Near-T vortex pinning and Dew–Hughes scaling in CaK(Fe1−xNix)4As4 and Ba(Fe1−xCox)2As2 single crystals
Explore the source record for details and available documents.
Haberkorn, N. (ORCID:0000000252611642)↗
Engineering topics
Xu, M.
Publications and source records attributed to Xu, M..
Understanding vortex dynamics in CaK(Fe,Ni) 4 As 4 and Ba(Fe,Co) 2 As 2 single crystals under the influence of random point disorder
We report on the influence of doping on vortex dynamics in 3 MeV proton-irradiated single crystals of CaK(Fe 1–x Ni x ) 4 As 4 (1144, x = 0.015, 0.025, and 0.03) and Ba(Fe 1–x Co x ) 2 As 2 (x = 0.04, 0.062, 0.066 and 0.074). Non-irradiated crystals of the 1144 system display superconducting critical temperatures ranging from 31 K for x = 0.015–20.5 K, as doping increases to 0.03. On the other hand, pristine crystals of the 122 system show T c values between 14.6 and 23.6 K, with the maximum T c occurring at intermediate doping levels. The fluence was set at 3 × 10 16 p cm –2 , resulting in a decrease in the T c by around 1.5 K for all samples and significantly affecting the vortex dynamics by reducing the flux creep relaxation compared to previously reported values for unirradiated crystals. Parameters such as vortex pinning energy U 0 and the glassy exponent μ dependencies on doping and magnetic field strength are identified. For the 1144 system, U 0 reaches values approaching 500 K for small fields in samples with T c = 29.3 K (x = 0.015), systematically decreasing to around 200 K as T c falls below 20 K. Furthermore, U 0 decreases as the field increases to 3 T for the same sample, varying from approximately 250 K to 100 K as T c decreases. These changes are typically accompanied by modifications in μ, gradually increasing from values around 1 towards 1.5, corresponding to small bundle relaxation in the collective creep theory. Despite differences in the substitutional disorder and magnetic phase diagram with respect to the 1144 system, the results for 122 single crystals follow a similar tendency in which U 0 usually reduces and μ increase rise as the applied magnetic field is increased. Due to moderate U 0 in these systems (few hundreds of kelvins), the resulting decay of persistent current at liquid helium temperatures is primarily determined by a balance between U 0 and bundle size contribution. Furthermore, these findings provide valuable insights for potential applications of these systems, particularly in the context of intrinsic superconducting parameters and the resulting pinning landscape.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Recent advance progress of HL-3 experiments
Since the first plasma realized in 2020, a series of key systems on HL-3 (known as HL-2M before) tokamak have been equipped/upgraded, including in-vessel components (the first wall, lower divertor, and toroidal cryogenic/water-cooling/baking/glow discharge systems, etc.), auxiliary heating system of 11 MW, and 28 diagnostic systems (to measure the plasma density, electron temperature, radiation, magnetic field, etc.). Magnet field systems were commissioned firstly for divertor plasma discharges. During the 2nd experimental campaign of HL-3 tokamak, several great progresses have been achieved. Firstly, the successful operation with plasma current larger than 1 MA was achieved under a divertor configuration. Secondly, the advanced divertor concept with two distinct snowflake configurations was realized. It is found that the distribution of ion saturation current and heat flux on bottom plate becomes wide due to magnetic surface expansion, demonstrating the advantage of such configuration in the heat flux mitigation. In addition, using the combination of NBI, ECRH and LHCD, the standard sawtoothing high confinement mode of megampere plasma was firstly accessed on the HL-3. The successful commissioning of HL-3 is beneficial for the initial operation of ITER.
