Engineering topics
Wu, R. Q.
Publications and source records attributed to Wu, R. Q..
Ferroelectric control of magnetic anisotropy of 5 d transition metal monolayers
Electric field control of magnetism using ferroelectric materials offers promising applications in low-power spintronics. We have conducted systematic density functional theory calculations to investigate the magnetic properties of epitaxial 5 d transition metal monolayers on a ferroelectric substrate: PbTiO 3 (PTO). Our study reveals that the magnetocrystalline anisotropy energy of the osmium monolayer is significantly enhanced to 18.1 meV/Os in the upward polarization state and, moreover, the anomalous Hall coefficient of osmium/PTO film is tunable by reversing the electric polarization of the PTO substrate. Additionally, the electric polarization reversal in PTO rotates the easy magnetization axis of the iridium and platinum monolayers by 90°, which is attributed to the rearrangement of interfacial charges. In conclusion, our findings suggest an efficient approach to control the magnetization direction of monoatomic layers and provide valuable insights for the development of low-energy spintronics devices.
First-principles studies of the unconventional spin-phonon coupling mediated by spin-orbit coupling in pyrochlore Cd 2 Os 2 O 7
Here, we perform systematic first-principles calculations to investigate the spin-phonon coupling (SPC) mediated by spin-orbit coupling in pyrochlore Cd 2 Os 2 O 7 which has the peculiar all-in-all-out noncollinear magnetic ground state. A large SPC coefficient up to 34 cm –1 is found, showing the potential of using this material in thermal spin devices.We further split the SPC coefficients to contributions from symmetric exchange interaction, Dzyaloshinskii-Moriya interaction (DMI), and the single ion anisotropy. Unlike what was assumed in previous studies, the DMI contributions are rather important for most modes. These results provide insights for the understanding of the SPC in 5d transition metal oxides and useful guidance for the search of excellent spin caloritronic materials.
Hybrid density functional study of band gap engineering of SrTi O 3 photocatalyst via doping for water splitting
Perovskite SrTiO 3 (STO) is an attractive photocatalyst for solar water splitting but suffers from a limited photoresponse in the visible spectral range due to its wide band gap. By means of hybrid density functional theory calculations, we systematically study engineering its band gap via doping 4$\textit{d}$ and 5$\textit{d}$ transition-metals $\textit{M}$ (M = Zr, Nb, Mo, Tc, Ru, Rh, Pd, Hf, Ta, W, Re, Os, Ir, and Pt) and chalcogen elements $\textit{Y}$ ($\textit{Y}$ = S and Se).We find that transition-metal dopant M either has no effect on the STO band gap or introduces detrimental midgap states except for Pd and Pt that are able to reduce the STO band gap. In contrast, doping S and Se significantly reduces STO’s direct band gap, thus, leading to appreciable optical absorption transitions in the visible spectral range. In this work, our findings provide that Pd-, S-, and Se-doped STO are potential promising photocatalysts for water splitting under visible light irradiation thereby providing insightful theoretical guides for experiments to improve the photocatalytic activity of STO.
Tuning Dzyaloshinskii-Moriya interactions in magnetic bilayers with a ferroelectric substrate
Our group performed systematic first-principles calculations to explore the possibility of manipulating Dzyaloshinskii-Moriya interactions (DMIs) in heavy metal/ferromagnetic metal bilayers with ferroelectric (FE) polarization of a PbTiO 3 (PTO) substrate. Significantly, both the sign and magnitude of the DMI can be tailored by the FE polarization reversal in PTO. Moreover, the DMIs of Ir/Co/PTO and Ir/Fe/PTO can achieve large values (|d| > 10 meV) under the influence of an upward electric polarization of PTO. Our findings provided useful strategies for enhancing and tailoring DMIs in complex heterostructures and paved the way for the development of DMI-based devices with ultralow power consumption.
Alloying vanadium in Mn Bi 2 Te 4 for robust ferromagnetic coupling and quantum anomalous Hall effect
The intrinsic antiferromagnetic (AFM) interlayer coupling in the two-dimensional magnetic topological insulator MnBi 2 Te 4 places a restriction on realizing a stable quantum anomalous Hall effect (QAHE) [Y. Deng et al., Science 367, 895 (2020)]. Through density functional theory calculations, we demonstrate the possibility of tuning the AFM coupling to the ferromagnetic coupling in Mn Bi 2 Te 4 films by alloying about 50% V with Mn. As a result, the QAHE can be achieved without alternation with the even or odd septuple layers. This provides a practical strategy to get a robust QAHE in ultrathin Mn Bi 2 Te 4 films, rendering them attractive for technological innovations.
