Search NASA⌕ Search

Engineering topics

Xu, Xiaoshan

Publications and source records attributed to Xu, Xiaoshan.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Microstructural Underpinnings of Giant Intrinsic Exchange Bias in Epitaxial NiCo 2 O 4 Thin Films

Understanding intrinsic exchange bias in nominally single-component ferromagnetic or ferrimagnetic materials is crucial for simplifying related device architectures. However, the mechanisms behind this phenomenon and its tunability remain elusive, which hinders the efforts to achieve unidirectional magnetization for widespread applications. Inspired by the high tunability of ferrimagnetic inverse spinel NiCo 2 O 4 , the origin of intrinsic exchange bias in NiCo 2 O 4 (111) films deposited on Al 2 O 3 (0001) substrates are investigated. The comprehensive characterizations, including electron diffraction, X-ray reflectometry and spectroscopy, and polarized neutron reflectometry, reveal that intrinsic exchange bias in NiCo 2 O 4 (111)/Al 2 O 3 (0001) arises from a reconstructed antiferromagnetic rock-salt Ni x Co 1-x O layer at the interface between the film and the substrate due to a significant structural mismatch. Remarkably, by engineering the interfacial structure under optimal growth conditions, it can achieve exchange bias larger than coercivity, leading to unidirectional magnetization. Such giant intrinsic exchange bias can be utilized for realistic device applications. This work establishes a new material platform based on NiCo 2 O 4 , an emergent spintronics material, to study tunable interfacial magnetic and spintronic properties.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Colossal Strain Tuning of Ferroelectric Transitions in KNbO 3 Thin Films

Strong coupling between polarization ( P ) and strain (ɛ) in ferroelectric complex oxides offers unique opportunities to dramatically tune their properties. Here colossal strain tuning of ferroelectricity in epitaxial KNbO 3 thin films grown by sub‐oxide molecular beam epitaxy is demonstrated. While bulk KNbO 3 exhibits three ferroelectric transitions and a Curie temperature ( T c ) of ≈676 K, phase‐field modeling predicts that a biaxial strain of as little as −0.6% pushes its T c > 975 K, its decomposition temperature in air, and for −1.4% strain, to T c > 1325 K, its melting point. Furthermore, a strain of −1.5% can stabilize a single phase throughout the entire temperature range of its stability. A combination of temperature‐dependent second harmonic generation measurements, synchrotron‐based X‐ray reciprocal space mapping, ferroelectric measurements, and transmission electron microscopy reveal a single tetragonal phase from 10 K to 975 K, an enhancement of ≈46% in the tetragonal phase remanent polarization ( P r ), and a ≈200% enhancement in its optical second harmonic generation coefficients over bulk values. These properties in a lead‐free system, but with properties comparable or superior to lead‐based systems, make it an attractive candidate for applications ranging from high‐temperature ferroelectric memory to cryogenic temperature quantum computing.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Intrinsic exchange bias from interfacial reconstruction in an epitaxial Ni x Co y Fe 3– x – y O 4 (111)/α-Al 2 O 3 (0001) thin film family

Intrinsic exchange bias is known as the unidirectional exchange anisotropy that emerges in a nominally single-component ferro-(ferri-)magnetic system. In this work, with magnetic and structural characterizations, we demonstrate that intrinsic exchange bias is a general phenomenon in (Ni, Co, Fe)-based spinel oxide films deposited on α-Al 2 O 3 (0001) substrates, due to the emergence of a rock-salt interfacial layer consisting of antiferromagnetic CoO from interfacial reconstruction. We show that in Ni x Co y Fe 3–x–y O 4 (111)/α-Al 2 O 3 (0001) films, intrinsic exchange bias and interfacial reconstruction have consistent dependences on Co concentration y, while the Ni and Fe concentration appears to be less important. This work establishes a family of intrinsic exchange bias materials with great tunability by stoichiometry and highlights the strategy of interface engineering in controlling material functionalities.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Spherulite-enhanced macroscopic polarization in molecular ferroelectric films from vacuum deposition

