Atmospheric Radiation Measurement platform in the Southern Great Plains region (ARM-SGP) and the NASA Modern-Era Retrospective Analysis for Research and Applications, version 2 (MERRA-2) showed seasonal increases in aerosol loading and total carbon concentration during the spring and summer months (2008-2016) which was attributed to fire activity and smoke transport within North America. The monthly mean MERRA-2 surface carbonaceous aerosol mass concentration and ARM-SGP total carbon products were strongly correlated (R=0.82, p<0.01) along with a moderate correlation with the ARM-SGP cloud condensation nuclei (N CCN ) product (0.5, p~0.1). The monthly mean ARM-SGP total carbon and N CCN products were strongly correlated (0.7, p~0.01). An additional product denoting fire number and coverage taken from the National Interagency Fire Center (NIFC) showed a moderate correlation with the MERRA-2 carbonaceous product (0.45, p<0.01) during the 1981-2016 warm season months (March-September). With respect to meteorological conditions, the correlation between the NIFC fire product and MERRA-2 850 hPa isobaric height anomalies was lower (0.26, p~0.13) due to the variability in the frequency, intensity, and number of fires in North America. An observed increase in the isobaric height anomaly during the past decade may lead to frequent synoptic ridging and drier conditions with more fires, thereby potentially impacting cloud/precipitation processes and decreasing air quality.
54 ENVIRONMENTAL SCIENCES↗
Air mass back trajectories during cold-air outbreaks (CAOs) at Andenes and Bear Island, Norway
For each CAO hour identified from interpolated sounding, a 36-hour back trajectory was calculated using the NOAA HYSPLIT model. We used three different meteorological data as inputs to HYSPLIT: GFS 0.25 deg, GDSA 1deg, and NCEP/NCAR Reanalysis. The trajectories were calculated at four elevations: 500 m, 1000 m, 2000 m, and 5000 m. Locations (latitudes and longitudes) for each hour of the trajectory were reported in the data files.
54 ENVIRONMENTAL SCIENCES↗
Prediction of Tropical Cyclone Intensity Change using Advance Machine Learning Techniques
A tropical cyclone (TC) is a rapidly rotating storm system characterized by a lowpressure center, a closed low-level atmospheric circulation, strong winds, and a spiral arrangement of thunderstorms that produce heavy rain or squalls. TC occurs when the sea temperatures are high, and the air above the warm ocean is heated and rises quickly, causing an area of very low pressure, and then drawing more warm moist air, leading to strong winds. The air cools and condenses when rising, so that cumulonimbus clouds formed and produce heavy rainfall. These high winds, excessive rainfall and flooding threaten lives and property.
54 ENVIRONMENTAL SCIENCES↗
Estimation of liquid water path below the melting layer in stratiform precipitation systems using radar measurements during MC3E
In this study, the liquid water path (LWP) below the melting layer in stratiform precipitation systems is retrieved, which is a combination of rain liquid water path (RLWP) and cloud liquid water path (CLWP). The retrieval algorithm uses measurements from the vertically pointing radars (VPRs) at 35 and 3 GHz operated by the US Department of Energy Atmospheric Radiation Measurement (ARM) and National Oceanic and Atmospheric Administration (NOAA) during the field campaign Midlatitude Continental Convective Clouds Experiment (MC3E). The measured radar reflectivity and mean Doppler velocity from both VPRs and spectrum width from the 35 GHz radar are utilized. With the aid of the cloud base detected by a ceilometer, the LWP in the liquid layer is retrieved under two different situations: (I) no cloud exists below the melting base, and (II) cloud exists below the melting base. In (I), LWP is primarily contributed from raindrops only, i.e., RLWP, which is estimated by analyzing the Doppler velocity differences between two VPRs. In (II), cloud particles and raindrops coexist below the melting base. The CLWP is estimated using a modified attenuation-based algorithm. Two stratiform precipitation cases (20 and 11 May 2011) during MC3E are illustrated for two situations, respectively. With a total of 13 h of samples during MC3E, statistical results show that the occurrence of cloud particles below the melting base is low (9 %); however, the mean CLWP value can be up to 0.56 kg m -2 , which is much larger than the RLWP (0.10 kg m -2 ). When only raindrops exist below the melting base, the average RLWP value is larger (0.32 kg m -2 ) than the with-cloud situation. The overall mean LWP below the melting base is 0.34 kg m -2 for stratiform systems during MC3E.
