Search NASA⌕ Search

Engineering topics

Xu, Jie

Publications and source records attributed to Xu, Jie.

35 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Hydrogen-Bond-Promoted Planar Conformation, Crystallinity, and Charge Transport in Semiconducting Diazaisoindigo Derivatives

Conformational control of π-conjugated molecules using intramolecular noncovalent bonds represents a promising strategy to tailor the solid-state molecular packing and electronic properties of these materials. Here, we report the design and synthesis of two model compounds featuring intramolecular hydrogen bonds formed between a center diazaisoindigo unit (the acceptor) and flanking indole units (the donor). Computational and experimental investigations show that these hydrogen bonds enthalpically stabilize the coplanar molecular conformation by over 10 kcal/mol. The formation of these hydrogen bonds is also slightly favorable in terms of entropy, ensuring high temperature stability of the planar conformation. In this work, thermal annealing of thin films of these compounds imparts high crystallinity and orientation in the solid state, while the non-hydrogen bond control only gave an amorphous solid. Field-effect transistor devices fabricated from these thin films exhibit hole mobilities up to 0.270 cm 2 V -1 s -1 , in contrast to the lack of measurable charge carrier mobility for the non-hydrogen bond control. This work demonstrates an efficient synthetic strategy to incorporate robust intramolecular hydrogen bonds into conjugated π-systems and elucidates the mechanism on how such hydrogen bonds promote the desired molecular conformation, solid-state packing, and electronic performances of conjugated organic materials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Stretchable Redox‐Active Semiconducting Polymers for High‐Performance Organic Electrochemical Transistors

Abstract Organic electrochemical transistors (OECTs) represent an emerging device platform for next‐generation bioelectronics owing to the uniquely high amplification and sensitivity to biological signals. For achieving seamless tissue–electronics interfaces for accurate signal acquisition, skin‐like softness and stretchability are essential requirements, but they have not yet been imparted onto high‐performance OECTs, largely due to the lack of stretchable redox‐active semiconducting polymers. Here, a stretchable semiconductor is reported for OECT devices, namely poly(2‐(3,3′‐bis(2‐(2‐(2‐methoxyethoxy)ethoxy)ethoxy)‐[2,2′‐bithiophen]‐5)yl thiophene) (p(g2T‐T)), which gives exceptional stretchability over 200% strain and 5000 repeated stretching cycles, together with OECT performance on par with the state‐of‐the‐art. Validated by systematic characterizations and comparisons of different polymers, the key design features of this polymer that enable the combination of high stretchability and high OECT performance are a nonlinear backbone architecture, a moderate side‐chain density, and a sufficiently high molecular weight. Using this highly stretchable polymer semiconductor, an intrinsically stretchable OECT is fabricated with high normalized transconductance (≈223 S cm −1 ) and biaxial stretchability up to 100% strain. Furthermore, on‐skin electrocardiogram (ECG) recording is demonstrated, which combines built‐in amplification and unprecedented skin conformability.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Simultaneous Insight into Dissolution and Aggregation of Metal Sulfide Nanoparticles through Single-Particle Inductively Coupled Plasma Mass Spectrometry

Nanoparticles (NPs) and their colloidal aggregates are ubiquitous and play important roles in the transport and release of metals. Knowledge of their dissolution rates and aggregation behavior in solution are crucial for better prediction of their fate in biogeochemical cycling, ecotoxicity, and environmental remediation. There are however significant technical challenges to accurately obtain such information as a result of the heterogeneity and highly dynamic transformation exhibited by NPs, particularly at relatively low particle concentrations in aqueous systems. Here, we quantitatively examine the simultaneous dissolution and aggregation behavior of metal sulfide NPs using single-particle inductively coupled plasma mass spectrometry (spICP–MS). We focus on nickel sulfide (NiS), with additional data presented for copper sulfide (CuS) and cobalt sulfide (CoS). The kinetics of metal release (dissolution and disaggregation) of NiS was fastest under strongly oxidizing conditions (from 0.04 to >3 min –1 with H 2 O 2 ) and were slower under near-neutral (HEPES buffer/H 2 O) and acidic (1 mM HNO 3 ) conditions (≤0.006 min –1 ). Metal release kinetics in HNO 3 was not faster than in H 2 O or HEPES, suggesting that the solution pH has an influence over both the dissolution kinetics of individual particles and the NP aggregation states, which in combination affect metal release rates over time. Between different metal sulfides, the measured metal release rates were largely consistent with predictions based on the crystallinity, solubility products, and specific surface areas of the NPs, following an order of CoS > NiS > CuS. Here, the spICP–MS approach described here can be easily applied to the characterization of metal release and aggregation of other NPs at low concentrations (~10 5 particles/mL) typically found in natural environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Quaternized chitosan as a biopolymer sanitizer for leafy vegetables: synthesis, characteristics, and traditional vs. dry nano-aerosol applications