Proton-transfer type molecular ferroelectrics hold significant promise for practical application due to their large spontaneous polarizations, high Curie temperatures, and small switching fields. However, it remains puzzling that preparation of quasi-2D films exhibiting macroscopic ferroelectric behaviors has been reported in only few molecular ferroelectrics. To address this puzzle, we studied the impact of microstructures on the macroscopic ferroelectric properties of 5,6-dichloro-2-methylbenzimidazole (DC-MBI) films grown using the low-temperature deposition followed by the restrained crystallization (LDRC) method. Our findings revealed a competition between dense spherulites and porous microstructures containing randomly oriented nanograins in the as-grown films. Post-growth annealing at moderate temperature promotes the formation of spherulites, leading to macroscopic ferroelectric polarization switching. These results underscore the critical role of microstructure density in determining macroscopic ferroelectric properties, potentially resolving the puzzle for the absence of such behavior in many molecular ferroelectric films. Here, we anticipate that the approach proposed in this study to enhance microstructure density will significantly advance the fabrication of quasi-2D molecular ferroelectric films and unlock their potential in device applications.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Hydrogen-induced tunable remanent polarization in a perovskite nickelate

Materials with field-tunable polarization are of broad interest to condensed matter sciences and solid-state device technologies. Here, using hydrogen (H) donor doping, we modify the room temperature metallic phase of a perovskite nickelate NdNiO 3 into an insulating phase with both metastable dipolar polarization and space-charge polarization. We then demonstrate transient negative differential capacitance in thin film capacitors. The space-charge polarization caused by long-range movement and trapping of protons dominates when the electric field exceeds the threshold value. First-principles calculations suggest the polarization originates from the polar structure created by H doping. We find that polarization decays within ~1 second which is an interesting temporal regime for neuromorphic computing hardware design, and we implement the transient characteristics in a neural network to demonstrate unsupervised learning. These discoveries open new avenues for designing ferroelectric materials and electrets using light-ion doping.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Giant interfacial spin Hall angle from Rashba-Edelstein effect revealed by the spin Hall Hanle process

The Rashba-Edelstein effect (REE), which generates interfacial spin polarization and subsequent spin current, is a compelling spin-charge conversion mechanism for spintronic applications, since it’s not limited by the elemental spin-orbit couplings. In this work we demonstrate REE at Pt/ferroelectric interfaces by showing a positive correlation between polarization and effective spin Hall angle in the recently elucidated spin Hall Hanle effects (SHHE), in which a Larmor precession of spin polarization in a diffusion process from the interface manifest as magnetoresistance and Hall effect. We show that REE leads to a large enhancement of the effective spin Hall angle of ferroelectric interface Pt/h-LuFeO 3 compared with that of Pt/Al 2 O 3 , without obvious differences in the spin relaxation time. Modeling using SHHEs involving REE as an additional source of interfacial polarization suggests that REE can lead to an interfacial spin Hall angle (0.4 ± 0.1) in Pt/h-LuFeO 3 that is one order of magnitude larger than the bulk value of Pt. Our results demonstrate that a ferroelectric interface can produce large spin-charge conversion and that SHHEs are a sensitive tool for characterizing interfacial spin-transport properties.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Anisotropic optical and magnetic response in self-assembled TiN–CoFe 2 nanocomposites

Transition metal nitrides (e.g., TiN) have shown tremendous promise in optical metamaterials for nanophotonic devices due to their plasmonic properties comparable to noble metals and superior high temperature stability. Vertically aligned nanocomposites (VANs) offer a great platform for combining two dissimilar functional materials with a one-step deposition technique toward multifunctionality integration and strong structural/property anisotropy. Here, we report a two-phase nanocomposite design combining ferromagnetic CoFe 2 nanosheets in the plasmonic TiN matrix as a new hybrid plasmonic metamaterial. The hybrid metamaterials exhibit anisotropic optical and magnetic responses, as well as a pronounced magneto-optical coupling response evidenced by Magneto-optic Kerr Effect measurement, owing to the novel vertically aligned structure. This work demonstrates a new TiN-based metamaterial with anisotropic properties and multifunctionality toward light polarization modulation, optical switching, and integrated optics.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Domain-wall magnetoelectric coupling in multiferroic hexagonal YbFeO 3 films

