Search NASA⌕ Search

Engineering topics

Xiao, H Y

Publications and source records attributed to Xiao, H Y.

Formation and properties of defects and small vacancy clusters in SiC: Ab initio calculations

Large-scale ab initio simulation methods have been employed to investigate the configurations and properties of defects in SiC. Atomic structures, formation energies and binding energies of small vacancy clusters have also been studied as a function of cluster size, and their relative stabilities are determined. The calculated formation energies of point defects are in good agreement with previously theoretical calculations. The results show that the most stable configuration of a di-vacancy cluster consists of two C vacancies located at second nearest neighbor sites, while a di-vacancy with two Si vacancies is not stable and may dissociate at room temperature. In general, the formation energies of small vacancy clusters increase with size, but the formation energies for clusters with a Si vacancy and n C vacancies (VSi-nVC) are much smaller than those with a C vacancy and n Si vacancies (VC-nVSi). These results demonstrate that the VSi-nVC clusters are more stable than the VC-nVSi clusters in SiC, and provide possible nucleation sites for larger vacancy clusters or voids to grow. For these small vacancy clusters, the binding energy decreases with increasing cluster size, and ranges from 2.5 to 4.6 eV. These results indicate that the small vacancy clusters in SiC are stable at temperatures up to 1900 K, which is consistent with experimental observations.

36 MATERIALS SCIENCE↗

Defect-Enhanced Charge Transfer by Ion-Solid Interactions in SiC using Large-Scale Ab Initio Molecular Dynamics Simulations

Large-scale ab initio molecular dynamics simulations of ion-solid interactions in SiC reveal that significant charge-transfer occurs between atoms and defects can enhance charge transfer to surrounding atoms. The results demonstrate that charge transfer to and from recoiling atoms can alter the energy barriers and dynamics for stable defect formation. The present simulations illustrate in detail the dynamic processes for charged defect formation. The averaged values of displacement threshold energies along four main crystallographic directions are smaller than those determined by empirical potentials due to charge transfer effects on recoil atoms.

36 MATERIALS SCIENCE↗

Threshold displacement energy in GaN; Ab initio molecular dynamics study

Large-scale ab initio molecular dynamics method has been used to determine the threshold displacement energies, Ed, along five specific directions and to determine the defect configurations created during low energy events. The Ed shows a significant dependence on direction. The minimum Ed is determined to be 39 eV along the <-1010> direction for a gallium atom and 17.0 eV along the <-1010> direction for a nitrogen atom, which are in reasonable agreement with the experimental measurements. The average Ed values determined are 73.2 and 32.4 eV for gallium and nitrogen atoms, respectively. The N defects created at low energy events along different crystallographic directions have a similar configuration (a N-N dumbbell configuration), but various configurations for Ga defects are formed in GaN.

36 MATERIALS SCIENCE↗

Electronic and magnetic properties of graphene absorbed with S atom: A first-principles study

Stable configuration, electronic structures, and magnetic behaviors for S adsorption on graphene have been investigated by first-principles calculations. It is found that the adsorption site of S on graphene is coverage dependent. As the increase of coverage from 0 to 0.5 ML, the preferred site is changed from bridge to hollow site. For the adsorption of S at bridge site, no magnetic moment is detected, and the adsorption is characterized by strong hybridization between the S 2s state and graphene σ states. For the adsorption of S at hollow site, a magnetic moment of 1.98 μB was induced. In this case, the hybridization occurs between S 2p states and graphene π states. Furthermore, from the investigation of the surface potential energy curve, we find that graphene is a suitable candidate for the S storage.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

First-principles calculation of structural and energetic properties for A2Ti2O7 (A =Lu, Er, Y, Gd, Sm, Nd, La)

A first-principles method has been employed to investigate the structural and energetic properties for A2Ti2O7 (A=Lu, Er, Y, Gd, Sm, Nd, La), including the formation energies of the cation antisite-pair, the anion Frenkel pair that defines anion-disorder, and the coupled cation antisite-pair/anion-Frenkel. It is proposed that the interaction may have more significant influence on the radiation resistance behavior of titanate pyrochlores, although the interactions are relatively much stronger than the interactions. It is found that the defect formation energies are not simple functions of the A-site cation radii. The formation energy of the cation antisite-pair increases continuously as the A-site cation varies from Lu to Gd, and then decreases continuously with the variation of the A-site cation from Gd to La, in excellent agreement with the radiation-resistance trend of the titanate pyrochlores. The band gaps in these pyrochlores were also measured, and the band gap widths changed continuously with cation radius.

36 MATERIALS SCIENCE↗

Adsorption of hydrogen on boron-doped graphene: A first-principles prediction

The doping effects of boron on the atomic adsorption of hydrogen on graphene have been investigated using density functional theory calculations. The hydrogen adsorption energies and electronic structures have been considered for pristine and B-doped graphene with the adsorption of hydrogen on top of carbon or boron atom. It is found that the B-doping forms an electron-deficient structure, and decreases the hydrogen adsorption energy dramatically. For the adsorption of hydrogen on top of other sites, similar results also have been found. These results indicate that the hydrogen storage capacity is improved by the doping of B atom.

08 HYDROGEN↗

Hydrogen Adsorption, Dissociation and Diffusion on the α-U(001) Surface

First-principles pseudopotential plane wave calculations based on density functional theory and the generalized gradient approximation have been used to study the adsorption, dissociation, and diffusion of hydrogen on the α-U(001) surface. Weak molecular chemisorption was observed for H2 approaching with its molecular axis parallel to the surface. The optimization of the adsorption geometries on the threefold hollow sites yields final configurations with H2 molecules move towards the top site at both coverages of 0.25 and 0.5 monolayer. A low dissociation barrier of 0.081 eV was determined for H2 dissociated from onefold top site with the H atoms falling into the two adjacent threefold hollow sites. The density of states analysis along the dissociation paths show that the hybridization of U 5f and H 1s states only occurs when H2 molecule is dissociated.