A series of quaternary dimethyl-(alkyl)-ammonium chitosan derivatives (QACs) was synthesized and studied for physicochemical properties and bioactivity. The QACs tended to spontaneously self-assembly into nanoaggregates. Antimicrobial activity was examined in vitro on Gram-negative Escherichia coli (E. coli) and Gram-positive Listeria innocua (L. innocua) bacteria as well as phytopathogenic fungus Botrytis cinerea. The hexyl chain-substituted QAC-6 demonstrated the highest potency causing 3.0- and 4.5-log CFU mL-1 reduction of E. coli and L. innocua, respectively. QAC-6 was tested for antimicrobial activity on stainless steel coupons and fresh spinach leaves. A traditional ‘wet’ application (spray) and dry Engineered Water Nanostructure (EWNS) approach were used for spinach decontamination. With both approaches, significant reduction of microbial load on the treated produce was achieved. Finally, the wet application showed a greater reduction of microbial load, while the advantages of EWNS were reaching the antimicrobial effect with miniscule dose of active agent leaving treated surface visibly dry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

A stretchable and strain-unperturbed pressure sensor for motion interference–free tactile monitoring on skins

A stretchable pressure sensor is a necessary tool for perceiving physical interactions that take place on soft/deformable skins present in human bodies, prosthetic limbs, or soft robots. However, all existing types of stretchable pressure sensors have an inherent limitation, which is the interference of stretching with pressure sensing accuracy. Here, we present a design for a highly stretchable and highly sensitive pressure sensor that can provide unaltered sensing performance under stretching, which is realized through the synergistic creations of an ionic capacitive sensing mechanism and a mechanically hierarchical microstructure. Via this optimized structure, our sensor exhibits 98% strain insensitivity up to 50% strain and a low pressure detection limit of 0.2 Pa. With the capability to provide all the desired characteristics for quantitative pressure sensing on a deformable surface, this sensor has been used to realize the accurate sensation of physical interactions on human or soft robotic skin.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Tuning Conjugated Polymer Chain Packing for Stretchable Semiconductors

We report in order to apply polymer semiconductors to stretchable electronics, they need to be easily deformed under strain without being damaged. A small number of conjugated polymers, typically with semicrystalline packing structures, have been reported to exhibit mechanical stretchability. Herein, a method is reported to modify polymer semiconductor packing-structure using a molecular additive, dioctyl phthalate (DOP), which is found to act as a molecular spacer, to be inserted between the amorphous chain networks and disrupt the crystalline packing. As a result, large-crystal growth is suppressed while short-range aggregations of conjugated polymers are promoted, which leads to an improved mechanical stretchability without affecting charge-carrier transport. Due to the reduced conjugated polymer intermolecular interactions, strain-induced chain alignment and crystallization are observed. By adding DOP to a well-known conjugated polymer, poly[2,5-bis(4-decyltetradecyl)pyrrolo[3,4-c]pyrrole-1,4-(2H,5H)-dione-(E)-1,2-di(2,2 '-bithiophen-5-yl)ethene] (DPPTVT), stretchable transistors are obtained with anisotropic charge-carrier mobilities under strain, and stable current output under strain up to 100%.

