Search NASA⌕ Search

Engineering topics

Xiao, Xiang

Publications and source records attributed to Xiao, Xiang.

10 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Search for Solar Boosted Dark Matter Particles at the PandaX-4T Experiment

We present a novel constraint on light dark matter utilizing 1.54 metric ton/year of data acquired from the PandaX-4T dual-phase xenon time projection chamber. This constraint is derived through detecting electronic recoil signals resulting from the interaction with solar-enhanced dark matter flux. Low-mass dark matter particles, lighter than a few MeV / c 2 , can scatter with the thermal electrons in the Sun. Consequently, with higher kinetic energy, the boosted dark matter component becomes detectable via contact scattering with xenon electrons, resulting in a few keV energy deposition that exceeds the threshold of PandaX-4T. We calculate the expected recoil energy in PandaX-4T considering the Sun’s acceleration with heavy mediators and the detection capabilities of the xenon detector. The first experimental search results using the xenon detector yield the most stringent upper limits cross section of 3.51 × 10 − 39 cm 2 at 0.08 MeV / c 2 for a solar boosted dark matter mass ranging from 0.02 to 10 MeV / c 2 , achieving a 23-fold improvement compared with earlier experimental studies. Published by the American Physical Society 2025

Shen, Guofang↗
DOE OSTI2024

Dynamic entity formed by protein and its hydration water

The interaction between protein and water plays a pivotal role in shaping the structure, dynamics, and function of biomacromolecules. A comprehensive understanding of this intricate interplay necessitates a systematic evaluation of interaction strength and its consequential impact on the dynamics of proteins and water across diverse protein systems. Despite numerous works on understanding the dynamics of water and proteins and the coupling between them, there are still unanswered questions. Here, we combine neutron scattering and isotope labeling to probe the dynamics of proteins and their hydration water in a variety of protein systems. We consider proteins of different structures and varying thermostability as well as proteins within living cells with distinct growth temperatures. Simultaneous characterization of protein and hydration water dynamics across diverse systems was achieved. Moreover, we performed water sorption isothermal measurements on three representative proteins to correlate the observed dynamics with the strength of the interaction energies governing each system. The experimental results underscore that proteins manifesting stronger attractive interactions with water display diffusionlike dynamics with higher flexibility upon hydration, concomitant with a reduced mobility in hydration water. Significantly, our findings suggest that, in fact, it is the interaction between protein and its hydration water that facilitates the transfer of mobility from water to protein, with stronger interactions correlating to greater protein flexibility and slower hydration water diffusion. Published by the American Physical Society 2024

Ye, Yongfeng (ORCID:0009000792374198)↗
DOE OSTI2024

Insight of Synthesis of Single Crystal Ni-Rich LiNi 1-x-y Co x Mn y O 2 Cathodes

Single-crystal Ni-rich LiNi 1-x-y Co x Mn y O 2 (NCM) cathodes have garnered widespread attention in the lithium-ion battery community due to their unique advantages in mechanical performance and their ability to minimize interfacial electrochemical side reactions. The synthesis of single-crystal materials with monodisperse and appropriate size, minimal lattice defects, and highly ordered structures is the key for high-performance batteries. However, achieving this goal poses challenges due to the lack of in-depth understanding regarding specific experimental parameters and the solid reaction mechanism during the synthesis process. Further, in this review, the aim is to provide an in-depth analysis of the critical process parameters involved in the synthesis and their impact on crystal morphology, structure, and electrochemical performance. Consequently, the first section focuses on the effect of the precursor morphology, lithium salt, atmosphere, and sintering procedure. In the second section, the study delves into an in-depth discussion of the solid reaction and crystal growth mechanism. Lastly, it is concluded by highlighting the prospects and challenges associated with the synthesis and application of single-crystal Ni-rich NCM cathodes.

25 ENERGY STORAGE↗
DOE OSTI2023

Cathode regeneration and upcycling of spent LIBs: toward sustainability

‘Green ambition towards sustainability’ is one of the hot research topics of the 21st century. With the sharp steering of the energy infrastructure toward fulfilling this radical expectation, the last decade has seen a global trend toward diversified sustainable renewable energy sources (such as solar, wind, and hydroelectric power) and electrification. Lithium-ion batteries (LIBs) are playing a significant role in this energy revolution. However, with the massive scale of the production of LIBs and their eventual retirement, attention has been turned to the erratic supply of raw materials used to manufacture these batteries and their disposal. Cathode regeneration technology is likely to be an optimal solution for the disposal of waste cathodes, aimed at non-destructively repairing and straightforwardly reusing degraded cathode materials for re-manufacturing LIBs with a shortened circular process, reasonable profits, and excellent efficiency. Additionally, cathode upcycling technology, aimed at upgrading the electrochemical performance of degraded materials, can be well adapted to the upgrading of battery chemistry and show excellent flexibility and potential for transforming the LIB industry from a resource-based to a circular economy. Thus, a holistic perspective based on the complete life cycle of LIBs is encouraged, and sustainability must be at the forefront regarding battery and pack design, raw material acquisition, materials synthesis, manufacturing, operating, retiring, and recycling processes of LIBs.

25 ENERGY STORAGE↗
DOE OSTI2023

Rational synthesis of high-performance Ni-rich layered oxide cathode enabled via probing solid-state lithiation evolution

Lithium (Li)-ion batteries using nickel (Ni)-rich layered oxide cathode have been pursued with interest due to high practical energy density. A fundamental understanding of the reaction pathways and structural evolution of the solid-phase synthesis of these materials is crucial for their rational design and process development for mass production. In this work, structural evolution during solid-state synthesis was traced via in situ technique, with a particular emphasis on the lithiation reaction and migration of transition metal (TM) ions. The sintering process is governed by the competitive relationship of decomposition and lithiation reactions, which can be regulated through temperature windows. Controlling the melting point of the Li sources, as well as their affinity to cathode precursors, is highly desired to maintain the layered ordering of TM ions throughout the whole synthesis process, which simplifies the manufacturing process and improves the quality of the manufactured cathode material.

