Search NASA⌕ Search

Engineering topics

Xu, Fang

Publications and source records attributed to Xu, Fang.

At least 19 records

The surface chemistry of cuprous oxide

The chemical and electronic properties of copper combined with its large natural abundance lend this material to impact a wide range of technological applications, including heterogeneous catalysis. The reactivity of copper in its Cu 1+ oxidation state makes this specific configuration relevant in various chemical reactions, but the facile redox properties of copper make the isolation of individual states for fundamental studies difficult. Here, in this study, we review three Cu 2 O model systems used to study the interaction of Cu 1+ with small molecules making use of surface science techniques: Cu 2 O/Cu(111), thin polycrystalline Cu 2 O films on Cu foil, and bulk Cu 2 O crystals. Advantages and disadvantages of each system are discussed and exemplified through case studies of chemical adsorption and reactivity studies.

36 MATERIALS SCIENCE↗

Probing the muon ( g − 2) anomaly at the LHC in final states with two muons and two taus

The longstanding muon (g - 2) anomaly, as well as some hints of lepton flavor universality violation in B-meson decays, could be signaling new physics beyond the Standard Model (SM). A minimal R-parity-violating supersymmetric framework with light third-generation sfermions (dubbed as ‘RPV3’) provides a compelling solution to these flavor anomalies, while simultaneously addressing other pressing issues of the SM. We propose a new RPV3 scenario for the solution of the muon (g - 2) anomaly, which leads to an interesting LHC signal of $µ$ + $µ$ - $τ$ + $τ$ - final state. We analyze the Run-2 LHC multilepton data to derive stringent constraints on the sneutrino mass and the relevant RPV coupling in this scenario. We then propose dedicated selection strategies to improve the bound even with the existing dataset. We also show that the high-luminosity LHC will completely cover the remaining muon (g - 2)-preferred parameter space, thus providing a robust, independent test of the muon (g - 2) anomaly.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Atomistic insight into the ferroelastic post-stishovite transition by high-pressure single-crystal X-ray diffraction

Abstract The post-stishovite transition is a classic pseudo-proper typed ferroelastic transition with a symmetry-breaking spontaneous strain. This transition has been studied using high-pressure spontaneous strains, optic modes, and elastic moduli (Cij) based on the Landau modeling, but its atomistic information and structural distortion remain poorly understood. Here we have conducted synchrotron single-crystal X-ray diffraction measurements on stishovite crystals up to 75.3 GPa in a diamond-anvil cell. Analysis of the data reveals atomic positions, bond lengths, bond angles, and variations of SiO6 octahedra across the transition at high pressure. Our results show that the O coordinates split at ~51.4 GPa, where the apical and equatorial Si-O bond lengths cross over, the SiO6 octahedral distortion vanishes, and the SiO6 octahedra start to rotate about the c axis. Moreover, distortion mode analysis shows that an in-plane stretching distortion (GM1+ mode) occurs in the stishovite structure at high pressure while a rotational distortion (GM2+ mode) becomes dominant in the post-stishovite structure. These results are used to correlate with elastic moduli and Landau parameters (symmetry-breaking strain e1–e2 and order parameter Q) to provide atomistic insight into the ferroelastic transition. When the bond lengths of two Si-O bonds are equal due to the contribution from the GM1+ stretching mode, C11 converges with C12, and the shear wave VS1[110] polarizing along [110] and propagating along [110] vanishes. Values of e1–e2 and Q are proportional to the SiO6 rotation angle from the occurrence of the GM1+ rotational mode in the post-stishovite structure. Our results on the pseudo-proper type transition are also compared with that for the proper type in albite and improper type in CaSiO3 perovskite. The symmetry-breaking strain, in all these types of transitions, arises as the primary effect from the structural angle (such as SiO6 rotation or lattice constant angle) and its relevant distortion mode in the low-symmetry ferroelastic phase.