Unexpected dependence of the anomalous Hall angle on the Hall conductivity in amorphous transition metal thin films
The anomalous Hall effect (AHE), and magnetic and electronic transport properties were investigated in a series of amorphous transition metal thin films— Fe x S i –x , Fe x Ge 1-x , Co x Ge 1–x , Co x Si 1–x , and Fe 1–y Co y Si. The experimental results are compared with density functional theory calculations of the density of Berry curvature and intrinsic anomalous Hall conductivity. In all samples, the longitudinal conductivity (σ xx ), magnetization (M), and Hall resistivity (ρ xy ) increase with increasing transition metal concentration; due to the structural disorder σ xx is lower in all samples than a typical crystalline metal. In the systems with Fe as the transition metal (including Fe 1–y Co y Si), the magnetization and AHE are large and in some cases greater than the crystalline analog. In all samples, the AHE is dominated by the intrinsic mechanism, arising from a nonzero, locally derived Berry curvature. The anomalous Hall angle (AHA) (= σ xy /σ xx ) is as large as 5% at low temperature. These results are compared with the AHAs reported in a broad range of crystalline and amorphous materials. Previous work has shown that in a typical crystalline ferromagnet the Hall conductivity (σ xy ) and σ xx are correlated and are usually either both large or both small, resulting in an AHA that decreases with increasing σ xy . By contrast, the AHA increases linearly with increasing σ xy in the amorphous systems. This trend is attributed to a generally low σ xx , while σ xy varies and can be large. In the amorphous systems, σ xx and σ xy are not coupled, and there may thus exist the potential to further increase the AHA by increasing σ xy .
Extend NdJ relationship with the size, multiple exchanges and Dzyaloshinskii-Moriya interaction for Néel skyrmions in hexagonal magnetic interfaces
For the integration with other parts of spintronic devices, it is desired to minimize the size of skyrmions to a nanometer scale. To provide a theoretical guidance for this endeavour, we established an extended NdJ relationship between the skyrmion size and fundamental magnetic properties of two-dimensional hexagonal ferromagnetic lattices, including multiple exchanges between different neighbors (J 1 -J 4 ), Dzyaloshinskii-Moriya interactions (d 1 and d 2 ) and on-site magnetic anisotropy energy. We demonstrated the applicability of this approach through density functional theory and spin spiral calculations for several interface, e.g., Co/Gra, Rh/Gra, Co/Pt 3 and MgO/Co/Pt 3 , and showed that the size of Néel skyrmions can be effectively reduced by either enhancing d or more conveniently reducing J through cancelation of J i s.
Axion insulator state in ferromagnetically ordered CrI 3 /Bi 2 Se 3 /MnBi 2 Se 4 heterostructures
Ferromagnetic (FM) axion insulators may greatly simplify experimental explorations of the topological magnetoelectric effect, as the FM ordering can be stable in a broad range of magnetic field. Through density functional theory calculations and four-band model studies, we find that two-dimensional van der Waals FM CrI 3 and MnBi 2 Se 4 overlayers induce opposite-sign exchange fields in the topological surface states of Bi 2 Se 3 film when they are ferromagnetically ordered. As a consequence, the CrI 3 /Bi 2 Se 3 /MnBi 2 Se 4 heterostructure is a robust FM axion insulator, according to surface-resolved Berry curvature calculations. Our work opens up opportunities for the design of materials with the topological magnetoelectric effect.
Itinerant ferromagnetism and intrinsic anomalous Hall effect in amorphous iron-germanium
The amorphous iron-germanium system ( a - Fe x Ge 1 - x ) lacks long-range structural order and hence lacks a significant Brillouin zone. The magnetization of a - Fe x Ge 1 - x is well explained by the Stoner model for Fe concentrations x above the onset of magnetic order around x = 0.4 , indicating that the local order of the amorphous structure preserves the spin-split density of states of the Fe- 3 d states sufficiently to polarize the electronic structure despite k being a bad quantum number. Measurements reveal an enhanced anomalous Hall resistivity ρ x y AH relative to crystalline FeGe; this ρ x y AH is compared to density-functional theory calculations of the anomalous Hall conductivity to resolve its underlying mechanisms. The intrinsic mechanism, typically understood as the Berry curvature integrated over occupied k states but shown here to be equivalent to the density of curvature integrated over occupied energies in aperiodic materials, dominates the anomalous Hall conductivity of a - Fe x Ge 1 - x ( 0.38 ≤ x ≤ 0.61 ). The density of curvature is the sum of spin-orbit correlations of local orbital states and can hence be calculated with no reference to k space. This effect and the accompanying Stoner-like model for the intrinsic anomalous Hall conductivity establish a unified understanding of the underlying physics of the anomalous Hall effect in both crystalline and disordered systems.
First-principles studies of spin-phonon coupling in monolayer Cr 2 Ge 2 Te 6
Here, we perform systematic first-principles calculations to investigate the spin-phonon coupling (SPC) of Cr 2 Ge 2 Te 6 (CGT) monolayer (ML). It is found that the $E_g$ phonon mode at 211.8 cm –1 may have a SPC as large as 3.19 cm –1 , as it alters the direct exchange interaction across Cr-Cr pairs. The strength of SPC of the CGT ML can be decreased by an in-plane lattice stretch. These results provide useful insights for the understanding of SPC in two-dimensional magnetic semiconductors and may guide the design of spintronic and spin Seebeck materials and devices.