Search NASA⌕ Search

Engineering topics

Wu, Zili

Publications and source records attributed to Wu, Zili.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Understanding_the_deactivation_mechanisms_of_ethanol_conversion_over_Cu-Y_Beta_catalyst

Direct conversion of bioethanol to C₃⁺olefins is a promising pathway for sustainable aviation fuel (SAF) production, but catalyst deactivation limits long-term operation. The stability and deactivation mechanisms of multifunctional Cu–Y/Beta zeolite catalysts were investigated for ethanol-to-olefins conversion over 300 h time-on-stream in the presence of H2. Catalytic testing reveals progressive losses in ethanol conversion and C₃⁺ olefin selectivity accompanied by increased acetaldehyde formation. The catalyst testing studies correlate with a suite of characterizations of fresh, spent, and regenerated catalysts to identify the deactivation factors. The loss of Y Lewis acid sites is the primary deactivation element. Reversible acid site deactivation is caused by coke deposition, which blocks Y-derived Lewis acid sites responsible for aldol condensation, MPV reduction, and alcohol dehydration. Minor irreversible deactivation is observed and possibly results from hydrothermal dehydroxylation of Y–silanol interactions, resulting in permanent loss of Lewis acidity without zeolite framework degradation or Y aggregation. Cu sites undergo limited agglomeration into small nanoparticles but contribute insignificantly to catalyst deactivation, under the investigated time frame. Oxidative regeneration removes coke and redistributes Cu sites, leading to full recovery of the initial catalytic performance though the Y Lewis acid sites are unable to fully recover. These findings establish Lewis acid site degradation as the primary deactivation mechanism impacting long-term catalyst stability

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Active Palladium Structures on Ceria Obtained by Tuning Pd–Pd Distance for Efficient Methane Combustion

Efficiently removing/converting methane via methane combustion imposes challenges on catalyst design: how to design local structures of a catalytic site so that it has both high intrinsic activity and atomic efficiency? By manipulating the atomic distance of isolated Pd atoms, herein we show that the intrinsic activity of Pd catalysts can be significantly improved for methane combustion via a stable Pd 2 structure on a ceria nanorod support. Guided by theory and confirmed by experiment, we find that the turnover frequency (TOF) of the Pd 2 structure with the Pd–Pd distance of 2.99 Å is higher than that of the Pd 2 structure with the Pd–Pd distance of 2.75 Å; at least 26 times that of ceria supported Pd single atoms and 4 times that of ceria supported PdO nanoparticles. The high intrinsic activity of the 2.99 Å Pd–Pd structure is attributed to the conductive local redox environment from the two O atoms bridging the two Pd 2+ ions, which facilitates both methane adsorption and activation as well as the production of water and carbon dioxide during the methane oxidation process. In conclusion, this work highlights the sensitivity of catalytic behavior on the local structure of active sites and the fine-tuning of the metal–metal distance enabled by a support local environment for guiding the design of efficient catalysts for reactions that highly rely on Pt-group metals.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Tuning metal-support interactions in nickel–zeolite catalysts leads to enhanced stability during dry reforming of methane

Ni-based catalysts are highly reactive for dry reforming of methane (DRM) but they are prone to rapid deactivation due to sintering and/or coking. In this study, we present a straightforward approach for anchoring dispersed Ni sites with strengthened metal-support interactions, which leads to Ni active sites embedded in dealuminated Beta zeolite with superior stability and rates for DRM. The process involves solid-state grinding of dealuminated Beta zeolites and nickel nitrate, followed by calcination under finely controlled gas flow conditions. By combining in situ X-ray absorption spectroscopy and ab initio simulations, it is elucidated that the efficient removal of byproducts during catalyst synthesis is conducted to strengthen Ni–Si interactions that suppress coking and sintering after 100 h of time-on-stream. Transient isotopic kinetic experiments shed light on the differences in intrinsic turnover frequency of Ni species and explain performance trends. This work constructs a fundamental understanding regarding the implication of facile synthesis protocols on metal-support interaction in zeolite-supported Ni sites, and it lays the needed foundations on how these interactions can be tuned for outstanding DRM performance.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Precision Structure Engineering of High-Entropy Oxides under Ambient Conditions