25 ENERGY STORAGE↗
DOE OSTI2022

Ultrahigh rate capability of manganese based olivine cathodes enabled by interfacial electron transport enhancement

In this study, manganese-based Olivine is a promising cathode candidate with high energy and low cost for Li-ion batteries (LIBs). Its rate capability and cyclability challenges still remain even with nano-size and carbon coating. Herein, an ultrahigh rate performance is achieved by introducing an affinitive conductor to enhance the interfacial electron transport of LiMn 0.7 Fe 0.3 PO 4 via Li 3 V 2 (PO 4 ) 3 . It is found that the Li 3 V 2 (PO 4 ) 3 facilitates sp 2 hybridization to form a highly conductive carbon coating during the carbonized process. The composite 0.9LiMn 0.7 -Fe 0.3 PO 4 .0.1Li 3 V 2 (PO 4 ) 3 can deliver a capacity of 90.9 mAh g -1 and power density of 11444 W kg -1 at 50 C-rate. Both in situ X-ray diffraction and conductive-atomic force microscopy are conducted to understand the synergetic effect between LiMn 0.7 Fe 0.3 PO 4 and Li 3 V 2 (PO 4 ) 3 . The results suggest that the interfacial electron transfer between LiMn 0.2 Fe 0.3 PO 4 particles and the electron conducting medium, such as binder/carbon black composite, is greatly improved so that the highly Li + conductive nature of olivine materials can be fully unleashed. This work demonstrates the importance of efficient interfacial electron transfer to the active cathode particles, and opens up a new venue for the rational design of high-energy and high-power batteries.

25 ENERGY STORAGE↗
DOE OSTI2021

Constraining self-interacting dark matter with the full dataset of PandaX-II

Self-interacting dark matter (SIDM) is a leading candidate proposed to solve discrepancies between predictions of the prevailing cold dark matter theory and observations of galaxies. Many SIDM models predict the existence of a light force carrier that mediates strong dark matter self-interactions. If the mediator couples to the standard model particles, it could produce characteristic signals in dark matter direct detection experiments. We report searches for signals of SIDM models with a light mediator using the full dataset of the PandaX-II experiment, basing on a total exposure of 132 tonne-days. No significant excess over background is found, and our likelihood analysis leads to a strong upper limit on the dark matter-nucleon coupling strength. We further combine the PandaX-II constraints and those from observations of the light element abundances in the early universe, and show that direct detection and cosmological probes can provide complementary constraints on dark matter models with a light mediator.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Hydrogen production from lignocellulosic hydrolysate in an up-scaled microbial electrolysis cell with stacked bio-electrodes

Hydrogen production from renewable resources via microbial electrolysis cells (MECs) is a promising approach for sustainable energy production. Yet high hydrogen yield from real feedstocks has not been demonstrated in up-scaled MECs. In this study, a 10-L single chamber MEC with a high electrode surface area to volume ratio (66 m 2 /m 3 ) was constructed and electroactive cathodic biofilms were enriched for hydrogen evolution reaction. A high hydrogen yield of 91% was achieved using lignocellulosic hydrolysate with a hydrogen production rate of 0.71 L/L/D at an organic loading rate of 0.4 g/D. The anodic and cathodic microbial communities, with Enterococcus spp. as the known electroactive bacteria, were capable of achieving current densities of 13.7 A/m 2 and 16.5 A/m 2 , respectively. Finally, a machine learning algorithm was used to investigate the correlation between community data and electrochemical performance, and the critical genera on determining current density were identified.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Breaking the loop: Tackling homoacetogenesis by chloroform to halt hydrogen production-consumption loop in single chamber microbial electrolysis cells

The presence of homoacetogenesis and hydrogen production-consumption loop significantly hinders the efficient hydrogen recovery in single chamber microbial electrolysis cells (MECs). Furthermore, no effective inhibition method has been proposed against homoacetogens hitherto. In this study, we demonstrated the effectiveness of chloroform as a homoacetogen inhibitor in MECs. In small MECs (320 ml) operated in batch mode, chloroform with concentrations of 0.02% (v/v) and 0.03% (v/v) ceased homoacetogenesis with nonfermentable substrate (acetate), enhancing hydrogen yield and cathodic hydrogen recovery from 21% and 14% to 94% and 90%, respectively. Electrochemical performance was not significantly affected as current density (based on anode surface area) only decreased from 18 A/m 2 to 13 A/m 2 with chloroform concentration increased from 0% (v/v) to 0.03% (v/v). However, when using a fermentable substrate (glucose), the inhibition against homoacetogens by 0.01% (v/v) chloroform led to a significant decrease in current density possibly due to the decreased production of acetate, which reduced the substrate concentration for exoelectrogenesis. Nevertheless, in a larger MEC (10 L), using an immobilized sludge culture and higher glucose concentration (56mM), 0.02% (v/v) chloroform enhanced hydrogen production rate from 0 L/L/D to 4.9 L/L/D and current density from 12-16 A/m 2 to 18-21 A/m 2 . Microbial community analysis revealed that the amount of homoacetogenic Acetobacterium spp. was eliminated in the cathodic biofilms and planktonic cells by chloroform. Future improvement of this method, through reducing the residual chloroform concentration and developing more environment friendly inhibitor using similar mechanisms, may lead to the practical application in MECs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