Geochemistry & Geophysics↗

Conversion of CO 2 to Methanol and Ethanol on Pt/CeO x /TiO 2 (110): Enabling Role of Water in C–C Bond Formation

The surface chemistry of alcohol synthesis from CO 2 hydrogenation has been investigated using kinetic testing, ambient pressure x-ray photoelectron spectroscopy (AP-XPS) and DFT calculations over a multicomponent system where Pt and ceria nanoparticles coexisted on a titania template, Pt/CeO x /TiO 2 (110). Due to its high ability to bind and activate CO 2 , not seen for typical Cu-ZnO catalysts, the Pt-CeO x -TiO 2 interface is excellent for the hydrogenation of CO 2 to methanol with some ethanol also being produced (21% selectivity). The results of AP-XPS and DFT calculations indicate that the active state involves a mixture of Ti 4+ /Ti 3+ , Ce 3+ and Pt 0 /Pt + . A fast pathway for the formation of CH 3 O species is only plausible when Ce 3+ and Pt are present. The addition of water to the reaction feed facilitates the first hydrogenation of CO 2 and substantially enhances the surface coverage of C-containing species (CH 3 O, HCOO, CO 3 , CH x ), facilitating the formation of C-C bonds and the production of ethanol (38% selectivity).

36 MATERIALS SCIENCE↗

Enhanced Oxide Reduction by Hydrogen at Cuprous Oxide–Copper Interfaces near Ascending Step Edges

We report that understanding the dynamic processes involved in the interaction of hydrogen with oxides is of fundamental importance in catalysis. This paper probes the reduction of Cu 2 O-‘29’ surfaces by hydrogen at room temperature combining in situ ambient pressure scanning tunneling microscopy (STM), X-ray photoelectron spectroscopy (XPS), and density functional theory (DFT) calculations. Reduction of the atomic layer thin Cu 2 O film is observed to be preferentially initiated2 at step edges and terrace defects, where perfect Cu 2 O(111) terraces are found to be stable towards hydrogenation under the same conditions. After a long induction period, regions of partially reduced Cu 2 O-‘29’ and metallic Cu co-exist before the surface is fully reduced to Cu(111). The reduction rate strongly depends on the nature of nearby Cu step edges. We propose a mechanism for the reduction of Cu 2 O-‘29’ by hydrogen where free copper atoms from ascending metallic step edges facilitate the formation of active ensembles for H 2 dissociation and transfer H to the edges of Cu2O regions

08 HYDROGEN↗

Replication Data for: Hydrogen migration at restructuring palladium-silver oxide boundaries dramatically enhances reduction rate of silver oxide

The data underlying this published work have been made publicly available in this repository as part of the IMASC Data Management Plan. This work was supported as part of the Integrated Mesoscale Architectures for Sustainable Catalysis (IMASC), an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, Basic Energy Sciences under Award # DE-SC0012573.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Replication Data for: Stabilization of a nanoporous NiCu dilute alloy catalyst for non-oxidative ethanol dehydrogenation

The data underlying this published work have been made publicly available in this repository as part of the IMASC Data Management Plan. This work was supported as part of the Integrated Mesoscale Architectures for Sustainable Catalysis (IMASC), an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, Basic Energy Sciences under Award # DE-SC0012573.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Adsorption and activation of CO 2 on Pt/CeOx/TiO 2 (110): Role of the Pt-CeO x interface

The adsorption and dissociation of CO 2 on TiO 2 (110), CeO x /TiO 2 (110) and Pt/CeO x /TiO 2 (110) surfaces has been examined using Ambient Pressure X-ray Photoelectron Spectroscopy (AP-XPS). The substrates under study exhibited different degrees of complexity which were tested for the binding of the adsorbate and the cleavage of C-O bonds. The surfaces were prepared by depositing CeO x (0.1 ML) onto TiO 2 (110) to form a mixed oxide support, onto which Pt nanoparticles (0.2 ML) were deposited. This configuration yields a complex set of interfaces between metal and oxides and we have systematically titrated the active role of each component (Pt 4f, Ce 3d and Ti 2p regions) and the arising surface intermediates (C 1s and O 1s regions). CO 2 barely bonds to stoichiometric TiO 2 (110). It heals oxygen vacancies of this oxide surface (CO 2,gas → CO gas + O a ) and does not form stable carbonates. A stable carbonate was seen upon adsorption of CO 2 on CeO x /TiO 2 (110) and on this type of substrate the adsorbate also removed O vacancies leading to the oxidation of Ti 3+ and Ce 3+ sites. Pt nanoparticles dispersed on CeO x /TiO 2 (110) were highly effective for the binding and dissociation of CO 2 , with the formation of CO 3 , CO, C and CH x species on the Pt/CeO x /TiO 2 (110) system. The results of theoretical calculations based on density-functional theory (DFT) show that Pt/CeOx/TiO2(110) binds CO2 much stronger than surfaces of bulk platinum {(111), (100), (110)} or other late transition metals. On a Pt-CeO x interface, the molecule adsorbs with a bent configuration (~ 130° O-C-O bond angle) and with a substantial elongation (~ 0.1 Å) of the C-O bonds, facilitating its transformation into high value chemicals.