High-entropy oxides (HEOs) have unveiled a unique frontier in the realm of heterogeneous catalysis, taking advantage of the entropic effect and increased complexities to deliver ultrahigh stability and large tuning capability. However, current HEO synthesis mainly relies on high-temperature annealing approaches affording HEOs possessing no or low surface area, inferior active site exposure efficiency, and low controllability over the structure tuning. The grand challenge lies in producing high-quality HEO catalysts with high active site utilization efficiency, which relies on precision structure engineering, preferably under mild conditions. In this work, an in situ lattice engineering approach was developed to afford a supported HEO catalyst under ambient conditions. The HEO compositions (CuCoFeNiMnO x ) were uniformly integrated into the lattice of CeO 2 driven by cavitation-induced nucleation being generated via ultrasonication. The as-afforded catalysts were featured by high surface area, atomically dispersed HEO compositions, active redox properties, abundant oxygen vacancies (O V ), antiagglomeration, and high phase stability under harsh conditions. Compared with the ex situ introduction of HEO on the surface, the in situ method provides dual benefits to maintain the dispersity of HEO via entropic and lattice confinement effects. Engineering the complex HEO within the lattice of fluorite-structured CeO 2 also yields abundant defects (e.g., O V ) and active metal sites with strong reducing properties (e.g., Ce 3+ and Cu + ), which greatly improves the activity of the lattice oxygen and tunability of the adsorption behavior of the guest molecules, especially in the presence of impurities (e.g., water and propane). The catalytic performance of the supported HEO catalyst in oxidative procedures surpasses the pure dense phase HEO as well as the ex situ-generated catalysts. Further, the synthesis approach being developed in this work, together with the fundamental understanding in structure evolution and reaction mechanism, showcases a facile pathway under ambient conditions to generate stable catalysts capable of maintaining structural robustness in high-temperature conditions while delivering enhanced catalytic performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Low-temperature dechlorination of polyvinyl chloride (PVC) for production of H 2 and carbon materials using liquid metal catalysts

Polyvinyl chloride (PVC) is ubiquitous in everyday life; however, it is not recycled because it degrades uncontrollably into toxic products above 250°C. Therefore, it is of interest to controllably dechlorinate PVC at mild temperatures to generate narrowly distributed carbon materials. We present a catalytic route to dechlorinate PVC (~90% reduction of Cl content) at mild temperature (200°C) to produce gas H 2 (with negligible coproduction of corrosive gas HCl) and carbon materials using Ga as a liquid metal (LM) catalyst. A LM was used to promote intimate contact between PVC and the catalytic sites. During dechlorination of PVC, Cl is sequestrated in the carbonaceous solid product. Later, chlorine is easily removed with an acetone wash at room temperature. The Ga LM catalyst is reusable, outperforms a traditional supported metal catalyst, and successfully converts (untreated) discarded PVC pipe.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Synthesis of Perdeuterated Alkyl Amines/Amides with Pt/C as Catalyst under Mild Conditions

A convenient method for the synthesis of perdeuterated alkyl amides/amines is disclosed. Perdeuterated acetyl amides can be achieved by a hydrogen–deuterium (H/D) exchange protocol with Pt/C as a catalyst and D 2 O as a deuterium source under mild conditions. Further, after removal or reduction of the acetyl group, this protocol can provide perdeuterated primary, secondary, and tertiary amines, which are difficult to achieve via other methods.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Tailoring olefin distribution via tuning rare earth metals in bifunctional Cu-RE/beta-zeolite catalysts for ethanol upgrading

Bioethanol to middle distillate technologies have offered a unique solution to produce renewable aviation fuel for decarbonizing the hard-to-electrify sectors. Here, we have developed the series of bimetallic Cu- and rare earth-containing (RE) Beta zeolite catalysts that yield high C 3+ alkene selectivity from ethanol upgrading (>80% selectivity at ~100% conversion, 623 K). The formation rates of butene isomers to C 5+ alkenes are linearly correlated with the strength of Lewis acidic RE identity, which follows the sequence of Yb 12 /Beta >Y 7 /Beta > Gd 12 /Beta > Ce 10 /Beta > La 12 /Beta. Rate measurements indicate that the RE selection plays the vital role in altering the rate of the key competitive reactions within the ethanol-to-alkenes reaction network, namely C 4 alcohol dehydration and C-C chain growth, which dictate alkene product distributions. Finally, these findings indicate a feasible and promising method for tailoring alkene product distributions from ethanol upgrading, which is of notable significance to the generation of renewable middle distillates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Significant Roles of Surface Hydrides in Enhancing the Performance of Cu/BaTiO 2.8 H 0.2 Catalyst for CO 2 Hydrogenation to Methanol

A BaTiO 3 lattice is shown in the background of the cover picture, with the stack of orange balls symbolizing Cu nanoparticles. Pipes delivering the reactants and products have the shapes of H — and e — indicating they are involved in the catalytic hydrogenation of CO 2 . Lattice O is replaced with hydrides for the enhanced performance in CO 2 hydrogenation to methanol, as demonstrated by Zili Wu et al. in their Research Article (e202313389).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Significant Roles of Surface Hydrides in Enhancing the Performance of Cu/BaTiO 2.8 H 0.2 Catalyst for CO 2 Hydrogenation to Methanol

