Search NASA⌕ Search

Engineering topics

Xia, Younan

Publications and source records attributed to Xia, Younan.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Facile Synthesis of Rhodium‐Based Nanocrystals in a Metastable Phase and Evaluation of Their Thermal and Catalytic Properties

Abstract Controlling the polymorphism of metal nanocrystals is a promising strategy for enhancing properties and discovering new phenomena. However, previous studies on Rh nanocrystals have focused on their thermodynamically stable face‐centered‐cubic (fcc) phase. Herein, a facile synthesis of Rh‐based nanocrystals featuring the metastable hexagonal close‐packed (hcp) phase is reported by using Ru seeds in their native hcp phase to template the deposition of Rh atoms. The success of such phase‐controlled synthesis relies on the templating effect promoted by the small lattice mismatch between Ru and Rh and the slow dropwise titration of the precursor at an elevated temperature, ensuring the layer‐by‐layer growth mode and thus the formation of a conformal hcp‐Rh shell. Faster injection rate of Rh(III) precursor leads to the formation of a rough Rh shell in the conventional fcc phase due to accelerated reaction kinetics. Considering both thermodynamic and kinetic aspects of this system, the hcp‐Rh phase is favored when the low surface energy from smooth overlayers balances the high bulk energy of the metastable phase, achieved through tight control of reaction rates and deposition patterns. These Ru hcp @Rh hcp core–shell nanocrystals demonstrate thermal stability up to 400 °C, while exhibiting higher catalytic activity toward ethanol oxidation reaction compared to Ru hcp @Rh fcc counterparts.

Nguyen, Quynh N.↗
DOE OSTI2024

Carbon Nanospheres Loaded with Ir Single Atoms: Enhancing the Activity toward Formic Acid Oxidation by Increasing the Porosity

Theoretically, single-atom catalysts (SACs) offer 100 % atom utilization, making them strong candidates to replace expensive nanoparticles for catalysis. However, the structural supports used to anchor the SACs dramatically reduce the utilization efficiency of atoms ( i. e ., the percent of atoms actually accessible by reactants) by either encapsulating the SACs completely or creating severe diffusion limitation. Either of which leads to an overall low atom utilization and thus poor electrocatalytic activity similar to that of nanoparticles. In addressing this issue, we systematically investigated how the porous structure of carbon nanospheres affects the activity of Ir-SACs toward formic acid oxidation (FAO). Specifically, we utilized a kinetically-controlled growth strategy to produce uniform carbon nanospheres featuring yolk-shell, mesoporous, and hollow structures with Ir-SACs loaded throughout the structure. At a high specific surface area of 441 m 2 g -1 and exposed metal content of 1.82 wt %, the Ir-SACs based on mesoporous carbon nanospheres showed a remarkable FAO peak current density of 30.6 mA cm -2 , which was 283 and 46 times greater when benchmarked against the catalysts based on solid carbon nanospheres and 20 wt % Ir/C, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Extraordinary Thermal Stability and Sinter Resistance of Sub-2 nm Platinum Nanoparticles Anchored to a Carbon Support by Selenium

Nanoparticle sintering has long been a major challenge in developing catalytic systems for use at elevated temperatures. Here we report an in situ electron microscopy study of the extraordinary sinter resistance of a catalytic system comprised of sub-2 nm Pt nanoparticles on a Se-decorated carbon support. When heated to 700 °C, the average size of the Pt nanoparticles only increased from 1.6 to 2.2 nm, while the crystal structure, together with the {111} and {100} facets, of the Pt nanoparticles was well retained. Our electron microscopy analyses suggested that the superior resistance against sintering originated from the Pt–Se interaction. Confirmed by energy-dispersive X-ray elemental mapping and electron energy loss spectra, the Se atoms surrounding the Pt nanoparticles could survive the heating. This work not only offers an understanding of the physics behind the thermal behavior of this catalytic material but also sheds light on the future development of sinter-resistant catalytic systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Thermal Stability of Au Rhombic Dodecahedral Nanocrystals Can Be Greatly Enhanced by Coating Their Surface with an Ultrathin Shell of Pt

Rhombic dodecahedral nanocrystals have been considered particularly difficult to synthesize because they are enclosed by {110}, a low-index facet with the greatest surface energy. Recently, we demonstrated the use of seed-mediated growth for the facile and robust synthesis of Au rhombic dodecahedral nanocrystals (AuRD). While the unique shape and surface structure of AuRD are desirable for potential applications in plasmonics and catalysis, respectively, their high surface energy makes them highly susceptible to thermal degradation. Here we demonstrate that it is feasible to greatly improve the thermal stability with some sacrifice to the plasmonic properties of the original AuRD by coating their surface with an ultrathin shell made of Pt. Our in situ electron microscopy analysis indicates that the ultrathin Pt coating can increase the thermal stability from 60 up to 450 °C, a trend that is also supported by the results from a computational study.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Fast and Non‐equilibrium Uptake of Hydrogen by Pd Icosahedral Nanocrystals

