Search NASA⌕ Search

Engineering topics

Xu, Jian

Publications and source records attributed to Xu, Jian.

At least 19 records

Amidination of ligands for chemical and field-effect passivation stabilizes perovskite solar cells

Surface passivation has driven the rapid increase in the power conversion efficiency (PCE) of perovskite solar cells (PSCs). However, state-of-the-art surface passivation techniques rely on ammonium ligands that suffer deprotonation under light and thermal stress. We developed a library of amidinium ligands, of interest for their resonance effect–enhanced N–H bonds that may resist deprotonation, to increase the thermal stability of passivation layers on perovskite surfaces. This strategy resulted in a >10-fold reduction in the ligand deprotonation equilibrium constant and a twofold increase in the maintenance of photoluminescence quantum yield after aging at 85°C under illumination in air. Here, implementing this approach, we achieved a certified quasi–steady-state PCE of 26.3% for inverted PSCs; and we report retention of ≥90% PCE after 1100 hours of continuous 1-sun maximum power point operation at 85°C.

Yang, Yi↗

A Generation-Storage Coordination Dispatch Strategy for Power System Based on Causal Reinforcement Learning

In the backdrop of global energy transformation, power systems integrating high proportions of renewable energy sources are facing unprecedented challenges in operational stability and dispatch efficiency. To address these challenges, this study introduces a generation-storage coordination real-time dispatch strategy based on Causal Power System Dynamic Reinforcement Learning (CPSDRL). Diverging from traditional reinforcement learning approaches, CPSDRL innovatively incorporates causal inference within the state prediction model - the crux of model-based reinforcement learning - thereby establishing the Power Causal Dynamic Model (PCDM). Assisted by the prior knowledge of power systems, the model significantly enhances prediction accuracy and reliability through a two-stage training process. Utilizing PCDM, this study further applies a direct policy search algorithm to optimize the real-time dispatch strategy. Experimental results indicate that the proposed method improves the stability of generation-storage coordination real-time dispatch and exhibits competitive advantages in sample efficiency and computational speed, compared to traditional model-based and model-free reinforcement learning algorithms. This method is expected to enhance the practicality and adaptability of causal reinforcement learning techniques in power system scheduling and control.

causal reinforcement learning↗

Improved charge extraction in inverted perovskite solar cells with dual-site-binding ligands

Inverted (pin) perovskite solar cells (PSCs) afford improved operating stability in comparison to their nip counterparts but have lagged in power conversion efficiency (PCE). The energetic losses responsible for this PCE deficit in pin PSCs occur primarily at the interfaces between the perovskite and the charge-transport layers. Additive and surface treatments that use passivating ligands usually bind to a single active binding site: This dense packing of electrically resistive passivants perpendicular to the surface may limit the fill factor in pin PSCs. We identified ligands that bind two neighboring lead(II) ion (Pb 2+ ) defect sites in a planar ligand orientation on the perovskite. We fabricated pin PSCs and report a certified quasi–steady state PCE of 26.15 and 24.74% for 0.05– and 1.04–square centimeter illuminated areas, respectively. The devices retain 95% of their initial PCE after 1200 hours of continuous 1 sun maximum power point operation at 65°C.

Science & Technology - Other Topics↗

A thermotropic liquid crystal enables efficient and stable perovskite solar modules

Perovskite solar cells have seen impressive progress in performance and stability, yet maintaining efficiency while scaling area remains a challenge. Here we find that additives commonly used to passivate large-area perovskite films often co-precipitate during perovskite crystallization and aggregate at interfaces, contributing to defects and to spatial inhomogeneity. Here we develop design criteria for additives to prevent their evaporative precipitation and enable uniform passivation of defects. We explored liquid crystals with melting point below the perovskite processing temperature, functionalization for defect passivation and hydrophobicity to improve device stability. We find that thermotropic liquid crystals such as 3,4,5-trifluoro-4'-(trans-4-propylcyclohexyl)biphenyl enable large-area perovskite films that are uniform, low in defects and stable against environmental stress factors. We demonstrate modules with a certified stabilized efficiency of 21.1% at an aperture area of 31 cm 2 and enhanced stability under damp-heat conditions (ISOS-D-3, 85% relative humidity, 85 °C) with T 86 (the duration for the efficiency to decay to 86% of the initial value) of 1,200 h, and reverse bias with (ISOS-V-1, negative maximum-power-point voltage) and without bypass diodes.

