Search NASA⌕ Search

Engineering topics

Xiao, Penghao

Publications and source records attributed to Xiao, Penghao.

At least 19 records

Efficient and interpretable graph network representation for angle-dependent properties applied to optical spectroscopy

Abstract Graph neural networks are attractive for learning properties of atomic structures thanks to their intuitive graph encoding of atoms and bonds. However, conventional encoding does not include angular information, which is critical for describing atomic arrangements in disordered systems. In this work, we extend the recently proposed ALIGNN (Atomistic Line Graph Neural Network) encoding, which incorporates bond angles, to also include dihedral angles (ALIGNN-d). This simple extension leads to a memory-efficient graph representation that captures the complete geometry of atomic structures. ALIGNN-d is applied to predict the infrared optical response of dynamically disordered Cu(II) aqua complexes, leveraging the intrinsic interpretability to elucidate the relative contributions of individual structural components. Bond and dihedral angles are found to be critical contributors to the fine structure of the absorption response, with distortions that represent transitions between more common geometries exhibiting the strongest absorption intensity. Future directions for further development of ALIGNN-d are discussed.

36 MATERIALS SCIENCE↗

Investigation and Suppression of Oxygen Release by LiNi 0.8 Co 0.1 Mn 0.1 O 2 Cathode under Overcharge Conditions

The safety issue of lithium-ion batteries is a crucial factor limiting their large-scale application. Therefore, it is of practical significance to evaluate the impact of their overcharge behavior because of the severe levels of oxygen release of cathode materials during this process. Here, by combining a variety of in situ techniques of spectroscopy and electron microscopy, this work studies the structural degradation of LiNi 0.8 Co 0.1 Mn 0.1 O 2 (NCM811) accompanying the oxygen release in the overcharge process. It is observed that a small amount of O 2 evolves from the initial surface at ≈4.7V. When charging to a higher voltage (≈5.5V), a large amount of O 2 evolves on the newly formed surface due to the occurrence of microcracks. Based on experimental results and theoretical calculations, it is determined that the oxygen release mainly occurs in the near-surface regions, where the remaining oxygen vacancies accumulate to create voids. To suppress the oxygen release, single-crystalline NCM811 with integrated structure is introduced and serves as a cathode, which can effectively inhibit morphology destruction and reduce the activation of lattice oxygen in the surface region. These findings provide a theoretical basis and effective strategy for improving the safety performance of Ni-rich cathode materials in practical applications.

25 ENERGY STORAGE↗

Detonation-induced transformation of graphite to hexagonal diamond

In this work, we explore the structural evolution of highly oriented pyrolytic graphite (HOPG) under detonation-induced shock conditions using in situ synchrotron x-ray diffraction in the ns timescale. We observe the formation of hexagonal diamond (lonsdaleite) at pressures above 50 GPa, in qualitative agreement with recent gas gun experiments. First-principles density functional calculations reveal that under uniaxial compression, the energy barrier for the transition toward hexagonal diamond is lower than that for cubic diamond. Finally, no indication of cubic diamond formation was observed up to >70 GPa.

36 MATERIALS SCIENCE↗

Kinetic Pathways Templated by Low-Temperature Intermediates during Solid-State Synthesis of Layered Oxides