36 MATERIALS SCIENCE↗
DOE OSTI2021

A critical review of molybdenum sequestration mechanisms under euxinic conditions: Implications for the precision of molybdenum paleoredox proxies

The observed difference in molybdenum (Mo) mobility and isotopic fractionation under oxic versus euxinic (i.e., anoxic and sulfidic) aqueous conditions provides a sound operational basis for the use of Mo geochemical signatures in ancient sedimentary records to infer palaeoceanographic redox conditions. While Mo is known to exist predominantly as molybdate (MoO 4 2– ) in oxic waters and convert into thiomolybdate species (MoO x S 4-x 2– ) under euxinic conditions, the pathways that lead to Mo sequestration are highly debated. As mechanistic understanding of Mo sequestration is crucial for accurately reconstructing the chemistry of ancient oceans and constraining the timing and intensity of oxygenation events through Earth's history using Mo paleoproxies, we have closely examined the current proposed mechanisms for Mo sequestration across a wide range of euxinic conditions. Through compilation and comparison of such information, we aim to provide an integrated view of Mo sequestration processes, to identify the current controversies as well as the roots of such controversies, and importantly, to propose avenues for future research. Here, sequestration of Mo may occur through complexation with organic matter (OM), reactions with oxyhydroxide and sulfide mineral surfaces, incorporation into iron sulfide crystal structures, formation of Mo-sulfide, and cellular assimilation. However, several major questions remains unresolved, including whether OM complexation plays a significant role in overall sedimentary Mo accumulation, whether the reduction of Mo(VI) occurs during interaction with Fe-S clusters/precipitates and/or with OM, whether microbial enzymatic reduction of Mo(VI) is important in Mo sequestration, whether synergistic effects exist between the biological and abiotic processes in Mo sequestration, and whether differences in reactivity among the various thiomolybdate intermediate species and tetrathiomolybdate influence the Mo sequestration process. At the end of the review, the reliability of Mo paleoproxies is discussed and reevaluated.

58 GEOSCIENCES↗
DOE OSTI2021

A universal and facile approach for building multifunctional conjugated polymers for human-integrated electronics

Polymer semiconductors have shown distinct promise for the development of human- integrated electronics, owing to their solution processability and mechanical softness. However, numerous functional properties required for this application domain face synthetic challenges to be imparted onto conjugated polymers and thus combined with efficient charge- transport property. Here, we develop a “click-to-polymer” (CLIP) synthesis strategy for conjugated polymers, which uses a click reaction for the facile and versatile attachment of diverse types of functional units to a pre-synthesized conjugated-polymer precursor. With four types of functional groups, we show that functionalized polymers from this CLIP method can still retain good charge-carrier mobility. Here, we take two realized polymers to showcase the photo-patternable property and biochemical sensing function, both of which advance the state of the art of realizing these two types of functions on conjugated polymers. We expect the expanded use of this synthesis approach can largely enrich the functional properties from conjugated polymers.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Modulating the Surface Ligand Orientation for Stabilized Anionic Redox in Li‐Rich Oxide Cathodes

Abstract Anionic redox chemistry is emerging as a key concept in the development of high‐energy lithium‐ion batteries, as it enables a nearly doubled charge storage capacity, aiding the development of high‐capacity batteries. However, the anionic reactivity is frequently irreversible from charge to discharge, leading to rapid decay of the capacity and voltage of batteries over long‐term cycling. Although the possibility of controlling the anionic redox reactions by tuning the geometric and electronic structures has recently been proposed, the implementation of this strategy is still a critical challenge. Herein, a strategy is proposed to improve the anionic redox reversibility of a model anionic redox active cathode material, Li 1.2 Ni 0.13 Co 0.13 Mn 0.54 O 2 , by tuning the surface ligand geometry via the growth of a lattice‐compatible spinel LiCoO 2 coating layer on the particle surface. Detailed local structure and first principles investigations reveal that the shape and orientation of the octahedral layer in the host lattice are modified. Accordingly, a two‐band oxygen redox behavior is triggered in the ligand‐orientation‐regulated Li‐rich cathode, leading to enhanced reversibility, and thus, remarkably improved capacity and voltage retention over cycling. This study highlights the importance of controllable ligand orientation, carving a new path for the development and design of Li‐rich cathodes in the future.