1 MA plasma↗
Cryogenic aspects of a 20 MW class low-temperature superconducting generator for the renewables industry
In this paper we give a progress update on the cryogenic design for cooling a 20 MW class, partially superconducting generator with stationary field coils for offshore wind renewables industry [1-2]. This is a continuation of an earlier program on a 10 MW system dating back ten years. Whereas this new power rating increase leads to a radial diameter expansion of the superconducting field coils from 4 to > 9.5 m, it maintains the axial length. We show the design based on this scaled up with enlarged diameter. The field coil size increase asks for higher cooling power that leads to a bigger cold box size to accommodate the cryocoolers. In the design, as many as 8 cryocoolers can be accessed and serviced from the nacelle that houses the main cryogenic components. A typical thermal load balance sheet with all components is given and compared against the available cryocooler cooling power at different operating conditions. Due to the cryocoolers’ local point of contact cooling within the nacelle, the temperature gradient of the thermal shield that fully encloses the cold mass with its embedded field coils needs to be balanced out to minimize the heat burden on the field coils. This requires additional analytical efforts and implementation of further design features. The extended nacelle houses the cold box with its cryogenic infrastructure. The interface for the envisaged cryogenic pushbutton closed-loop circulating system remains invisible, requires no handling of cryogenic liquids and is hermetically closed. The field coil diameter increase also leads to a greater initial helium gas storage volume. In addition, it requires higher initial room temperature fill pressure within the toroidal helium vapor storage tanks and in cooling tubes connecting to the cryocoolers. The toroidal helium gas tanks are thermally coupled with the thermal shield so that helium convection inside the storage tank can improve heat transfer and reduce the temperature gradient of the thermal shield. Besides those heat transfer challenges, additional mechanical strain within this large structure is exerted on the torque tubes during initial cooldown and when energizing field coils. Some of those design challenges are quite unexpected, leading to novel workarounds in order to maintain the chosen cooling strategy. Finally, we assess those design limitations in view of further cryogenic scalability with emphasis on manufacturability and assembly.
cryogenics↗
How turbulent transport broadens the heat flux width: local SOL production or edge turbulence spreading?
This paper uses data from limited HL-2A Ohmic-plasma to answer the question of how turbulent transport broadens the heat flux width. A key issue in this study is the determination of the origin of scrape-off layer (SOL) turbulence. We develop the concept of the energy production ratio ${R_a}$, which compares the flux of turbulence energy across the last closed flux surface (LCFS) to the net, integrated energy production in the SOL. The flux of turbulence energy (i.e. spreading) is measured directly, using Langmuir probes. Experimental data is used to evaluate ${R_a}$. Results show that usually ${R_a} > 1$, indicating that SOL turbulence is energized primarily by edge turbulence spreading. The exceptions—cases where ${R_a} < 1$—are those with relatively stronger ${\mathbf{E}} \times {\mathbf{B}}$ shear near the LCFS. The latter inhibits both turbulence spreading and local SOL production, but has greater effects on spreading. High blob fraction in the turbulence correlates with large values of ${R_a}$. The implications for heat flux width physics are discussed.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Effect of resonant magnetic perturbations including toroidal sidebands on magnetic footprints and fast ion losses in HL-2M
Externally applied resonant magnetic perturbations (RMPs), generated by magnetic coils located outside the plasma (referred to as RMP coils), provide an effective way to control the edge localized mode (ELM) in tokamak devices. Due to the discrete nature of the toroidal distribution of these window-frame coils, toroidal sidebands always exist together with the fundamental harmonics designed for ELM control. In this work, the MARS-F code (Liu et al 2000 Phys. Plasmas7 3681) is applied to investigate the detailed features of the RMP spectra considering both the dominant harmonic (n = 2) and the associated sideband (n = 6), and the impact of the combined fields on magnetic footprints as well as on the fast ion losses for a reference double-null scenario in the HL-2M device. It is found that the sum of the n = 2 and n = 6 RMP fields splits the footprint and widens the footprint area, as compared to the single-n (n = 2) harmonic case. The resistive plasma response breaks the up–down symmetry of the footprint pattern on the outer divertor plates, which is otherwise symmetric assuming vacuum RMP fields. Considering fast ion losses, a threshold value exists for the initially launched radial position of test particles, as well as for the RMP coil current, before the loss occurs. When the threshold criterion is satisfied, the combined n = 2 and n = 6 RMP fields enhance the fast ion loss rate by , as compared to that of the n = 2 component alone. These results illustrate the important role of the sideband of RMP fields on the magnetic footprints and fast ion losses in tokamak plasmas.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Antiferromagnetic order and its interplay with superconductivity in CaK(Fe$_{1-x}$Mn$_x$) 4 As 4
The magnetic order for several compositions of CaK(Fe$_{1-x}$Mn$_x$) 4 As 4 has been studied by nuclear magnetic resonance (NMR), Mössbauer spectroscopy, and neutron diffraction. Our observations for the Mn-doped 1144 compound are consistent with the hedgehog spin vortex crystal (hSVC) order which has previously been found for Ni-doped CaKFe 4 As 4 . The hSVC state is characterized by the stripe-type propagation vectors $(\pi\,0)$ and $(0\,\pi)$ just as in the doped 122 compounds. The hSVC state preserves tetragonal symmetry at the Fe site, and only this SVC motif with simple antiferromagnetic (AFM) stacking along $\ c$ is consistent with all our observations using NMR Mössbauer spectroscopy, and neutron diffraction. We find that the hSVC state in the Mn-doped 1144 compound coexists with superconductivity (SC), and by combining the neutron scattering and Mössbauer spectroscopy data we can infer a quantum phase transition, hidden under the superconducting dome, associated with the suppression of the AFM transition temperature ($T_N$) to zero for $x$ ≈ 0.01. In addition, unlike several 122 compounds and Ni-doped 1144, the ordered magnetic moment is not observed to decrease at temperatures below the superconducting transition temperature ($T_c$).