Layered oxides have been the dominant cathodes in lithium-ion batteries, and among them, high-nickel (Ni) systems are attractive because of their high capacity. For practical use, synthetic control of stoichiometry and structural ordering is crucial but has been nontrivial due to the complexity inherent to synthesis reactions, which often proceed via nonequilibrium pathways. In this paper, we report here a combined in situ synchrotron X-ray diffraction and ab initio study of solid-state synthesis of layered oxides starting from acetate precursors for LiCoO 2 and LiNiO 2 and their solid solution LiNi 0.8 Co 0.2 O 2 . While all three systems ultimately evolve into the same thermodynamically stable layered phase ($R\overline{3}m$), each chemistry involves distinct metastable intermediates. We explain the phase progressions using a structural template model, demonstrating that during the synthesis of LiCoO 2 , the formed metastable spinel polymorph (Li 2 Co 2 O 4 ; $Fd\overline{3}m$) is a kinetically facile lithiation product of spinel Co 3 O 4 —the low-temperature (LT) intermediate from the decomposed Co-acetate. Similarly, in the Ni-based systems, the acetate decomposition products, rocksalts (Ni,Co)O, topotactically template the kinetic pathways of forming disordered rocksalts (Li x (Ni,Co) 2–x O 2 ; $Fm\overline{3}m$), consequently leading to off-stoichiometric Li x (Ni,Co)O 2 with undesired high Li/Ni mixing. These findings highlight new opportunities for engineering precursors to form LT intermediates that template the synthesis of target phases and structural properties.

36 MATERIALS SCIENCE↗

Effect of fluorination and Li-excess on the Li migration barrier in Mn-based cathode materials

Disordered rocksalt (DRX) Li-rich transition metal (TM) oxides, especially those based on Mn, are prospective high-energy-density cathode materials for the next generation of Li-ion batteries that use earth abundant metals. Fluorine substitution on the oxygen sublattice has been shown to reduce oxygen redox by lowering the average anion valence and increasing the amount of redox-active TM, and simultaneously improve energy density, average voltage and capacity retention. While these benefits of fluorination are well established, it is not well understood how F affects Li transport and therefore the rate performance of Mn-based DRX cathodes. Herein, we investigate the effects of both F substitution and the accompanying Li-excess on Li migration barriers using first-principles calculations. Finally, we demonstrate that F has a small negative effect on Li migration barriers while Li-excess decreases Li migration barriers. Because fluorination enables more Li-excess, these results do not predict any detrimental impact on Li transport.

25 ENERGY STORAGE↗

Highly reversible oxygen redox in layered compounds enabled by surface polyanions

Oxygen-anion redox in lithium-rich layered oxides can boost the capacity of lithium-ion battery cathodes. However, the over-oxidation of oxygen at highly charged states aggravates irreversible structure changes and deteriorates cycle performance. Here, we investigate the mechanism of surface degradation caused by oxygen oxidation and the kinetics of surface reconstruction. Considering Li 2 MnO 3 , we show through density functional theory calculations that a high energy orbital (lO 2p’ ) at under-coordinated surface oxygen prefers over-oxidation over bulk oxygen, and that surface oxygen release is then kinetically favored during charging. We use a simple strategy of turning under-coordinated surface oxygen into polyanionic (SO 4 ) 2- , and show that these groups stabilize the surface of Li 2 MnO 3 by depressing gas release and side reactions with the electrolyte. Experimental validation on Li 1.2 Ni 0.2 Mn 0.6 O 2 shows that sulfur deposition enhances stability of the cathode with 99.0% capacity remaining (194 mA h g -1 ) after 100 cycles at 1 C. Our work reveals a promising surface treatment to address the instability of highly charged layered cathode materials.

25 ENERGY STORAGE↗

Nudged elastic band method for solid-solid transition under finite deformation

Solid-state nudged elastic band (SSNEB) methods can be used for finding solid-solid transition paths when solids are subjected to external stress fields. However, previous SSNEB methods may lead to inaccurate barriers and deviated reaction paths for transitions under stress and finite deformation due to an inaccurate evaluation of the external work contributions in enthalpies. In this paper, a finite deformation nudged elastic band (FD-NEB) method is formulated for finding transition paths of solids under finite deformation. Applications of FD-NEB to a phase transition of silicon from the diamond phase to the β-tin phase under uniaxial compression are presented. Here, the results are compared with those from the generalized solid-state nudged elastic band method.