Liu, Yanchen↗
DOE OSTI2021

Observation of Stepwise Ultrafast Crystallization Kinetics of Donor–Acceptor Conjugated Polymers and Correlation with Field Effect Mobility

The semicrystalline microstructures of donor-acceptor conjugated polymers strongly impact their optoelectronic properties. The control of the microstructure relies on the understandings of the crystallization processes in these polymers, from packing structures to crystallization kinetics. How fast these conjugated polymer chains crystallize and how their chemical structures and pre-existing microstructure history influence their crystallization have so far remained unclear, due to the fast crystallization rate caused by chain rigid structures and strong interactions. Here, ultrafast scanning calorimetry (FSC) is employed to reveal the crystallization behaviors of high perform- ance diketopyrrolopyrrole (DPP)-based conjugated polymers with scanning rates up to 500 000 K/s. Through elaborately designed nonisothermal and isothermal crystallization studies, we probed the fast crystallization kinetics and extracted the two-step crystallization process of these polymers quantitatively. We found that both the rigidity of the chain backbones and the preinduced crystalline microstructures can influence the crystallization rate over an order of magnitude at the same degree of undercooling. We further demonstrated the manipulated crystallization kinetics in the DPP-based polymer films with different amounts of preinduced crystallites and correlate it to the polymers’ charge transport mobility.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Strain-insensitive intrinsically stretchable transistors and circuits

An all-elastomer strain engineering approach, which uses patterned elastomer layers with tunable stiffnesses, can be used to create intrinsically stretchable transistor arrays with a device density of 340 transistors cm -2 and strain insensitivity of less than 5% performance variation when stretched to 100% strain. Intrinsically stretchable electronics can form intimate interfaces with the human body, creating devices that could be used to monitor physiological signals without constraining movement. However, mechanical strain invariably leads to the degradation of the electronic properties of the devices. Here we show that strain-insensitive intrinsically stretchable transistor arrays can be created using an all-elastomer strain engineering approach, in which the patterned elastomer layers with tunable stiffnesses are incorporated into the transistor structure. By varying the cross-linking density of the elastomers, areas of increased local stiffness are introduced, reducing strain on the active regions of the devices. This approach can be readily incorporated into existing fabrication processes, and we use it to create arrays with a device density of 340 transistors cm -2 and a strain insensitivity of less than 5% performance variation when stretched to 100% strain. We also show that it can be used to fabricate strain-insensitive circuit elements, including NOR gates, ring oscillators and high-gain amplifiers for the stable monitoring of electrophysiological signals.

42 ENGINEERING↗
DOE OSTI2021

Metal–Ligand Based Mechanophores Enhance Both Mechanical Robustness and Electronic Performance of Polymer Semiconductors

The backbone of diketopyrrolopyrrole-thiophene-vinylene-thiophene-based polymer semiconductors (PSCs) is modified with pyridine (Py) or bipyridine ligands to complex Fe(II) metal centers, allowing the metal–ligand complexes to act as mechanophores and dynamically crosslink the polymer chains. Here, mono- and bi-dentate ligands are observed to exhibit different degrees of bond strengths, which subsequently affect the mechanical properties of these Wolf-type-II metallopolymers. The counter ion also plays a crucial role, as it is observed that Py-Fe mechanophores with non-coordinating BPh 4 – counter ions (Py-FeB) exhibit better thin film ductility with lower elastic modulus, as compared to the coordinating chloro ligands (Py-FeC). Interestingly, besides mechanical robustness, the electrical charge carrier mobility can also be enhanced concurrently when incorporating Py-FeB mechanophores in PSCs. This is a unique observation among stretchable PSCs, especially that most reports to date describe a decreased mobility when the stretchability is improved. Next, it is determined that improvements to both mobility and stretchability are correlated to the solid-state molecular ordering and dynamics of coordination bonds under strain, as elucidated via techniques of grazing-incidence X-ray diffraction and X-ray absorption spectroscopy techniques, respectively. This study provides a viable approach to enhance both the mechanical and the electronic performance of polymer-based soft devices.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Mitigating Cascading Outages in Severe Weather Using Simulation-Based Optimization