14 SOLAR ENERGY↗

Molecular surface programming of rectifying junctions between InAs colloidal quantum dot solids

Heavy-metal-free III–V colloidal quantum dots (CQDs) show promise in optoelectronics: Recent advancements in the synthesis of large-diameter indium arsenide (InAs) CQDs provide access to short-wave infrared (IR) wavelengths for three-dimensional ranging and imaging. In early studies, however, we were unable to achieve a rectifying photodiode using CQDs and molybdenum oxide/polymer hole transport layers, as the shallow valence bandedge (5.0 eV) was misaligned with the ionization potentials of the widely used transport layers. This occurred when increasing CQD diameter to decrease the bandgap below 1.1 eV. Here, we develop a rectifying junction among InAs CQD layers, where we use molecular surface modifiers to tune the energy levels of InAs CQDs electrostatically. Previously developed bifunctional dithiol ligands, established for II-VI and IV-VI CQDs, exhibit slow reaction kinetics with III-V surfaces, causing the exchange to fail. Here, we study carboxylate and thiolate binding groups, united with electron-donating free end groups, that shift upward the valence bandedge of InAs CQDs, producing valence band energies as shallow as 4.8 eV. Photophysical studies combined with density functional theory show that carboxylate-based passivants participate in strong bidentate bridging with both In and As on the CQD surface. The tuned CQD layer incorporated into a photodiode structure achieves improved performance with EQE (external quantum efficiency) of 35% (>1 μm) and dark current density < 400 nA cm -2 , a >25% increase in EQE and >90% reduced dark current density compared to the reference device. This work represents an advance over previous III-V CQD short-wavelength IR photodetectors (EQE < 5%, dark current > 10,000 nA cm -2 ).

36 MATERIALS SCIENCE↗

Engineering ligand reactivity enables high-temperature operation of stable perovskite solar cells

Perovskite solar cells (PSCs) consisting of interfacial two- and three-dimensional heterostructures that incorporate ammonium ligand intercalation have enabled rapid progress toward the goal of uniting performance with stability. However, as the field continues to seek ever-higher durability, additional tools that avoid progressive ligand intercalation are needed to minimize degradation at high temperatures. We used ammonium ligands that are nonreactive with the bulk of perovskites and investigated a library that varies ligand molecular structure systematically. Here, we found that fluorinated aniliniums offer interfacial passivation and simultaneously minimize reactivity with perovskites. Using this approach, we report a certified quasi–steady-state power-conversion efficiency of 24.09% for inverted-structure PSCs. In an encapsulated device operating at 85°C and 50% relative humidity, we document a 1560-hour T85 at maximum power point under 1-sun illumination.