54 ENVIRONMENTAL SCIENCES↗
Catalysts in Coronas: A Surface Spatial Confinement Strategy for High-Performance Catalysts in Methane Dry Reforming
One of the grand challenges in industrial catalytic processes is the inevitable sintering and aggregation of conventional supported catalysts to large particles, leading to the decrease of activity and even deactivation with time. Herein, a surface spatial confinement strategy was employed to design high-performing catalysts for the dry reforming of methane (DRM). Specifically, active nickel (Ni) nanoparticles (NPs) were confined on the surface of a dendritic mesoporous silica (DMS) in the form of the “catalysts in coronas”. The Ni/DMS catalyst exhibited a high catalytic performance close to its equilibrium conversion (76% conversion for CH4 at 700 °C). More importantly, the prepared catalyst remained stable after 145 h time-on-stream at 700 °C without noticeable carbon deposition. This sintering and coking resistance was found to arise from the surface spatial confinement effect in which the three-dimensional dendritic layers in the corona posted a steric barrier against migration and aggregation of Ni NPs and size of Ni NPs was controlled below 5 nm, hence against sintering and coking. Meanwhile, the mesoporous feature of the layered wall facilitated mass transport of reactants to Ni species and further boosted catalysis. This strategy should be broadly applicable to a range of metal- and metal oxide-supported catalysts in high-temperature heterogeneous reactions, such as DRM, water gas shift reaction, and vehicle emission control related reactions.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Active and stable Pt-Ceria nanowires@silica shell catalyst: Design, formation mechanism and total oxidation of CO and toluene
Cerium oxide is one of the most important rare earth metal oxides in catalysis, however, the sintering problem of noble metals and CeO 2 at higher temperature (e.g., >700 °C) is still unresolved. Herein, Pt nanoparticles self-assembled on ultra-thin CeO 2 nanowires (NWs) and then confined inside a thermally robust porous silica shell (Pt-CeO2NW@SiO 2 ) were introduced. The thickness of CeO 2 NWs was just ~2.0 nm. Moreover, Pt-CeO 2 NW@SiO 2 showed significantly enhanced catalytic performances for total oxidation of CO and toluene. The increased catalytic properties are attributed to the strong metal-support interaction effect between Pt and CeO 2 NWs at sub-nanoscale. Most importantly, the special core-shell structure also affords excellent sintering resistance retention up to 700 °C for 100 h, due to the guarding effect of porous silica shell. Finally, the formation mechanism of Pt-CeO 2 NW@SiO 2 was investigated in detail. Current strategy should inspire many rational designs of rare-earth metal-based nanocatalysts for real-world catalysts.
36 MATERIALS SCIENCE↗
Localization-length exponent in two models of quantum Hall plateau transitions
Motivated by the recent numerical studies on the Chalker-Coddington network model that found a larger-than-expected critical exponent of the localization length characterizing the integer quantum Hall plateau transitions, we revisited the exponent calculation in the continuum model and in the lattice model, both projected to the lowest Landau level or subband. Combining scaling results with or without the corrections of an irrelevant length scale, we obtain ν = 2.48 ± 0.02, which is larger but still consistent with the earlier results in the two models, unlike what was found recently in the network model. Here, the scaling of the total number of conducting states, as determined by the Chern number calculation, is accompanied by an effective irrelevant length scale exponent y = 4.3 in the lattice model, indicating that the irrelevant perturbations are insignificant in the topology number calculation.