36 MATERIALS SCIENCE↗

Facile Decomposition of Organophosphonates by Dual Lewis Sites on a Fe 3 O 4 (111) Film

Dimethyl methylphosphonate (DMMP) is used as a simulant for toxic nerve agents and pesticides, rendering the understanding of surface chemistry requisite to design effective materials for organophosphonate (catalytic) decomposition at room temperature. In this work, DMMP surface chemistry is studied on an iron oxide surface in a very well-defined environment using temperature-programmed reaction, isotopic labeling, scanning tunneling microscopy, X-ray photoelectron spectroscopy, and density functional theory. DMMP, (CH 3 O) 2 P(O)(CH 3 ), dissociates to yield methoxy and methyl methylphosphonate, (CH 3 O)P(O) 2 (CH 3 ), on the surface at room temperature. At higher temperatures, dimethyl ether is formed via intramolecular reaction, followed by the formation of formaldehyde and methanol from adsorbed methoxy decomposition during temperature-programmed reaction. Ultimately, stochiometric combustion at 870 K produces CO, H 2 C=O, and CO 2 via reaction with lattice oxygen, with PO x remaining on the surface. Excess oxygen from the bulk is required to drive these higher temperature pathways. Neither hydrolysis nor a photoreaction is observed, when exposing the adsorbed DMMP to water or light above the band gap, respectively. No evolution of P-containing species is detected, indicating efficient trapping of this contaminant. The activity for DMMP decomposition at room temperature is reduced by the accumulation of PO x . However, a significant amount of reaction persists after multiple temperature-programmed reaction experiments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydrogen migration at restructuring palladium–silver oxide boundaries dramatically enhances reduction rate of silver oxide

Heterogeneous catalysts are complex materials with multiple interfaces. A critical proposition in exploiting bifunctionality in alloy catalysts is to achieve surface migration across interfaces separating functionally dissimilar regions. Herein, we demonstrate the enhancement of more than 10 4 in the rate of molecular hydrogen reduction of a silver surface oxide in the presence of palladium oxide compared to pure silver oxide resulting from the transfer of atomic hydrogen from palladium oxide islands onto the surrounding surface formed from oxidation of a palladium-silver alloy. The palladium-silver interface also dynamically restructures during reduction, resulting in silver-palladium intermixing. This study clearly demonstrates the migration of reaction intermediates and catalyst material across surface interfacial boundaries in alloys with a significant effect on surface reactivity, having broad implications for the catalytic function of bimetallic materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Oxygen adsorption on spontaneously reconstructed Au(511)

The four-fold site on {100} facets, which are potential catalytic sites on high-curvature gold nanoparticles, is difficult to prepare on a gold single crystal due to surface reconstruction. Here, the Au(511) surface with a high density of step edges and a well-maintained {100} local structure was studied by scanning tunneling microscopy (STM), temperature programmed reaction spectroscopy (TPRS), and density functional theory (DFT) calculations. Annealing at 550 K and 870 K induces reconstruction on the Au(511) surface to a mixture of (311) and (711) micro-terraces. At room temperature and low oxygen coverage, oxygen adsorbs at both three- and four-fold sites on the surface, leading to a well-ordered zig-zag structure. Oxygen atoms cause significant orbital hybridization and a slight displacement of the gold atoms to which they bind. High oxygen coverages induce the formation of clusters, which are not active towards oxidation of isopropanol at room temperature and a pressure of 10-10 mbar. Oxygen adsorption saturates at 1 monolayer (ML), and two separate oxygen recombinative desorption peaks were observed at coverages above 0.11 ML. Our characterization of this surface and the O adsorption structure allows future studies of {100} micro-terraces for oxidation reactions, which contributes to studies on gold-based catalysts with an irregular shape.