Abstract We report for the first time that Pd nanocrystals can absorb H via a “single‐phase pathway” when particles with a proper combination of shape and size are used. Specifically, when Pd icosahedral nanocrystals of 7‐ and 12‐nm in size are exposed to H atoms, the H‐saturated twin boundaries can divide each particle into 20 smaller single‐crystal units in which the formation of phase boundaries is no longer favored. As such, absorption of H atoms is dominated by the single‐phase pathway and one can readily obtain PdH x with anyx in the range of 0–0.7. When switched to Pd octahedral nanocrystals, the single‐phase pathway is only observed for particles of 7 nm in size. We also establish that the H‐absorption kinetics will be accelerated if there is a tensile strain in the nanocrystals due to the increase in lattice spacing. Besides the unique H‐absorption behaviors, the PdH x ( x =0–0.7) icosahedral nanocrystals show remarkable thermal and catalytic stability toward the formic acid oxidation due tothe decrease in chemical potential for H atoms in a Pd lattice under tensile strain.

Zhou, Siyu↗
DOE OSTI2023

Twin Proliferation and Prolongation under Kinetic Control: Pd–Au Janus Icosahedra versus Pd@Au Core–Shell Starfishes

Heterogeneous bimetallic nanocrystals featuring explicit spatial configurations and abundant twin defects can simultaneously enable geometric and ligand effects to enhance catalytic and photonic applications. Herein, we report two growth patterns of Au atoms on penta-twinned Pd decahedra, involving twin proliferation to generate asymmetric Pd–Au Janus icosahedra and twin elongation to produce anisotropic Pd@Au core–shell starfishes, respectively. Mechanistic analysis indicates that the injection rate determines the lower-limit number (n low ) of Au(III) ions in the steady state and thus controls the growth pattern. When n low ≤ 5.5, the kinetic rate is slow enough to initiate asymmetrical one-side growth but fast enough to outpace surface diffusion; Au tetrahedral subunits are successively proliferated along the axial $\langle$110$\rangle$ direction of Pd decahedra to form Pd–Au Janus icosahedra. Composed of five Pd and 15 Au tetrahedral subunits, such a heterogeneous icosahedron supports high (2.2 GPa) tensile strain and high strain difference up to +21.9%. In contrast, when n low > 5.5, the fast reduction kinetics promotes symmetric growth with inadequate surface diffusion. As such, Au atoms are laterally deposited along five high-indexed $\langle$211$\rangle$ ridges of Pd decahedra to generate concave Pd@Au core–shell starfishes with tunable sizes (28–40 nm), twin elongation ratios (33.82–162.08%), and lattice expansion ratios (8.82–20.10%).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

The role of coverage effects on the structure–sensitivity of formic acid electrooxidation on Pd surfaces

Direct formic acid (FA) fuel cells (DFAFCs) with Pd anode catalysts are promising for small portable applications. During the electrooxidation of formic acid (FAO), CO accumulates on the Pd electrocatalyst, thereby decreasing its performance. In this work, we use density functional theory (DFT; RPBE) to elucidate the significance of coverage effects on the structure–sensitivity of FAO over four low–index Pd surfaces: Pd(1 1 1), Pd(1 0 0), Pd(1 1 0), and Pd(2 1 1). We construct coverage–dependent Gibbs free energy diagrams and in agreement with experiment, predict that Pd(1 0 0) and Pd(2 1 1) are the most active surfaces. Additionally, we find that the presence of CO spectator species can alter the preferred electrooxidation pathway under different applied potentials. Furthermore, such pathway transitions appear to be critical for rationalizing experimental trends regarding electrocatalytic activity and are only captured when coverage effects are accounted for. Insights derived from this work may facilitate the design of improved FAO electrocatalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Continuous Production of Carbon-Supported and Surfactant-Free Pt-M (M=Fe, Co, Ni, and Cu) Nanocrystals for Catalyzing Oxygen Reduction

Scalable production of carbon-supported Pt-M (M=Co, Ni, and Fe) alloy nanocrystals is of great importance for their practical application as catalysts towards the oxygen reduction reaction (ORR), a process key to the operation of proton-exchange membrane fuel cells. Here we report the use of a fluidic device for the in situ nucleation and growth of Pt-M nanocrystals on a commercial carbon support in a continuous and scalable fashion. The use of dimethylformamide not only enables well dispersion of the carbon powders for the creation of a homogeneous reaction mixture but also helps reduce metal precursors for the heterogeneous nucleation and growth of nanocrystals on the carbon surface. The size, shape, and composition of the nanocrystals can all be tuned by changing the metal precursors added into the reaction mixture, resulting in Pt-M nanocrystals uniformly distributed across the surface of the carbon support. Among the nanocrystals, the carbon-supported Pt-Co nanocrystals show the highest ORR specific and mass activities at 0.9 V, demonstrating 11.4- and 8.8-fold enhancements over the state-of-the-art commercial Pt/C catalyst.

