Search NASA⌕ Search

Engineering topics

Xie, X

Publications and source records attributed to Xie, X.

SU-E-J-193: Application of Surface Mapping in Detecting Swallowing for Head-&-Neck Cancer

Purpose: Recent evidence is emerging that long term swallowing function may be improved after radiotherapy for head-&-neck cancer if doses are limited to certain swallowing structures. Immobilization of patients with head-&-neck cancer is typically done with a mask. This mask, however, doesn’t limit patient swallowing. Patient voluntary or involuntary swallowing may introduce significant tumor motion, which can lead to suboptimal delivery. In this study, we have examined the feasibility of using surface mapping technology to detect patient swallowing during treatment and evaluated its magnitude. Methods: The C-RAD Catalyst system was used to detect the patient surface map. A volunteer lying on the couch was used to simulate the patient under treatment. A virtual marker was placed near the throat and was used to monitor the swallowing action. The target motion calculated by the Catalyst system through deformable registration was also collected. Two treatment isocenters, one placed close to the throat and the other placed posterior to the base-of-tongue, were used to check the sensitivity of surface mapping technique. Results: When the patient’s throat is not in the shadow of the patient’s chest, the Catalyst system can clearly identify the swallowing motion. In our tests, the vertical motion of the skin can reach to about 5mm. The calculated target motion can reach up to 1 cm. The magnitude of this calculated target motion is more dramatic when the plan isocenter is closer to the skin surface, which suggests that the Catalyst motion tracking technique is more sensitive to the swallowing motion with a shallower isocenter. Conclusion: Surface mapping can clearly identify patient swallowing during radiation treatment. This information can be used to evaluate the dosimetric impact of the involuntary swallowing. It may also be used to potentially gate head-&-neck radiation treatments. A prospective IRB approved study is currently enrolling patients in our institution. Research was funded through an Elekta grant.

60 APPLIED LIFE SCIENCES↗

SU-E-T-350: Verification of Gating Performance of a New Elekta Gating Solution: Response Kit and Catalyst System

Purpose: In this work, we have tested the performance of new respiratory gating solutions for Elekta linacs. These solutions include the Response gating and the C-RAD Catalyst surface mapping system.Verification measurements have been performed for a series of clinical cases. We also examined the beam on latency of the system and its impact on delivery efficiency. Methods: To verify the benefits of tighter gating windows, a Quasar Respiratory Motion Platform was used. Its vertical-motion plate acted as a respiration surrogate and was tracked by the Catalyst system to generate gating signals. A MatriXX ion-chamber array was mounted on its longitudinal-moving platform. Clinical plans are delivered to a stationary and moving Matrix array at 100%, 50% and 30% gating windows and gamma scores were calculated comparing moving delivery results to the stationary result. It is important to note that as one moves to tighter gating windows, the delivery efficiency will be impacted by the linac's beam-on latency. Using a specialized software package, we generated beam-on signals of lengths of 1000ms, 600ms, 450ms, 400ms, 350ms and 300ms. As the gating windows get tighter, one can expect to reach a point where the dose rate will fall to nearly zero, indicating that the gating window is close to beam-on latency. A clinically useful gating window needs to be significantly longer than the latency for the linac. Results: As expected, the use of tighter gating windows improved delivery accuracy. However, a lower limit of the gating window, largely defined by linac beam-on latency, exists at around 300ms. Conclusion: The Response gating kit, combined with the C-RAD Catalyst, provides an effective solution for respiratorygated treatment delivery. Careful patient selection, gating window design, even visual/audio coaching may be necessary to ensure both delivery quality and efficiency. This research project is funded by Elekta.

07 ISOTOPE AND RADIATION SOURCES↗

SU-E-T-401: Feasibility Study of Using ABC to Gate Lung SBRT Treatment

Purpose: The current SBRT treatment techniques include free breathing (FB) SBRT and gated FB SBRT. Gated FB SBRT has smaller target and less lung toxicity with longer treatment time. The recent development of direct connectivity between the ABC and linac allowing for automated beam gating. In this study, we have examined the feasibility of using ABC system to gate the lung SBRT treatment. Methods: A CIRS lung phantom with a 3cm sphere-insert and a moving chest plate was used in this study. Sinusoidal motion was used for the FB pattern. An ABC signal was imported to simulate breath holds. 4D-CT was taken in FB mode and average-intensity-projection (AIP) was used to create FB and 50% gated FB SBRT planning CT. A manually gated 3D CT scan was acquired for ABC gated SBRT planning.An SBRT plan was created for each treatment option. A surface-mapping system was used for 50% gating and ABC system was used for ABC gating. A manually gated CBCT scan was also performed to verify setup. Results: Among three options, the ABC gated plan has the smallest PTV of 35.94cc, which is 35% smaller comparing to that of the FB plan. Consequently, the V20 of the left lung reduced by 15% and 23% comparing to the 50% gated FB and FB plans, respectively. The FB plan took 4.7 minutes to deliver, while the 50% gated FB plan took 18.5 minutes. The ABC gated plan delivery took only 10.6 minutes. A stationary target with 3cm diameter was also obtained from the manually gated CBCT scan. Conclusion: A strategy for ABC gated lung SBRT was developed. ABC gating can significantly reduce the lung toxicity while maintaining the target coverage. Comparing to the 50% gated FB SBRT, ABC gated treatment can also provide less lung toxicity as well as improved delivery efficiency. This research is funded by Elekta.