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Toroidal modeling of plasma flow damping and density pump-out by RMP during ELM mitigation in HL-2A
Reduction of both the plasma density and toroidal flow speed, due to application of the predominantly n = 1 (n is the toroidal mode number) resonant magnetic perturbation (RMP) for controlling the edge localized mode in the HL-2A tokamak, is numerically investigated utilizing the quasi-linear initial-value code MARS-Q (Liu et al 2013 Phys. Plasmas 20 042503). Simulation results reveal that the neoclassical toroidal viscosity (NTV) due to three dimensional fields plays the key role in modifying the plasma momentum and particle transport in the HL-2A discharge. By comparing the modeling results with the measured density pump-out in the experiment, the electron NTV particle flux model, in combination with the free-boundary condition for the axisymmetric change of the density at the plasma edge, is found to yield the best agreement in terms of both the pump-out level and the overall time scale. Further sensitivity studies show that the simulated density pump-out level is reasonably robust against variations in the model assumptions, including the particle diffusion model and the non-ambipolar versus ambipolar NTV particle flux. The latter however affects the time scale for reaching the steady state solution. Finally, it is found that the plasma edge-peeling response, the NTV torque, as well as the plasma momentum and particle transport, all are sensitive to the toroidal phase difference between the upper and lower rows of the RMP coil currents in HL-2A, with the 30 ∘ coil phasing producing the minimal side effects on the plasma.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Summary report of the 4th IAEA Technical Meeting on Fusion Data Processing, Validation and Analysis (FDPVA)
The objective of the Fourth Technical Meeting on Fusion Data Processing, Validation and Analysis was to provide a platform during which a set of topics relevant to fusion data processing, validation and analysis are discussed with the view of extrapolating needs to next step fusion devices such as ITER. The validation and analysis of experimental data obtained from diagnostics used to characterize fusion plasmas are crucial for a knowledge-based understanding of the physical processes governing the dynamics of these plasmas. This paper presents the recent progress and achievements in the domain of plasma diagnostics and synthetic diagnostics data analysis (including image processing, regression analysis, inverse problems, deep learning, machine learning, big data and physics-based models for control) reported at the meeting. The progress in these areas highlight trends observed in current major fusion confinement devices. A special focus is dedicated on data analysis requirements for ITER and DEMO with a particular attention paid to artificial intelligence for automatization and improving reliability of control processes.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Toroidal modeling of 3D perturbations generated by current filaments in scrape-off layer in tokamak with biased divertor targets
The divertor biasing technique offers a promising alternative to control the edge localized mode (ELM) as well as the divertor heat load in tokamaks, as compared to the resonant magnetic perturbation (RMP) generated by magnetic coils. The linear resistive MHD code MARS-F (Liu et al 2000 Phys. Plasmas 7 3681) is employed to study the plasma response to the n = 2 (n is the toroidal mode number) field perturbation in HL-2A, produced by the divertor biasing current filaments flowing in the scrape-off layer region. The response field due to biasing currents is compared with the RMP field utilized for ELM control in HL-2A. The strength of the radial resonant field perturbation, produced by the biasing currents of 100 A level, is found to be comparable with RMP generated by several kA of ELM control coil currents for the reference plasma. The plasma normal displacement near the X-point and the associated neoclassical toroidal viscosity torque are also computed to be similar between these two techniques. The modeling results thus strongly suggest that the biasing technique can be applied to control ELMs. Moreover, the biasing currents produce field perturbations, including the plasma response, that are localized more near the plasma edge (compared to the RMP counterpart), thus reducing the chance of mode locking associated with core perturbations. Particle orbit tracing also reveals that the biasing current produced magnetic perturbation tends to widen the heat deposition region and induce the strike point splitting of the ion saturation flow on the outer divertor surface, consistent with experimental observations in HL-2A. These toroidal modeling results confirm the possibility of ELM control and plasma exhaust solution by the divertor biasing technique.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Strong band renormalization and emergent ferromagnetism induced by electron-antiferromagnetic-magnon coupling