catalysis (heterogeneous), mesostructured material↗

Potassium-Promoted Reduction of Cu 2 O/Cu(111) by CO

In situ X-ray photoelectron spectroscopy (XPS), infrared reflection absorption spectroscopy (IRRAS), and scanning tunneling microscopy (STM) were used to study the reduction of potassium-modified Cu 2 O/Cu(111) by CO. By following the time evolution of the O 1s peak of Cu 2 O, we determined that the apparent activation energy for Cu 2 O reduction by 2 × 10 –4 Torr CO is decreased by ~30% in the presence of K. On the K-modified surface, both XPS and IRRAS data show the formation of a surface species identified by IRRAS as carbonate (CO 3 2– ), likely forming a K + -CO 3 2– complex, which is stable up to 500 K. STM images show that K + -CO 3 2– complexes form chains around reduced Cu islands, thereby hindering the mass transfer of Cu atoms and preventing the reconstruction of the surface. Theoretical calculations show that the formation of carbonate on the K-modified “44” Cu 2 O structure is thermodynamically favorable compared to the formation of CO 2 on either the bare or K-modified surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Molecular-scale Understanding of Selective Oxidative Transformations of Alcohols Promoted by Au and Au-based Alloys

This project developed a molecular-scale mechanistic framework for complex selective oxidation of alcohols and amines on O-covered Au and Ag-Au alloys that guides the design of selective and energy efficient processes. Our work has led to the discovery of new classes of reactions. We have also bridged a wide range of pressures and materials complexity by demonstrating catalytic activity using nanoporous Au catalysts. The selective oxidation of alcohols with each other and with other reactants, such as CO or amines, were focused on in this work because it is a key technology for large-scale chemical synthesis. Theory and experiment were combined to understand selective oxidation reactions on Au. Significant accomplishments are: (i) development of molecular-scale mechanisms for selective alcohol oxidation over Au surfaces; (ii) discovery of two new classes of reactions on O/Au—amide synthesis from amines and aldehydes and carbonylation of alcohols; and, (iii) demonstration that the mechanisms derived from our fundamental work predict the conditions for efficient catalysis using nanoporous Au catalysts under flow conditions at atmospheric pressure. This work has made an unprecedented connection between fundamental surface science studies and their implementation under catalytic conditions. This research fits squarely in the DOE-BES mission articulated in several BES Basic Research Needs (BRN) reports. “Catalysis for Energy” emphasizes the need to fabricate, design, characterize, and assemble new structures, including nanoscale alloys, and to understand and model their chemical behavior for energy-related applications. Our studies of nanoporous materials also exploit unique mesoscale phenomena to address complex energy-related issues (http://www.meso2012.com/).

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Spatially Nonuniform Reaction Rates during Selective Oxidation on Gold

Here, the nonuniform reactivity of adsorbed oxygen during the selective oxidation of methanol on Au(110)-(1×2) was demonstrated using in situ scanning tunneling microscopy (STM), establishing the importance of both atomic and mesoscale structure in determining reaction kinetics. At coverages above 0.06 ML, oxygen consumption occurs preferentially along [$1\overline{10}$] direction, creating local regions completely devoid of oxygen between oxygen islands. The directionally specific reactivity is attributed to a combination of the weaker binding of oxygen atoms at chain termini and the release of surface strain induced by O bonding to Au. The generality of this phenomenon is illustrated by analogous, but kinetically contrasting behavior, for reaction of 2-propanol with oxygen covered Au(110)-(1×2). Even at low O coverages, there are structurally related changes in the reactivity for the reaction with methanol. With decreasing O coverage, a slow reaction period is followed by a fast reaction period, the latter starting when oxygen coverage decreases to ~0.06 monolayer, independent of the initial coverage. This increase in reactivity is attributed to a sudden destabilization of the island structure. These findings demonstrate that both local and mesocale structures can affect reactivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