14 SOLAR ENERGY↗

All-perovskite tandem solar cells with improved grain surface passivation

All-perovskite tandem solar cells hold the promise of surpassing the efficiency limits of single-junction solar cells; however, until now, the best-performing all-perovskite tandem solar cells have exhibited lower certified efficiency than have single-junction perovskite solar cells. A thick mixed Pb–Sn narrow-bandgap subcell is needed to achieve high photocurrent density in tandem solar cells, yet this is challenging owing to the short carrier diffusion length within Pb–Sn perovskites. Here we develop ammonium-cation-passivated Pb–Sn perovskites with long diffusion lengths, enabling subcells that have an absorber thickness of approximately 1.2 μm. Molecular dynamics simulations indicate that widely used phenethylammonium cations are only partially adsorbed on the surface defective sites at perovskite crystallization temperatures. The passivator adsorption is predicted to be enhanced using 4-trifluoromethyl-phenylammonium (CF3-PA), which exhibits a stronger perovskite surface-passivator interaction than does phenethylammonium. By adding a small amount of CF3-PA into the precursor solution, we increase the carrier diffusion length within Pb–Sn perovskites twofold, to over 5 μm, and increase the efficiency of Pb–Sn perovskite solar cells to over 22%. Here, we report a certified efficiency of 26.4% in all-perovskite tandem solar cells, which exceeds that of the best-performing single-junction perovskite solar cells. Encapsulated tandem devices retain more than 90% of their initial performance after 600 h of operation at the maximum power point under 1 Sun illumination in ambient conditions.

14 SOLAR ENERGY↗

Prediction of room-temperature half-metallicity in layered halide double perovskites

Half-metallic ferromagnets (HMFs) that possess intriguing physical properties with completely spin-polarized current are key candidates for high-efficiency spintronic devices. However, HMFs that could simultaneously have high Curie temperature ( T c ), wide half-metallic gap (Δ HM ), and large bulk magnetocrystalline anisotropy energy (MAE) are very rare, which significantly restrict their room-temperature (RT) applications. In this article, through materials screening in layered halide double perovskites (LHDPs), we have theoretically identified that Cs 4 FePb 2 Cl 12 , which has good crystallographic, dynamic and thermal stabilities, possesses an intrinsic half-metallic ground-state with a high T c ~ 450 K. Interestingly, the long-range ferromagnetic ordering in bulk Cs 4 FePb 2 Cl 12 is contributed by the strong super-superexchange interactions between the neighboring Fe d orbitals mediated by different anionic Cl p orbitals. The high T c of layered Cs 4 FePb 2 Cl 12 can be well maintained even in the monolayer limitation, i.e., T c ~ 370 K for Cs 4 FePb 2 Cl 12 monolayer, which is critical for nanoscale device applications. Moreover, both bulk and monolayer Cs 4 FePb 2 Cl 12 can exhibit wide Δ HM ~ 0.55 eV and large MAE >320 μeV/Fe, comparable to that of the best HMFs reported in the literature. Our findings can significantly extend the potentials of LHDPs for high-temperature spintronic applications.

36 MATERIALS SCIENCE↗

Solidification Behavior of Calcium Ferrite Under Ultrasonic Vibration

Ultrasonic vibration was applied to the solidification process of calcium ferrite (CF) to modify the grain size and improve the homogeneity of the solidified microstructure. The effects of ultrasound on microstructure, density, compressive strength, and reducibility were studied. The acoustic pressure decreased and then increased along the axis symmetry due to the attenuation of acoustic pressure and reflection of ultrasonic waves in the melt under a fixed power. When the ultrasonic power was increased, the general acoustic pressure increased, which was beneficial to the avoidance of macropores and to improvement of the microstructure. Coarse acicular CF grains were significantly refined; the grain size decreased from 1967 to 442 μm when the ultrasonic power was increased from 0 to 300 W. The density of the samples increased from 4370 to 4680 kg/m{sup 3} due to cavitation and acoustic streaming effects. Ultrasonic vibration greatly improved the ultimate compressive strength of CF; the values were 41.8 ± 2.1 to 67.3 ± 3.4 MPa for ultrasonic powers of 100 to 300 W, respectively. Without ultrasonic treatment, it was only 37.4 ± 1.9 MPa. Ultrasonic vibration also influenced the reduction time of CF due to the composition segregation in the slag during solidification.