The interactions between electrons and antiferromagnetic magnons (AFMMs) are important for a large class of correlated materials. For example, they are the most plausible pairing glues in high-temperature superconductors, such as cuprates and iron-based superconductors. However, unlike electron-phonon interactions (EPIs), clear-cut observations regarding how electron-AFMM interactions (EAIs) affect the band structure are still lacking. Consequently, critical information on the EAIs, such as its strength and doping dependence, remains elusive. Here we directly observe that EAIs induce a kink structure in the band dispersion of Ba 1–x K x Mn 2 As 2 , and subsequently unveil several key characteristics of EAIs. We found that the coupling constant of EAIs can be as large as 5.4, and it shows strong doping dependence and temperature dependence, all in stark contrast to the behaviors of EPIs. The colossal renormalization of electron bands by EAIs enhances the density of states at Fermi energy, which is likely driving the emergent ferromagnetic state in Ba 1–x K x Mn 2 As 2 through a Stoner-like mechanism with mixed itinerant-local character. Our results expand the current knowledge of EAIs, which may facilitate the further understanding of many correlated materials where EAIs play a critical role.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
GeoSoilEnviroCARS (Sector 13) at the Advanced Photon Source: a comprehensive synchrotron radiation facility for Earth science research at ambient and extreme conditions
GeoSoilEnviroCARS (GSECARS) is a comprehensive analytical laboratory for Earth and environmental science research using X-ray beams from the Advanced Photon Source, Argonne National Laboratory. State-of-the-art instruments are available for (1) high-pressure/high- or low-temperature diffraction, total scattering, and spectroscopy (Brillouin, Raman, and VIS-IR) using the laser heated diamond anvil cell (DAC); (2) high-pressure/high-temperature diffraction, scattering, and imaging as well as acoustic emission (AE) and ultrasonics using the large-volume press (LVP); (3) powder, single crystal, and surface/interface diffraction; (4) X-ray absorption fine structure spectroscopy; (5) X-ray fluorescence microprobe analysis; and (6) microtomography. As shown here, experiments are facilitated by senior level staff who collaborate on all aspects of the analytical work including experiment design, sample preparation, data collection, data interpretation, and publication preparation. Both technical and scientific synergies occur as a result of the intimate association of the various techniques and scientists experienced in the applications of synchrotron radiation to Earth, environmental, and planetary science problems. The facility includes state-of-the-art instrumentation designed and built in-house, including custom X-ray optics, online and offline laser-based systems, specialized sample environments and positioning systems, as well as pixel-array and multi-crystal energy dispersive X-ray detectors, which are available to be shared among the experimental stations.
36 MATERIALS SCIENCE↗
Superconductivity and phase diagrams of CaK(Fe 1- x Mn x ) 4 As 4 single crystals
In order to study the effects of Mn substitution on the superconducting and magnetic ground state of CaKFe 4 As 4 (T c = 35 K), members of the CaK (Fe 1–x Mn x ) 4 As 4 series have been synthesized by high-temperature solution growth in single-crystalline form and characterized by elemental analysis, thermodynamic, and transport measurements. These measurements show that the superconducting transition temperature decreases monotonically and is finally suppressed below 1.8 K as x is increased from 0 to 0.036. For x values greater than 0.016, signatures of a magnetic transition can be detected in both thermodynamic and transport measurements in which kinklike features allow for the determination of the transition temperature T* that increases as Mn substitution increases. Here, a temperature-composition (T–x) phase diagram is constructed, revealing a half-dome of superconductivity with the magnetic transition temperature T* appearing near 26 K for x ~ 0.017 and rising slowly up to 33 K for x ~ 0.036. In addition to the creation of the T–x phase diagram for CaK(Fe 1–x Mn x ) 4 As 4 , specific-heat data are used to track the jump in specific heat at T c ; the CaK(Fe 1–x Mn x ) 4 As 4 data do not follow the scaling of ΔC p with $T$$^{3}_{c}$ as many of the other Fe-based superconducting systems do. These data suggest that, as magnetic pair breaking is present, the jump in C p for a given T c is reduced. Elastoresistivity coefficients 2m 66 and m 11 – m 12 as a function of temperature are also measured. 2m 66 and m 11 – m 12 are qualitatively similar to CaK(Fe 1–x Ni x ) 4 As 4 . This may indicate that the magnetic order in Mn-substituted system may be still the same as CaK(Fe 1–x Mn x ) 4 As 4 . Superconductivity of CaK(Fe 1–x Mn x ) 4 As 4 is also studied as a function of magnetic field. A clear change in H' c2 (T)/T c , where H' c2 (T) is dH' c2 (T)/dT, at x ~ 0.015 is observed and probably is related to change of the Fermi surface due to magnetic order. Coherence lengths and the London penetration depths are also calculated based on H c1 and H c2 data. Coherence lengths as the function of x also show the changes near x = 0.015, again consistent with Fermi-surface changes associated with the magnetic ordering seen for higher-x values.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Electrode biasing maintains the edge shear layer at high density in the J-TEXT tokamak