2-dimensional systems↗
Long noncoding RNA LINC00165-induced by STAT3 exerts oncogenic properties via interaction with Polycomb Repressive Complex 2 to promote EMT in gastric cancer
Long non-coding RNAs (lncRNAs) are a crucial member of the non-coding RNA family, and increasing evidence demonstrates that lncRNAs participate in the initiation and progression of cancers. Our study aimed to explore the role of the lncRNA LINC00165 in gastric cancer (GC) development. In the present study, our results showed that LINC00165 was upregulated in GC tissues and cell lines and high expression of LINC00165 was correlated with tumor-node-metastasis stage, invasion depth, and overall survival of GC patients. Functional assays showed that LINC00165 knockdown inhibited the proliferation, migration and invasion of GC cells and LINC00165 overexpression stimulated their proliferation, migration and invasion. Online transcription factor binding site prediction analysis showed that there were STAT3 binding sites in the LINC00165 promoter region. Furthermore, luciferase reporter and chromatin immunoprecipitation assays provided evidence that STAT3 could bind directly to the region between −547 bp to −537 bp (ATGTTGGGAAA) of LINC00165 promoter and activate its transcription. Then GC cells were partitioned into nuclear and cytoplasmic fractions and we found that LINC00165 was localized preferentially to the nucleus. Mechanistically, we revealed that LINC00165 functioned as a scaffold for interaction with Polycomb Repressive Complex 2 to promote the epithelial-mesenchymal transition in GC cells. Taken together, our study revealed that LINC00165 was involved in the progression and poor prognosis of GC as an oncogenic role. Therefore, LINC00165 might become a new potential target for GC chemotherapy and further predict prognosis of patients.
60 APPLIED LIFE SCIENCES↗
Evaluation of autoconversion and accretion enhancement factors in general circulation model warm-rain parameterizations using ground-based measurements over the Azores
A great challenge in climate modeling is how to parameterize subgrid cloud processes, such as autoconversion and accretion in warm-rain formation. In this study, we use ground-based observations and retrievals over the Azores to investigate the so-called enhancement factors, E auto and E accr , which are often used in climate models to account for the influence of subgrid variance of cloud and precipitation water on the autoconversion and accretion processes. E auto and E accr are computed for different equivalent model grid sizes. The calculated E auto values increase from 1.96 (30 km) to 3.2 (180 km), and the calculated E accr values increase from 1.53 (30 km) to 1.76 (180 km). Comparing the prescribed enhancement factors in Morrison and Gettleman (2008, MG08) to the observed ones, we found that a higher E auto (3.2) at small grids and lower E accr (1.07) are used in MG08, which might explain why most of the general circulation models (GCMs) produce too-frequent precipitation events but with too-light precipitation intensity. The ratios of the rain to cloud water mixing ratio ( q r / q c ) at E accr =1.07 and E accr =2.0 are 0.063 and 0.142, respectively, from observations, further suggesting that the prescribed value of E accr =1.07 used in MG08 is too small to simulate precipitation intensity correctly. Both E auto and E accr increase when the boundary layer becomes less stable, and the values are larger in precipitating clouds ( CLWP>75 gm -2 ) than those in non-precipitating clouds ( CLWP<75 gm -2 ). Therefore, the selection of E auto and E accr values in GCMs should be regime- and resolution-dependent.
54 ENVIRONMENTAL SCIENCES↗
MicroRNA 148a-3p promotes Thrombospondin-4 expression and enhances angiogenesis during tendinopathy development by inhibiting Krüppel-like factor 6
Highlights: • MiR-148a-3p is downregulated in tendinopathy and positively correlated with CD34. • KLF6 is identified as a novel target of miR-148a-3p. • MiR-148a-3p/KLF6 regulates Tsp-4 expression of Tenocyte mediating angiogenesis during tendinopathy development. • The first study investigates the role of miR-148a-3p in angiogenesis of tendinopathy. Tendinopathy is a common musculoskeletal disorder with characteristic hypervascularity. The mechanism of angiogenesis in tendinopathy remains unclear. The present study aimed to investigate the roles of miR-148a-3p in angiogenesis development of tendinopathy. In this study, we demonstrated that miR-148a-3p expression was increased in tendinopathy tissues and positively correlated with CD34 levels which is a specific marker for angiogenesis. We identified Krüppel-like factor 6 (KLF6) as a direct target gene of miR-148a-3p in tenocytes. Furthermore, reduced levels of KLF6 in tendinopathy tissues was showed using qRT-PCR and immunohistochemical analysis, compared with controls. A negative correlation between the levels of KLF6 mRNA and miR-148a-3p was observed. Then, we verified that miR-148a-3p could regulate Tsp-4 expression by targeting KLF6 in tenocyte and was positively correlated with Tsp-4 levels in tendinopathy tissues. In a coculture system of tenocytes with endothelial cells (ECs), we observed that transfection of Lv-miR-148a-3p markedly upregulated EC angiogenesis. In summary, our data establish a novel molecular mechanism by which miR-148a-3p upregulates Tsp-4 expression in tenocytes to promote EC angiogenesis by targeting KLF6, which could be helpful for the treatment of tendinopathy in the future.