Electrochemistry↗
DOE OSTI2022

Shape-Controlled Synthesis of Copper Nanocrystals for Plasmonic, Biomedical, and Electrocatalytic Applications

As a metal that can occur in nature in the elemental form, copper (Cu) has been used by humans since ca. 8000 BC. With most properties matching those of Ag and Au, Cu has played a more significant role in commercial applications owing to its much higher (the 25th among all elements) abundance in Earth’s crust and thus more affordable price. In addition to its common use as a conductor of heat and electricity, it is a constituent of various metal alloys for hardware, coins, strain gauges, and thermocouples. Bulk Cu is also widely utilized as a building material. When downsized to the nanoscale, Cu and Cu-based structures have found widespread use in applications ranging from electronics to optoelectronics, plasmonics, catalysis, sensing, and biomedicine. Besides Ag and Au, for example, Cu is another metal known for its localized surface plasmon resonance (LSPR) in the visible and near-infrared regions when prepared as nanocrystals. As a potential replacement for indium–tin oxide (ITO) films, polymer coatings containing Cu nanowires are strong candidates for the fabrication of transparent and flexible electrodes key to touchscreen display and related applications. The commercial catalysts for water–gas shift and gas detoxification reactions are also based on Cu nanoparticles. Most recently, Cu nanocrystals have attracted considerable interest for their superior selectivity toward hydrocarbons and multicarbon species during the electrochemical reduction of CO 2 . The success of all these applications critically depends on our ability to control the shape and surface structure of the nanocrystals. Relative to Ag and Au, it is more challenging to generate Cu-based nanocrystals using colloidal methods due to its lower reduction potential and greater vulnerability to oxidation. Here, in this account, we discuss recent progress in the colloidal synthesis of Cu nanocrystals with controlled shapes for plasmonic, biomedical, and catalytic applications. With glucose serving as a reducing agent, Cu nanocrystals bearing a twinned or single-crystal structure can be synthesized using an aqueous system with the assistance of hexadecylamine (HDA). In this synthetic protocol, HDA not only passivates the surface to protect the nanocrystals from oxidation but also manipulates the reduction kinetics of Cu(II) precursor through coordination and an increase of solution pH. Typical products include nanocubes and penta-twinned nanowires whose surfaces are dominated by {100} facets. When seeds produced either in situ or ex situ are introduced, Cu-based nanocrystals featuring a singly twinned, core–shell, or Janus structure can be readily synthesized. Aside from segmented structures, Cu-based alloys with various noble metals can be synthesized through coreduction or a galvanic replacement reaction with preformed Cu nanocrystals. By controlling the size and/or shape of Cu nanocrystals, their LSPR peaks can be tuned into the near-infrared region, making them promising candidates for optical imaging contrast enhancement and photothermal treatment. The inclusion of the 64 Cu isotope makes them immediately useful in positron emission tomography and thus image-guided therapy. The surface structure, elemental distribution, and valence state of Cu-based nanocrystals can all be tailored to augment their electrocatalytic performance. It is hoped that this Account will inspire more studies into the development of rational methods capable of producing Cu-based nanocrystals with diverse and well-controlled shapes, internal structures, and compositions for a broader range of applications.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Carbon supports for oxygen reduction catalysts

The invention provides a method of making a electrocatalyst from waste tires. The method comprises the steps of providing rubber pieces; optionally contacting the rubber pieces with a sulfonation bath to produce sulfonated rubber; pyrolyzing the rubber to produce tire-derived carbon composite comprising carbon black, wherein the pyrolyzing comprises heating to at least 200° C.-2400° C.; activating the tire-derived carbon composite by contacting the tire-derived carbon composite with an alkali anion compound to provide activated tire-derived carbon supports; and loading the activated carbon-based supports with platinum cubes. In another embodiment, the tire-derived carbon composite is activated by annealing in a carbon dioxide atmosphere.