Collapse of the edge flow shear as the line-averaged density approaches the Greenwald density limit has been observed as a precursor to the enhanced edge particle flux characteristic of proximity to the density limit regime. Here, we report the use of a biased electrode to sustain the edge shear layer in high density discharges, in which the shear layer would otherwise collapse. A stable increase in line-averaged density is observed along with a strong increase in edge density. These experiments were carried out on the J-TEXT tokamak. The Reynolds stress at the edge is enhanced, and the zonal flow sustained, while density perturbation levels, the flux of turbulence internal energy (i.e., turbulence spreading), and particle and heat flux all decrease significantly. Electron adiabaticity increases, and bias voltage modulation experiments show that an increase in the edge shear leads the increase in adiabaticity. Furthermore, these results suggest that external edge E × B flow shear drive may be of interest for sustaining edge plasma states at high density, and support the hypothesis that collapse of the edge shear layer triggers the onset of the strong transport and turbulence characteristic of the density limit regime.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Neural network based fast prediction of β N limits in HL-2M
Artificial neural networks (NNs) are trained, based on the numerical database, to predict the no-wall and ideal-wall β N limits, due to onset of the n = 1 ( n is the toroidal mode number) ideal external kink instability, for the HL-2M tokamak. The database is constructed by toroidal computations utilizing both the equilibrium code CHEASE (Lütjens et al 1992 Comput. Phys. Commun. 69 287) and the stability code MARS-F (Liu et al 2000 Phys. Plasmas 7 3681). The stability results show that (1) the plasma elongation generally enhances both β N limits, for either positive or negative triangularity plasmas; (2) the effect is more pronounced for positive triangularity plasmas; (3) the computed no-wall β N limit linearly scales with the plasma internal inductance, with the proportionality coefficient ranging between 1 and 5 for HL-2M; (4) the no-wall limit substantially decreases with increasing pressure peaking factor. Furthermore, both the NN model and the convolutional neural network (CNN) model are trained and tested, producing consistent results. The trained NNs predict both the no-wall and ideal-wall limits with as high as 95% accuracy, compared to those directly computed by the stability code. Additional test cases, produced by the Tokamak Simulation Code (Jardin et al 1993 Nucl. Fusion 33 371), also show reasonable performance of the trained NNs, with the relative error being within 10%. The constructed database provides effective references for the future HL-2M operations. The trained NNs can be used as a real-time monitor for disruption prevention in the HL-2M experiments, or serve as part of the integrated modeling tools for ideal kink stability analysis.
Physics↗
Enhanced particle transport events approaching the density limit of the J-TEXT tokamak
Enhanced particle transport events are discovered and analyzed as the density limit of the J-TEXT tokamak is approached. Edge shear layer collapse is observed and the ratio of Reynolds power to turbulence production decreases. Simultaneously, the divergence of turbulence internal energy flux (i.e. turbulence spreading) increases, indicating that shear layer collapse triggers an outward spreading event. Studies of correlations show that the enhanced particle transport events are quasi-coherent, and manifested primarily in density fluctuations which exhibit positive skewness. Furthermore, electron adiabaticity emerges as the critical parameter which signals transport event onset. For α < 0.35 as density approaches the Greenwald density, both turbulence spreading and density fluctuations rise rapidly. Taken together, these results elucidate the connections between edge shear layer, density fluctuations, particle transport events, turbulence spreading and plasma edge cooling as the density limit is approached.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Substantial reduction of the anisotropy in the critical current densities J c of Ni-doped CaKFe 4 As 4 single crystals by chemical and irradiation-induced disorder
Here, we demonstrate that the anisotropy in the critical current densities, J c , of CaK(Fe 1–x Ni x ) 4 As 4 (x = 0, 0.015, 0.025, and 0.030) single crystals reduces with increasing chemical and irradiation-induced disorder. The magnetic field dependences of J c are analyzed by performing magnetization measurements with H applied parallel and perpendicular to the crystallographic c-axis. The results show that undoped crystals display large anisotropies in Jc due to an enhancement of the vortex pinning with H applied parallel to the crystallographic ab-planes. This anisotropy reduces substantially as Ni addition increases. Moreover, we found that random disorder introduced by proton irradiation enhances mainly the vortex pinning for H parallel to the c-axis. Consequently, using adequate fluencies, the vortex pinning at low temperatures in both undoped and doped samples becomes close to isotropic. These results make the CaKFe 4 As 4 system promising for applications that require isotropic J c under magnetic fields.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