60 APPLIED LIFE SCIENCES↗

TWP-ICE Global Atmospheric Model Intercomparison: Convection Responsiveness and Resolution Impact

Results are presented from an intercomparison of global atmospheric model (GAM) simulations of tropical convection during the Tropical Warm Pool-International Cloud Experiment (TWP-ICE). The distinct cloud properties, precipitation, radiation, and vertical diabatic heating profiles associated with three different monsoon regimes (wet, dry, and break) from available observations are used to evaluate 9 GAM forecasts initialized daily from realistic global analyses. All models well captured the evolution of large-scale circulation and the thermodynamic fields, but cloud properties differed substantially among models. For example, liquid water path and ice water path differed by up to two orders of magnitude. Compared with the relatively well simulated top-heavy heating structures during the wet and break period, most models had difficulty in depicting the bottom-heavy heating profiles associated with cumulus congestus. The best performing models during this period were the ones whose convection scheme was most responsive to the free tropospheric humidity. Compared with the large impact of cloud and convective parameterizations on model cloud and precipitation characteristics, resolution has relatively minor impact on simulated cloud properties. However, one feature that was influence by the resolution study in several models was the diurnal cycle of precipitation. Peaking at a different time from convective precipitation, large-scale precipitation generally increases in high resolution forecasts and modulates the total precipitation diurnal cycle. Overall, the study emphasizes the importance of more environmental responsive convective parameterizations to capture various types of convection and the substantial diversity among large-scale cloud and precipitation schemes in current GAMs. This experiment has also demonstrated itself to be a very useful testbed for those developing cloud and convection schemes in these models.

58 GEOSCIENCES↗

The Distant Morphological and Petrological Features of Shock Melt Veins in the Suizhou L6 Condrite

The morphology and petrology of distinct melt veins in the Suizhou L6 chondrite have been investigated using scanning electron microscopy, electron microprobe analyses, and Raman spectroscopy, synchrotron energy-dispersive diffraction, and transmission electron microscopy. It is found that the melt veins in the Suizhou meteorite morphologically are the simplest, straightest, and thinnest among all shock veins known from meteorites. At first glance, these veins look like fine fractures, but petrologically they are solid melt veins of chondritic composition and consist of fully crystalline materials of two distinct lithological assemblages, with no glassy material remaining. The Suizhou melt veins contain the most abundant high-pressure mineral species when compared with all other veins known in chondrites. Thus, these veins in Suizhou are classified as shock veins. All rock-forming and almost all accessory minerals in the Suizhou shock veins have been transformed to their high-pressure polymorphs, and no fragments of the precursor minerals remain in the veins. Among the 11 high-pressure mineral phases identified in the Suizhou veins, three are new high-pressure minerals, namely, tuite after whitlockite, xieite, and the CF phase after chromite. On the basis of transformation of plagioclase into maskelynite, it is estimated that the Suizhou meteorite experienced shock pressures and shock temperatures up to 22 GPa and 1000 C, respectively. Shearing and friction along shock veins raised the temperature up to 1900-2000 C and the pressure up to 24 GPa within the veins. Hence, phase transition and crystallization of high-pressure minerals took place only in the Suizhou shock veins. Fast cooling of the extremely thin shock veins is regarded as the main reason that up to 11 shock-induced high-pressure mineral phases could be preserved in these veins.

58 GEOSCIENCES↗

Assessment of fuel-cycle energy use and greenhouse gas emissions for Fischer-Tropsch diesel from coal and cellulosic biomass.

This study expands and uses the GREET (Greenhouse Gases, Regulated Emissions, and Energy Use in Transportation) model to assess the effects of carbon capture and storage (CCS) technology and cellulosic biomass and coal cofeeding in Fischer-Tropsch (FT) plants on energy use and greenhouse gas (GHG) emissions of FT diesel (FTD). To demonstrate the influence of the coproduct credit methods on FTD life-cycle analysis (LCA) results, two allocation methods based on the energy value and the market revenue of different products and a hybrid method are employed. With the energy-based allocation method, fossil energy use of FTD is less than that of petroleum diesel, and GHG emissions of FTD could be close to zero or even less than zero with CCS when forest residue accounts for 55% or more of the total dry mass input to FTD plants. Without CCS, GHG emissions are reduced to a level equivalent to that from petroleum diesel plants when forest residue accounts for 61% of the total dry mass input. Moreover, we show that coproduct method selection is crucial for LCA results of FTD when a large amount of coproducts is produced.

01 COAL, LIGNITE, AND PEAT↗