60 APPLIED LIFE SCIENCES↗
Multi-petascale highly efficient parallel supercomputer
A Multi-Petascale Highly Efficient Parallel Supercomputer of 100 petaflop-scale includes node architectures based upon System-On-a-Chip technology, where each processing node comprises a single Application Specific Integrated Circuit (ASIC). The ASIC nodes are interconnected by a five dimensional torus network that optimally maximize the throughput of packet communications between nodes and minimize latency. The network implements collective network and a global asynchronous network that provides global barrier and notification functions. Integrated in the node design include a list-based prefetcher. The memory system implements transaction memory, thread level speculation, and multiversioning cache that improves soft error rate at the same time and supports DMA functionality allowing for parallel processing message-passing.
97 MATHEMATICS AND COMPUTING↗
Bifluoride-catalysed sulfur(VI) fluoride exchange reaction for the synthesis of polysulfates and polysulfonates
Polysulfates and polysulfonates possess exceptional mechanical properties making them potentially valuable engineering polymers. However, they have been little explored due to a lack of reliable synthetic access. Here we report bifluoride salts (Q + [FHF] - , where Q + represents a wide range of cations) as powerful catalysts for the sulfur(VI) fluoride exchange (SuFEx) reaction between aryl silyl ethers and aryl fluorosulfates (or alkyl sulfonyl fluorides). The bifluoride salts are significantly more active in catalysing the SuFEx reaction compared to organosuperbases, therefore enabling much lower catalyst-loading (down to 0.05 mol%). Using this chemistry, we are able to prepare polysulfates and polysulfonates with high molecular weight, narrow polydispersity and excellent functional group tolerance. The process is practical with regard to the reduced cost of catalyst, polymer purification and by-product recycling. Here, we have also observed that the process is not sensitive to scale-up, which is essential for its future translation from laboratory research to industrial applications.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
SuFEx‐Based Polysulfonate Formation from Ethenesulfonyl Fluoride–Amine Adducts
Abstract The SuFEx‐based polycondensation between bisalkylsulfonyl fluorides (AA monomers) and bisphenol bis( t ‐butyldimethylsilyl) ethers (BB monomers) using [Ph 3 P=N−PPh 3 ] + [HF 2 ] − as the catalyst is described. The AA monomers were prepared via the highly reliable Michael addition of ethenesulfonyl fluoride and amines/anilines while the BB monomers were obtained from silylation of bisphenols by t ‐butyldimethylsilyl chloride. With these reactions, a remarkable diversity of monomeric building blocks was achieved by exploiting readily available amines, anilines, and bisphenols as starting materials. The SuFEx‐based polysulfonate formation reaction exhibited excellent efficiency and functional group tolerance, producing polysulfonates with a variety of side chain functionalities in >99 % conversion within 10 min to 1 h. When bearing an orthogonal group on the side chain, the polysulfonates can be further functionalized via click‐chemistry‐based post‐polymerization modification.
Wang, Hua↗
SuFEx-Based Polysulfonate Formation from Ethenesulfonyl Fluoride-Amine Adducts
In this article, the SuFEx-based polycondensation between bisalkylsulfonyl fluorides (AA monomers) and bisphenol bis(t-butyldimethylsilyl) ethers (BB monomers) using [Ph 3 P=N-PPh 3 ] + [HF 2 ] - as the catalyst is described. The AA monomers were prepared via the highly reliable Michael addition of ethenesulfonyl fluoride and amines/anilines while the BB monomers were obtained from silylation of bisphenols by t-butyldimethylsilyl chloride. With these reactions, a remarkable diversity of monomeric building blocks was achieved by exploiting readily available amines, anilines, and bisphenols as starting materials. The SuFEx-based polysulfonate formation reaction exhibited excellent efficiency and functional group tolerance, producing polysulfonates with a variety of side chain functionalities in >99 % conversion within 10 min to 1 h. When bearing an orthogonal group on the side chain, the polysulfonates can be further functionalized via click-chemistry-based post-polymerization modification.
36 MATERIALS SCIENCE↗