36 MATERIALS SCIENCE↗

Transient Interaction Between Reduction and Slagging Reactions of Wustite in Simulated Cohesive Zone of Blast Furnace

The blast furnace cohesive zone plays an important role in the gas flow distribution and heat-transfer efficiency. Previous work mainly employed temperature-based indices to evaluate and predict the shape and thickness of the cohesive zone, whereas the internal reactions and related effects on the softening and melting properties of a complex burden are ignored. In this study, an innovative index, namely, shrinkage rate (SR), is first proposed to directly estimate the shrinkage behavior of wustite (FeO)-packed bed inside a simulated cohesive zone. The index is applied as the temperature increases to elucidate the transient interaction between reduction and slagging reactions. Results show that the thermally induced slagging reaction causes the packed bed to shrink at lower temperature, and the SR doubles when compounds with low melting temperature are generated by adding a reasonable concentration of CaO or SiO{sub 2}. The reduction reaction becomes the driving force during the shrinkage of the packed bed between 1173 K and 1273 K when CO is introduced in the mixture gas. Then, the dominating factors for further shrinkage include slagging, reduction, or both factors. These factors vary with respect to the added compounds or temperature.

36 MATERIALS SCIENCE↗

Solidification of Calcium Ferrite Melt Using Ultrasonic Vibration: Effect and Mechanism

Calcium ferrite (CF) is a very important binder phase in iron ore sintering processes. To improve the microstructure of CF, power ultrasound was introduced during its solidification process, and the effect of immersion depth of ultrasonic probe (IDUP) on the properties of CF was investigated in detail. The results indicated that the microstructure of CF was greatly refined; the grain size decreased from 2864 μm without ultrasonic vibration to 841 μm with ultrasonic vibration at an immersion depth of 30 mm. Without ultrasonic vibration, the density and compressive strength of CF slag were 3904 kg/m{sup 3} and 38.3 MPa, respectively. When the IDUP was increased from 10 to 30 mm, the density and compressive strength of CF increased from 4049 to 4452 kg/m{sup 3} and 52.5 to 87.3 MPa, respectively. Further, the reducibility of CF was examined. The reduction time, at the same reduction rate, decreased from 347 minutes without ultrasonic vibration to 200 minutes with ultrasonic vibration at an IDUP of 30 mm. The rate-limiting step was obviously improved, which may be attributable to the grain refinement of CF and composition segregation in the slag. In general, the properties of CF were greatly improved due to the cavitation and acoustic streaming of ultrasonic waves.

36 MATERIALS SCIENCE↗

Activated mitochondrial apoptosis in hESCs after dissociation involving the PKA/p-p53/Bax signaling pathway

Highlights: • hESC dissociation causes mitochondrial apoptosis. • H89 and Pifithrin α suppress dissociation-induced mitochondrial apoptosis. • PKA/p-p53/Bax signaling pathway is involved in dissociation-induced hESC apoptosis. Human embryonic stem cells (hESCs) are highly fragile with massive cell death after dissociation into single cells, which seriously hampers their applications. The mechanism underlying the massive cell death after dissociation still remains elusive. Here, the expression of apoptosis-related proteins, cell survival and mitochondrial membrane potential in dissociated hESCs before and after the treatments with a protein kinase A (PKA) inhibitor H89 and p53 inhibitor Pifithrin α were investigated, respectively. Protein interactions were identified by immunoprecipitation and immunofluorescence. The results show that the dissociation causes Caspase-dependent apoptosis in hESCs mediated by mitochondrial pathway with the up-regulation of pro-apoptotic proteins, decrease in mitochondrial membrane potential and elevation in pro-apoptotic Cyto c release, which are obviously suppresses by H89. The dissociation-induced increase of phosphorylated p53 Ser15 (p-p53) is suppressed by Pifithrin α which also rescues the elevated levels of pro-apoptotic proteins in mitochondrial pathway. During the dissociation-induced apoptosis, PKA/p-p53/Bax signaling pathway is identified by immunoprecipitation and immunofluorescence showing the most likely interaction between them. These results indicate that dissociation induces mitochondrial apoptosis in hESCs involving PKA/p-p53/Bax signaling pathway, which not only give new insights into the apoptosis mechanism of dissociated hESCs, but also provide clues for developing potential strategies to promote hESC survival after dissociation.