36 MATERIALS SCIENCE↗

Dynamic deformability of individual PbSe nanocrystals during superlattice phase transitions

The behavior of individual nanocrystals during superlattice phase transitions can profoundly affect the structural perfection and electronic properties of the resulting superlattices. However, details of nanocrystal morphological changes during superlattice phase transitions are largely unknown due to the lack of direct observation. Here, we report the dynamic deformability of PbSe semiconductor nanocrystals during superlattice phase transitions that are driven by ligand displacement. Real-time high-resolution imaging with liquid-phase transmission electron microscopy reveals that following ligand removal, the individual PbSe nanocrystals experience drastic directional shape deformation when the spacing between nanocrystals reaches 2 to 4 nm. The deformation can be completely recovered when two nanocrystals move apart or it can be retained when they attach. The large deformation, which is responsible for the structural defects in the epitaxially fused nanocrystal superlattice, may arise from internanocrystal dipole–dipole interactions.

36 MATERIALS SCIENCE↗

Metal–oxygen decoordination stabilizes anion redox in Li-rich oxides

Reversible high-voltage redox chemistry is an essential component of many electrochemical technologies, from (electro)catalysts to lithium-ion batteries. Oxygen-anion redox has garnered intense interest for such applications, particularly lithium-ion batteries, as it offers substantial redox capacity at more than 4 V versus Li/Li + in a variety of oxide materials. However, oxidation of oxygen is almost universally correlated with irreversible local structural transformations, voltage hysteresis and voltage fade, which currently preclude its widespread use. By comprehensively studying the Li 2-x Ir 1-y Sn y O 3 model system, which exhibits tunable oxidation state and structural evolution with y upon cycling, we reveal here that this structure–redox coupling arises from the local stabilization of short approximately 1.8 Å metal–oxygen π bonds and approximately 1.4 Å O–O dimers during oxygen redox, which occurs in Li 2-x Ir 1-y Sn y O 3 through ligand-to-metal charge transfer. Crucially, formation of these oxidized oxygen species necessitates the decoordination of oxygen to a single covalent bonding partner through formation of vacancies at neighbouring cation sites, driving cation disorder. These insights establish a point-defect explanation for why anion redox often occurs alongside local structural disordering and voltage hysteresis during cycling. Our findings offer an explanation for the unique electrochemical properties of lithium-rich layered oxides, with implications generally for the design of materials employing oxygen redox chemistry.

25 ENERGY STORAGE↗

Shear-Assisted Formation of Cation-Disordered Rocksalt NaMO 2 (M = Fe or Mn)

Herein we report the synthesis of cation-disordered rocksalt NaMO 2 (M = 3d transition metal), i.e., NaFeO 2–δ (δ ~ 0.18), for the first time via a martensitic-like phase transformation from β-NaFeO 2 . This disordered rocksalt NaFeO 2–δ does not exhibit long-range cation ordering, as evidenced by synchrotron X-ray diffraction, neutron diffraction, and transmission electron microscopy analyses. Pair distribution function analysis revealed that although the cation sublattice mostly preserved the rocksalt symmetry, O atoms were significantly displaced to accommodate the different Na + –O, Fe 2+ –O, and Fe 3+ –O bond lengths (~2.4, 2.1, and 2 Å, respectively). In addition, we confirmed the presence of O vacancies and partial Fe reduction from 3+ to 2+ in NaFeO 2–δ based on 57 Fe Mössbauer and X-ray absorption spectroscopy analyses. Controlled experiments revealed that three factors are essential for the successful synthesis of the rocksalt structure: (1) an appropriate precursor structure, (2) the application of a large stress by high-energy milling, and (3) the creation of O vacancies via carbon reduction. Density functional theory calculations demonstrated that these factors substantially affect the energetics of the minimum-energy reaction path of the phase transformation, making the highly metastable disordered rocksalt phase accessible. Our work suggests the effectiveness of mechanical milling to access metastable phases that are structurally related to the precursors via a shearing transformation. Utilizing this mechanism, we were able to predict and synthesize another cation-disordered rocksalt structure, NaMnO 2 , and explain the syntheses of several other related materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fast Mg 2+ diffusion in Mo 3 (PO 4 ) 3 O for Mg batteries

