Search NASA⌕ Search

Engineering topics

Wu, Shao-Lin

Publications and source records attributed to Wu, Shao-Lin.

Suspended Membrane Evaporators Integrating Environmental and Solar Evaporation for Oily Wastewater Purification

Solar-driven evaporation is promising in oily wastewater treatment, in particular for emulsions, but conventional evaporators suffer from pore blocking by residual oil or contamination by volatile oil compounds in the condensed water. In the current research, we develop a suspended membrane evaporator integrating solar evaporation with oil-in-water emulsion separation. The heating and evaporating interface is separated from the rejecting interface to avoid oil escape and improve heat management. A temperature gradient forms on the membrane surface that can promote evaporation performance by combining both solar and environmental evaporation. Such an evaporator achieves a maximum evaporation rate of 1.645 kg/(m 2 ·h) as well as an apparent evaporation efficiency of 111.9%. Moreover, the superhydrophilic and superoleophobic membrane shows excellent oil repellence and emulsion rejection, which can achieve an oil removal efficiency above 98.8% in oil-in-water emulsion separation, and high evaporation rate recovery in cycling tests. Furthermore, a scaled-up membrane evaporator array produces ~8 kg/(m 2 ·d) of clean water from oily wastewater in outdoor experiments, further demonstrating the strong purification performance of this evaporator in oily wastewater treatment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

When SLIPS meets TIPS: An endogenous lubricant-infused surface by taking the diluent as the lubricant

Slippery lubricant-infused porous surfaces (SLIPSs) hold great promise in fields requiring adhesion resistance such as self-cleaning, anti-fouling, anti-icing, and anti-scaling. However, their road to practical application is still blocked by the complicated fabrication process and the restricted coating area. To address these challenges, we propose a new concept of endogenous SLIPS in which the porous structure grows from the solution coating of polypropylene/caprylyl methicone undergoing a thermally induced phase separation (TIPS) process. Caprylyl methicone serves as the diluent during TIPS as well as the lubricant in the SLIPS so that the coating can be fabricated in one step and unrestrictedly. Furthermore, the dissolution and phase separation mechanisms have been revealed by molecular dynamic simulation and in situ microscopic observation. Such SLIPSs exhibits impressive sliding property even for sticky and viscous liquids and exhibit extremely low ice adhesion in anti-icing tests.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Solar-driven evaporators for water treatment: challenges and opportunities

Solar-driven evaporation is an emerging process to acquire freshwater from saline water or wastewater, in which photothermal materials play a crucial role. Additionally, significant effort has been devoted to promoting energy conversion efficiency by material and device design. In the current review, we discuss the major factors affecting evaporator efficiency and long-term performance, including selection of photothermal materials, promotion of evaporation efficiency, and solutions to the problem of scaling. Both the material components and structure will affect the absorption and reflection of the incident light, and the evaporation efficiency can be enhanced by reducing heat loss, enlarging surface area, and recycling latent heat. Scaling can be addressed by tailoring surface properties and structure.

54 ENVIRONMENTAL SCIENCES↗

Recent progress in molecular engineering to tailor organic–inorganic interfaces in composite membranes

Organic-inorganic composite membranes are of great interest in modern water treatment processes because they offer potentially superior separation efficiency and advanced funtionality by integrating the properties of polymers and inorganics. The biggest challenge in the fabrication and applications of organic-inorganic composite membranes is the incompatibility of organic-inorganic interfaces. In this minireview, we summarize the most recent advances in molecular engineering to tailor the properties of interfaces in composite membranes. Three typical models (i.e. mixed matrix model, interface composite model, and dual-layer composite model) are presented to demonstrate how to regulate these interfaces via molecular engineering and how the interfacial properties ultimately affect the membrane performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