Abstract Tuning the anionic site of catalyst supports can impact reaction pathways by creating active sites on the support or influencing metal‐support interactions when using supported metal nanoparticles. This study focuses on CO 2 hydrogenation over supported Cu nanoparticles, revealing a 3‐fold increase in methanol yield when replacing oxygen anions with hydrides in the perovskite support (Cu/BaTiO 2.8 H 0.2 yields ~146 mg/h/gCu vs. Cu/BaTiO 3 yields ~50 mg/h/gCu). The contrast suggests that significant roles are played by the support hydrides in the reaction. Temperature programmed reaction and isotopic labelling studies indicate that BaTiO 2.8 H 0.2 surface hydride species follow a Mars van Krevelen mechanism in CO 2 hydrogenation, promoting methanol production. High‐pressure steady‐state isotopic transient kinetic analysis (SSITKA) studies suggest that Cu/BaTiO 2.8 H 0.2 possesses both a higher density and more active and selective sites for methanol production compared to Cu/BaTiO 3 . An operando high‐pressure diffuse reflectance infrared spectroscopy (DRIFTS)‐SSITKA study shows that formate species are the major surface intermediates over both catalysts, and the subsequent hydrogenation steps of formate are likely rate‐limiting. However, the catalytic reactivity of Cu/BaTiO 2.8 H 0.2 towards the formate species is much higher than Cu/BaTiO 3 , likely due to the altered electronic structure of interface Cu sites by the hydrides in the support as validated by density functional theory (DFT) calculations.

He, Yang↗
DOE OSTI2023

Recent Developments in Revealing the Impact of Complex Metal Oxide Reconstruction on Catalysis

Surface reconstruction of complex metal oxides refers to the alterations of the topmost catalyst surface, relative to the bulk structure, following exposure to pretreatment or reaction conditions during heterogeneous catalysis. (1) This structural and electronic transformation may involve (1) changes of the exposed crystallographic facets, (2) changes in chemical composition, such as the enrichment of specific elements, and, (3) morphological variations, including surface roughness and defects (Scheme 1). Beyond relaxation, surface reconstruction here also encompasses disruptions to the periodicity of the sublayers and changes to its stoichiometry. This change significantly influences the chemical properties of the catalyst surface, such as redox sites, (2) acid/base pairs, hydroxyl groups, (3) and surface defects. Surface reconstruction occurs due to the thermodynamic drive to lower the surface energy of the catalyst under the surrounding environment (e.g., temperature, chemical potential of species present). In addition to the treatment or reaction conditions, the extent of reconstruction also depends on the elements in the metal oxide structure. For instance, annealing ABO 3 perovskites (SrTiO 3 , BaTiO 3 , and BaZrO 3 ) at high temperatures (500 °C) in O 2 has a very different impact on the A/B ratio at the surface (ranging from 0.9 to 2.5), depending on the identity of A and B. (4) Metal oxide surface reconstruction under an electric field and exposure to acidic and alkaline media has recently gained increased attention in electrocatalysis, such as in the oxygen evolution reaction (OER); (5,6) however, in this Viewpoint we focus on the impact of surface reconstruction on thermal catalysis, a critical enduring research theme with ongoing challenges. Here, we start showcasing approaches to characterize surface reconstruction at the topmost surface layer, such as low-energy ion scattering (LEIS), discussing advantages and limitations. Next, we connect characterization of surface reconstruction to site-specific kinetic analysis, enabled via steady-state isotopic transient kinetic analysis (SSITKA), and we express our viewpoint on building structure–performance relationships by deeply understanding reconstructed surfaces. Later, we comment on the potential of tuning surface reconstruction to enhance catalytic performance. Finally, we explore the interplay between surface reconstruction and the “intelligent behavior”.

alcohol conversion↗
DOE OSTI2023

Acetylene Semi-Hydrogenation on a Perovskite Oxyhydride Surface: Insights from First Principles and Microkinetic Modeling