In this work, we identify a new potential Mg battery cathode structure Mo 3 (PO 4 ) 3 O, which is predicted to exhibit ultra-fast Mg 2+ diffusion and relatively high voltage based on first-principles density functional theory calculations. Nudged elastic band calculations reveal that the migration barrier of the percolation channel is only ~80 meV, which is remarkably low, and comparable to the best Li-ion conductors. This low barrier is verified by ab initio molecular dynamics and kinetic Monte Carlo simulations. The voltage and specific energy are predicted to be ~1.98 V and ~173 W h kg -1 , respectively. If confirmed by experiments, this material would have the highest known Mg mobility among inorganic compounds.

25 ENERGY STORAGE↗

Additional Sodium Insertion into Polyanionic Cathodes for Higher-Energy Na-Ion Batteries

Na-ion technology is increasingly studied as a low-cost solution for grid storage applications. Many positive electrode materials have been reported, mainly among layered oxides and polyanionic compounds. The vanadium oxy/flurophosphate solid solution Na 3 V 2 (PO 4 ) 2 F 3- y O 2 y (0 ≤ y ≤ 1), in particular, has proven the ability to deliver ≈500 Wh kg -1 , operating on the V 3+ /V 4+ (y = 0) or V 4+ /V 5+ redox couples (y = 1). This paper reports here on a significant increase in specific energy by enabling sodium insertion into Na 3 V 2 (PO 4 ) 2 FO 2 to reach Na 4 V 2 (PO 4 ) 2 FO 2 upon discharge. This occurs at ≈1.6 V and increases the theoretical specific energy to 600 Wh kg -1 , rivaling that of several Li-ion battery cathodes. This improvement is achieved by the judicious modification of the composition either as O for F substitution, or Al for V substitution, both of which disrupt Na-ion ordering and thereby enable insertion of the 4th Na. This paper furthermore shows from operando X-Ray Diffraction (XRD) that this energy is obtained in the cycling range Na 4 V 2 (PO 4 ) 2 FO 2 –NaV 2 (PO 4 ) 2 FO 2 with a very small overall volume change of 1.7%, which is one of the smallest volume changes for Na-ion cathodes and which is a crucial requisite for stable long-term cycling.

25 ENERGY STORAGE↗

Calculations of oxide formation on low-index Cu surfaces

Density-functional theory is used to evaluate the mechanism of copper surface oxidation. Reaction pathways of O{sub 2} dissociation on the surface and oxidation of the sub-surface are found on the Cu(100), Cu(110), and Cu(111) facets. At low oxygen coverage, all three surfaces dissociate O{sub 2} spontaneously. As oxygen accumulates on the surfaces, O{sub 2} dissociation becomes more difficult. A bottleneck to further oxidation occurs when the surfaces are saturated with oxygen. The barriers for O{sub 2} dissociation on the O-saturated Cu(100)-c(2×2)-0.5 monolayer (ML) and Cu(100) missing-row structures are 0.97 eV and 0.75 eV, respectively; significantly lower than those have been reported previously. Oxidation of Cu(110)-c(6×2), the most stable (110) surface oxide, has a barrier of 0.72 eV. As the reconstructions grow from step edges, clean Cu(110) surfaces can dissociatively adsorb oxygen until the surface Cu atoms are saturated. After slight rearrangements, these surface areas form a “1 ML” oxide structure which has not been reported in the literature. The barrier for further oxidation of this “1 ML” phase is only 0.31 eV. Finally the oxidized Cu(111) surface has a relatively low reaction energy barrier for O{sub 2} dissociation, even at high oxygen coverage, and allows for facile oxidation of the subsurface by fast O diffusion through the surface oxide. The kinetic mechanisms found provide a qualitative explanation of the observed oxidation of the low-index Cu surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