08 HYDROGEN↗

First-principles calculation of defect formation energies and electronic properties in stannate pyrochlores

The electronic structures and defect formation energies for a series of stannate pyrochlores Ln2Sn2O7 *Ln=La, Pr, Nd, Sm, Gd, Tb, Ho, Er, Lu, and Y* have been investigated using the first-principles total energy calculations. The calculated results show that Ln-site cation ionic radius, x-O48f, lattice constant and the covalency of the *Sn–O48f* bond have a significant affect on the defect formation energies. The cation-antisite defect has the lowest formation energy, as compared with that of other defects, indicating that cation disorder causes local oxygen disordering. The present studies suggest that Lu2Sn2O7 is the most resistant to ion beam-induced amorphization. The electronic structure calculations reveal that Ln2Sn2O7 compounds have direct band gaps of 2.64– 2.95 eV at the * point in the Brillouin zone. © 2008 American Institute of Physics.

36 MATERIALS SCIENCE↗

First-principles study of energetic and electronic properties of A2Ti2O7 (A=Sm, Gd, Er) pyrochlore

First-principles calculations have been carried out to study the electronic properties of A2Ti2O7 (A=Sm, Gd, Er) pyrochlores. It was found that f electrons have negligible effect on the structural and energetic properties, but have significant effect on the electronic properties. Density of state analysis shows that A-site 4f electrons do take part in the chemical bonding. Also, we found that bond is less covalent than and bonds, while bond in Gd2Ti2O7 is more covalent. It was proposed that for A2Ti2O7 (A = Sm, Gd, Er) pyrochlores, bonds may play more significant role in determining their radiation resistance to amorphization.

36 MATERIALS SCIENCE↗

First-principles study of sulfur passivation of GaP(001) surfaces at one-monolayer coverage

Using first-principles total energy method, we have studied the structural and electronic properties of Ga- and P-terminated GaP(001)(1×2) surfaces adsorbed with one monolayer of sulfur. It was found that the sulfur atoms prefer to occupy bridge sites and the periodicity becomes (1 × 1) on both Ga- and Pterminated surfaces. The S–Ga bond was confirmed to be stronger than the S–P bond. The electronic analysis showed that the surface state within the energy gap on the Ga-terminated GaP surface was noticeably reduced by the sulfur adsorption, while such reduction does not occur on the P-terminated surface due to the S–P antibonding state. The nearly filled S dangling bonds on the Ga-terminated surface make this surface resistant to contamination.

36 MATERIALS SCIENCE↗

Ab initio calculations of structural and energetic properties of defects in gallium nitride

Ab initio total energy calculations have been performed to investigate the properties of intrinsic defects in GaN. It is found that the nitrogen defects are more stable than the Ga defects under nitrogen-rich conditions, and the results are generally consistent with those obtained by recent first-principles calculations. For the four types of nitrogen interstitials investigated, relaxation of all configurations leads to a N–N<11-20> split configuration. The most stable configuration for Ga interstitials is the Ga octahedral interstitial, but the energy difference between the octahedral and tetrahedral configurations is small (<0.35 eV) and depends on the basis set employed. While the _N–N_ bond distance in the N–N split interstitial is very close to that of a free N2 molecule, the Mulliken charge analysis indicates that the N atoms are partially charged, which is in contrast with previous theoretical suggestions. Based on the calculated results, the relative stabilities of various defects in GaN are determined.

36 MATERIALS SCIENCE↗

Structural Phase Transitions in High-Pressure Wurtzite to Rocksalt Phase in GaN and SiC

Ab initio molecular dynamics simulations are employed to study the atomistic mechanisms and pathways of high-pressure phase transformation in GaN and SiC. Our simulations bring a fundamental level of understanding of the wurtzite to rocksalt phase transformation that undergoes inhomogeneous displacements via a tetragonal atomic configuration, and suggest that the transition path may be independent of the presence of d electrons on the cation in GaN. The discrepancies between experimental and theoretical studies of transition paths are discussed.

36 MATERIALS SCIENCE↗

Structural and bonding properties of stannate pyrochlores: a density functional theory investigation

First-principle calculations have been completed on a series of Ln2Sn2O7 (Ln= Sm, Gd, Tb, Ho, Er, Lu, Y, La, Pr and Nd) pyrochlores to study the effect of structural geometry and bond-type on the stability of the pyrochlore structure-type. Overlap population analysis showed that the bonds in stannate pyrochlores are much more covalent than the bonds, and a nonlinear relationship is observed between the or bond lengths and the Ln cation radii. The bonds are the most ionic among the metal-oxygen bonds. These results are consistent with experimental results. We note other factors, in addition to bond-type, that affect the stability of the pyrochlore structure.

36 MATERIALS SCIENCE↗

Tuning the band structures of single walled silicon carbide nanotubes with uniaxial strain: a first principles study

Electronic band structures of single-walled silicon carbide nanotubes are studied under uniaxial strain using first principles calculations. The band structure can be tuned by mechanical strain in a wide energy range. The band gap decreases with uniaxial tensile strain, but initially increases with uniaxial compressive strain and then decreases with further increases in compressive strain. These results may provide a way to tune the electronic structures of silicon carbide nanotubes, which may have promising applications in building nanodevices.

36 MATERIALS SCIENCE↗