60 APPLIED LIFE SCIENCES↗

Wetting Behavior of Calcium Ferrite Slags on Cristobalite Substrates

Calcium ferrite (CF) is a significant intermediate adhesive phase in high-basicity sinters. The wettability between calcium ferrite (CF) and gangue plays an important role in the assimilation process. The wettability of CF-based slags, in which a constant amount (2 mass pct.) of Al{sub 2}O{sub 3}, MgO, SiO{sub 2}, and TiO{sub 2} was added, on solid SiO{sub 2} (cristobalite) substrates at 1523 K (1250 °C) was investigated. The interfacial microstructure and spreading mechanisms were discussed for each sample. All the tested slag samples exhibited good wettability on the SiO{sub 2} substrate. The initial apparent contact angles were in the range of 20 to 50 deg, while the final apparent contact angles were ~ 5 deg. The wetting process could be divided into three stages on the basis of the change in diameter, namely the “linear spreading” stage, “spreading rate reduction” stage, and “wetting equilibrium” stage. It was found that the CF-SiO{sub 2} wetting system exhibits dissolutive wetting and the dissolution of SiO{sub 2} into slag influences its spreading process. The spreading rate increases with a decrease in the ratio of viscosity to interfacial tension, which is a result of the addition of Al{sub 2}O{sub 3}, MgO, SiO{sub 2}, and TiO{sub 2}. After cooling, a deep corrosion pit was formed in the substrate and a diffusion layer was generated in front of the residual slag zone; further, some SiO{sub 2} and Fe{sub 2}O{sub 3} solid solutions precipitated in the slag.

36 MATERIALS SCIENCE↗

Fasudil inhibits neutrophil-endothelial cell interactions by regulating the expressions of GRP78 and BMPR2

Highlights: • Fasudil suppressed neutrophil-endothelial chemotaxis in a dose-dependent manner. • Fasudil inhibited neutrophil-endothelial chemotaxis via GRP78 down-regulation. • Fasudil attenuated neutrophil-endothelial adhesion by modulating BMPR2 expression. • Fasudil reduced neutrophil transendothelial cell migration. Regulation of leukocyte-endothelial cell interactions and of vascular permeability plays a critical role in the maintenance of functional pulmonary microvascular barriers. Little is yet known about the effect of the Rho-associated protein kinase (ROCK) inhibitor fasudil on leukocyte-endothelial cell interactions or the underlying mechanism. In the present study, as evaluated using co-culture systems of neutrophils and human pulmonary microvascular endothelial cells (HPMECs), fasudil dose-dependently suppressed neutrophil chemotaxis by decreasing the production of chemotactic factors in lipopolysaccharide (LPS)-treated HPMECs. The inhibitory role of fasudil in neutrophil chemotaxis was mediated by down-regulation of the chaperone glucose-regulated protein 78 (GRP78), since the inhibition was abolished by 4-phenyl butyric acid (a chemical chaperone mimicking GRP78). In addition, fasudil inhibited LPS-induced neutrophil-endothelial adhesion by reducing the expression of intercellular adhesion molecule (ICAM)-1. By use of lentiviral transfection in HPMECs, bone morphogenic protein receptor 2 (BMPR2) overexpression suppressed the LPS-induced increase of both ICAM-1 expression and neutrophil-endothelial adhesion, whereas knocking down BMPR2 abolished the inhibitory role of fasudil in both ICAM-1 expression and neutrophil-endothelial adhesion. Moreover, fasudil alleviated LPS-induced hyperpermeability of HPMEC monolayers by leading to the recovery of intercellular junctions, thereafter reduced neutrophil transendothelial cell migration. Therefore, fasudil inhibited leukocyte-endothelial cell interactions and vascular hyperpermeability through modulation of GRP78 and BMPR2 expression, suggesting a potential role for ROCK as a switch for inhibiting leukocyte-endothelial cell interactions.

60 APPLIED LIFE SCIENCES↗