Although perovskite oxyhydrides (POHs) have shown promise as a support for selective hydrogenation, it is unknown if they themselves can catalyze alkyne semi-hydrogenation. Here, we use first-principles density functional theory, coupled with microkinetic modeling, to investigate acetylene semi-hydrogenation on a prototypical POH, cubic BaTiO 2.5 H 0.5 (BTOH). Two different mechanisms are examined on a representative surface of BTOH under the reaction conditions: both are based on the Horiuti–Polanyi mechanism, but the way of H 2 dissociation is different. In mechanism 1, a lattice hydride H atom and then a surface adsorbed H atom sequentially hydrogenate the adsorbed acetylene. In mechanism 2, two lattice hydride H atoms from the BTOH sequentially hydrogenate the adsorbed acetylene. In both mechanisms, the H atoms are replenished from gas phase H 2 dissociation. Using density functional theory (DFT), we have calculated pathways for these two mechanisms in hydrogenation of acetylene to ethylene, as well as further to ethane. Microkinetic modeling based on the DFT energetics indicates that at 523 K, hydrogenation to ethylene and ethane via mechanism 1 occurs at a rate up to two orders of magnitude faster than via mechanism 2. A selectivity analysis for the temperature range of 373–673 K shows that the product observed is essentially only ethylene within the more active mechanism 1. This is because at the steady state, there is a significant amount of surface anion vacancies that facilitate heterolytic H 2 dissociation and help stabilize a vinyl intermediate. In conclusion, the present findings suggest that POHs are capable of selective hydrogenation, thanks to their rich hydrogen surface-redox chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Construction of Boron‐ and Nitrogen‐Enriched Nanoporous π‐Conjugated Networks Towards Enhanced Hydrogen Activation

Abstract Boron‐enriched scaffolds have demonstrated unique features and promising performance in the field of catalysis towards the activation of small gas molecules. However, there is still a lack of facile approaches capable of achieving high B doping and abundant porous channels in the targeted catalysts. Herein, construction of boron‐ and nitrogen‐enriched nanoporous π‐conjugated networks (BN‐NCNs) was achieved via a facile ionothermal polymerization procedure with hexaazatriphenylenehexacarbonitrile [HAT(CN) 6 ] sodium borohydride as the starting materials. The as‐produced BN‐NCN scaffolds were featured by high heteroatoms doping (B up to 23 wt. % and N: up to 17 wt. %) and permanent porosity (surface area up to 759 m 2 g −1 mainly contributed by micropores). With the unsaturated bonded B species acting as the active Lewis acid sites and defected N species acting as the active Lewis base sites, those BN‐NCNs delivered attractive catalytic performance towards H 2 activation/dissociation in both gaseous and liquid phase, acting as efficient metal‐free heterogeneous frustrated Lewis pairs (FLPs) catalysts in hydrogenation procedures.

Li, Meijia↗
DOE OSTI2023

Construction of Boron- and Nitrogen-Enriched Nanoporous π-Conjugated Networks Towards Enhanced Hydrogen Activation

Boron-enriched scaffolds have demonstrated unique features and promising performance in the field of catalysis towards the activation of small gas molecules. However, there is still a lack of facile approaches capable of achieving high B doping and abundant porous channels in the targeted catalysts. Here, in this paper, construction of boron- and nitrogen-enriched nanoporous π-conjugated networks (BN-NCNs) was achieved via a facile ionothermal polymerization procedure with hexaazatriphenylenehexacarbonitrile [HAT(CN) 6 ] sodium borohydride as the starting materials. The as-produced BN-NCN scaffolds were featured by high heteroatoms doping (B up to 23 wt. % and N: up to 17 wt. %) and permanent porosity (surface area up to 759 m 2 g -1 mainly contributed by micropores). With the unsaturated bonded B species acting as the active Lewis acid sites and defected N species acting as the active Lewis base sites, those BN-NCNs delivered attractive catalytic performance towards H 2 activation/dissociation in both gaseous and liquid phase, acting as efficient metal-free heterogeneous frustrated Lewis pairs (FLPs) catalysts in hydrogenation procedures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Raman Spectroscopy

Raman spectroscopy is one of the mostly utilized optical spectroscopic tools for revealing both the catalyst structure and surface chemistry in heterogeneous catalysis. It has recently seen increasing role in catalysis research, thanks to the development of new Raman instrumentations, reactors, and combination with other techniques, leading to in situ and operando studies with significant temporal and spatial resolutions. This chapter aimed to provide a general overview of the applications of Raman spectroscopy in heterogeneous catalysis. It starts with an introduction to the fundamentals of Raman scattering including theory and pros and cons for catalysis research; followed by a description of the typical setup of a Raman system and recent advances in Raman instrumentations; then a chronology of the applications of Raman spectroscopy for ex situ, in situ, and operando studies of catalysis; elucidations of the advances in improving the temporal and spatial resolution of Raman spectroscopy of catalysis; Raman application case studies related to catalyst synthesis, treatments, and function under reaction conditions; illustrations of the power of multimodal approach including Raman spectroscopy in catalysis research; and ended with a brief summary and a future outlook.

Braatz, Jisue↗