Naskar, Amit K.↗
DOE OSTI2022

Synthesis and Characterization of Pt‐Ag Icosahedral Nanocages with Enhanced Catalytic Activity toward Oxygen Reduction

Abstract There is an urgent need to develop cost‐effective electrocatalysts based on Pt for a broad spectrum of applications, including those vital to the operation of fuel cells. Hollowing out the interior of Pt nanocrystals offers a simple and viable strategy for maximizing the utilization efficiency of this precious metal while enhancing the electrocatalytic performance. Herein, we report the synthesis and electrocatalytic evaluation of Pt−Ag icosahedral nanocages with an average wall thickness of 1.6 nm. The Pt atoms are coated on the surface of Ag icosahedral seeds, leading to the formation of Ag@Pt nL core‐shell icosahedral nanocrystals with tunable shell thicknesses. The core‐shell nanocrystals are then converted to icosahedral nanocages by selectively etching away the Ag in the core. The as‐obtained nanocages with a composition of Pt 4.5 Ag exhibit an almost 3‐fold enhancement in specific activity toward oxygen reduction relative to the commercial Pt/C in acid media.

Wang, Wenxia↗
DOE OSTI2022

Decomposition Kinetics of H 2 O 2 on Pd Nanocrystals with Different Shapes and Surface Strains

Direct synthesis of hydrogen peroxide (H 2 O 2 ) from H 2 and O 2 on a Pd-based catalyst has emerged as a promising route to replace the energy-consuming, highly inefficient anthraquinone process. However, Pd is also a good catalyst for the decomposition of H 2 O 2 , thereby compromising the selectivity toward the desired product. The coupling between the formation and decomposition reactions makes it difficult to single out the most important parameter that controls the selectivity toward direct synthesis of H 2 O 2 . Herein, support-free monometallic Pd nanocrystals with different shapes and surface strains are used to investigate their impacts on the decomposition kinetics of H 2 O 2 . The kinetics are analyzed by tracking the concentration of the remaining H 2 O 2 using infrared spectroscopy. The data indicates that both surface structure and strain affect the decomposition kinetics of H 2 O 2 , but their impacts are inferior to that caused by Br – , a surface capping agent for the Pd{100} facets. The experimental results are consistent with the trend obtained through density functional theory calculations. Furthermore, this work helps shed light on the development of Pd-based catalysts for the direct synthesis of H 2 O 2 by offering strategies to mitigate the decomposition of the desired product.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Solution-Phase Synthesis of PdH 0.706 Nanocubes with Enhanced Stability and Activity toward Formic Acid Oxidation

We report palladium is one of the few metals capable of forming hydrides, with the catalytic properties being dependent on the elemental composition and spatial distribution of H atoms in the lattice. Herein, we report a facile method for the complete transformation of Pd nanocubes into a stable phase made of PdH 0.706 by treating them with aqueous hydrazine at a concentration as low as 9.2 mM. Using formic acid oxidation (FAO) as a model reaction, we systematically investigated the structure–catalytic property relationship of the resultant nanocubes with different degrees of hydride formation. The current density at 0.4 V was enhanced by four times when the nanocubes were completely converted from Pd to PdH 0.706 . On the basis of a set of slab models with PdH(100) overlayers on Pd(100), we conducted density functional theory calculations to demonstrate that the degree of hybrid formation could influence both the activity and selectivity toward FAO by modulating the relative stability of formate (HCOO) and carboxyl (COOH) intermediates. Furthermore, this work provides a viable strategy for augmenting the performance of Pd-based catalysts toward various reactions without altering the loading of this scarce metal.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Facile Synthesis of Palladium-Based Nanocrystals with Different Crystal Phases and a Comparison of Their Catalytic Properties

A relatively unexplored aspect of noble-metal nanomaterials is polymorphism, or their ability to crystallize in different crystal phases. Here, in this work, a method is reported for the facile synthesis of Ru@Pd core–shell nanocrystals featuring polymorphism, with the core made of hexagonally close-packed (hcp)-Ru while the Pd shell takes either an hcp or face-centered cubic (fcc) phase. The polymorphism shows a dependence on the shell thickness, with shells thinner than ≈1.4 nm taking the hcp phase whereas the thicker ones revert to fcc. The injection rate provides an experimental knob for controlling the phase, with one-shot and drop-wise injection of the Pd precursor corresponding to fcc-Pd and hcp-Pd shells, respectively. When these nanocrystals are tested as catalysts toward formic acid oxidation, the Ru@Pd hcp nanocrystals outperform Ru@Pd fcc in terms of both specific activity and peak potential. Density functional theory calculations are also performed to elucidate the origin of this performance enhancement.

36 MATERIALS SCIENCE↗