Severe weather events can trigger cascading power outages and lead to significant losses. In this work, we investigate cascading outage mitigation under severe weather conditions. Given day-ahead weather forecasts and component failure models, we aim to identify a set of power lines that can be hardened to minimize the expected impact of potential cascading outages. Since the expected load shedding cannot be expressed as an explicit function of line hardening decisions and system states, we developed a cascading outage simulator to estimate the expected value of load shedding under various initial weather-related disruption scenarios generated using a weather forecast. To avoid massive enumeration of all possible combinations of line hardening decisions and reduce the simulation efforts, we employed an efficient simulation-based optimization approach that quickly identifies the (near) optimal line hardening decisions in the presence of both large simulation noises due to the highly variable initial disturbances and system states, and significant randomness in the subsequent cascades. Furthermore, the algorithm is also able to utilize parallel computing to dramatically reduce computation time to support decision making in preparation for severe weather conditions. We performed a case study on the Northeast Power Coordinating Council (NPCC) 140-bus system model to demonstrate that our approach can significantly improve power grid resilience to adverse weather events.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2020

Multiamorphous Phases in Diketopyrrolopyrrole-Based Conjugated Polymers: From Bulk to Ultrathin Films

The glass transition temperature (T g ) of conjugated polymers is a crucial physical parameter that governs their mechanical and electrical properties for applications from sensor technology to skin-like electronics. Despite some well-developed methods that exist for detecting T g of conjugated polymers, there is still a need for the combination of advanced calorimetric methodologies to characterize T g in a broad range of temperatures and scales from bulk to nanometer-thin films. In this work, alternating current (ac) chip calorimetry and flash differential scanning calorimetry (flash DSC) are applied to successfully identify the Tgs and segmental relaxations of conjugated polymers. The detected relaxations were interpreted, in agreement with existing observations in similar systems, as a side-chain relaxation (low temperature), mobile amorphous fractions (MAF), and rigid amorphous fractions (RAF). T g s of MAF and RAF increase and decrease with increasing size of fused thiophene units in the backbone, respectively. The T g s of diketopyrrolopyrrole-based conjugated polymer thin films are also identified by the same method, with both T g s showing a decreased value compared to those of bulk samples. Furthermore, the weight fractions of MAF and RAF with various film thicknesses are qualitatively analyzed based on the heat capacity step of each amorphous fraction during the glass transition. This facile method gives insights into the physical nature of amorphous phases in conjugated polymers for better revealing their structure-property relationships, which will guide the designs of new materials with optimized electrical and mechanical properties in the future.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Insights into the Biogeochemical Cycling of Cobalt: Precipitation and Transformation of Cobalt Sulfide Nanoparticles under Low-Temperature Aqueous Conditions

Cobalt sulfide precipitates, key phases in the natural biogeochemical cycling of cobalt and in relevant remediation and resource recovery processes, remain poorly defined under low-temperature aqueous conditions. Here, we systematically studied the Co-(Fe) sulfides precipitated and aged in environmentally relevant solutions, defined by different combinations of pH, initial cobalt-to-iron ratios ([Co] aq /[Fe] aq ), with/without S 0 , and the presence/absence of sulfate-reducing bacteria. The initial abiogenic precipitates without Fe aq were composed exclusively of amorphous Co-sulfide hydrates (CoS· x H 2 O), whose estimated log K* was three orders of magnitude higher than that previously reported for crystalline Co-sulfides. The addition of S 0 , in combination with acidic pH and elevated temperature (60°C), resulted in the recrystallization of the amorphous precipitates into nanocrystalline jaipurite (hexagonal CoS) within one month (which otherwise remained stable for up to two months). In the presence of Fe(II) aq , the abiogenic precipitates were composed of more crystalline Co-sulfide hydrates and/or Co-rich mackinawite, the exact phase being dependent on the specific [Co] aq /[Fe(II)] aq . The biogenic precipitates displayed higher crystallinity for Co sulfides (up to the formation of nanocrystalline cobalt pentlandite, Co 9 S 8 ) and lower crystallinity for Co-rich mackinawite, suggestive of mineral-specific bacterial interaction. The revealed precipitation and transformation pathways of Co-(Fe-)sulfides in this study allows for predicting the prevalent Co-bearing phases in various natural and engineered environments.

58 GEOSCIENCES↗