Electrical modulation of magnetic states in single-phase multiferroic materials, using domain-wall magnetoelectric (ME) coupling, can be enhanced substantially by controlling the population density of the ferroelectric (FE) domain walls during polarization switching. In this work, we investigate the domain-wall ME coupling in multiferroic h-YbFeO 3 thin films, in which the FE domain walls induce clamped antiferromagnetic (AFM) domain walls with reduced magnetization magnitude. Simulation according to the phenomenological theory indicates that the domain-wall ME effect is dramatically enhanced when the separation between the FE domain walls shrinks below the characteristic width of the clamped AFM domain walls during the ferroelectric switching. Experimentally, we show that while the magnetization magnitude remains same for both the positive and the negative saturation polarization states, there is evidence of magnetization reduction at the coercive voltages. These results suggest that the domain-wall ME effect is viable for electrical control of magnetization.

42 ENGINEERING↗
DOE OSTI2023

Pressure-induced charge orders and their postulated coupling to magnetism in hexagonal multiferroic LuFe 2 O 4

Hexagonal LuFe 2 O 4 is a promising charge order (CO) driven multiferroic material with high charge and spin-ordering temperatures. The coexisting charge and spin orders on Fe 3+ /Fe 2+ sites result in magnetoelectric behaviors, but the coupling mechanism between the charge and spin orders remains elusive. Here, by tuning external pressure, we reveal three charge-ordered phases with suggested correlation to magnetic orders in LuFe 2 O 4 : (i) a centrosymmetric incommensurate three-dimensional CO with ferrimagnetism, (ii) a non-centrosymmetric incommensurate quasi-two-dimensional CO with ferrimagnetism, and (iii) a centrosymmetric commensurate CO with antiferromagnetism. Experimental in situ single-crystal X-ray diffraction and X-ray magnetic circular dichroism measurements combined with density functional theory calculations suggest that the charge density redistribution caused by pressure-induced compression in the frustrated double-layer [Fe 2 O 4 ] cluster is responsible for the correlated spin-charge phase transitions. The pressure-enhanced effective Coulomb interactions among Fe-Fe bonds drive the frustrated (1/3, 1/3) CO to a less frustrated (1/4, 1/4) CO, which induces the ferrimagnetic to antiferromagnetic transition. Our results not only elucidate the coupling mechanism among charge, spin, and lattice degrees of freedom in LuFe 2 O 4 , but also provide a new way to tune the spin-charge orders in a highly controlled manner.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Electronic Structure and Quantum Spin Correlations in Novel Magnetic Compounds

This project has studied the development of new magnetic materials with high magnetocrystalline anisotropy, magnetization, and high Curie temperatures, novel magnetic nanostructures that show skyrmions in the length scale of the range of 10 nm, and Heusler compounds with noncoplanar and noncollinear spin structures with topological Hall effect. The materials investigated towards this project are promising for next-generation energy and information devices. Most importantly, this project has provided fundamental understanding of science and technology behind the above-mentioned materials and insights for future strategies to satisfy the rapidly growing demands of magnetic materials in many applications.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Comprehensive demonstration of spin Hall Hanle effects in epitaxial Pt thin films

In this work, we demonstrate a nonlinear Hall effect due to the boundary spin accumulation in Pt films grown on Al 2 O 3 substrates. This Hall effect and the previously demonstrated Hanle magnetoresistance provide a complete picture of the spin-precession control of the spin and charge transport at the boundary of a spin-orbit coupled material, which we refer to as spin Hall Hanle effects (SHHE). We also show that the SHHE can be employed to measure the spin diffusion length, the spin Hall angle, and the spin relaxation time of heavy metal without the need of magnetic interface or the input from other measurements. The comprehensive demonstration of SHHE in such a simple system suggests they may be ubiquitous and needs to be considered for unraveling the spin and charge transport in more complex thin-film structures of spin-orbit coupled materials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Spontaneous Polarization in an Ultrathin Improper-Ferroelectric/Dielectric Bilayer in a Capacitor Structure at Cryogenic Temperatures

To determine the effect of depolarization and the critical thickness in improper-ferroelectric hexagonal-ferrite thin films, we investigate the polarization switching of a ferroelectric/dielectric bilayer in capacitor structures at 20 K. Experimentally, we show that the spontaneous polarization persists throughout the studied thickness range (3 to 80 unit cell), even with a thick (10-nm) dielectric layer, suggesting no practical thickness limit for applications. By fitting the effect of depolarization using the phenomenological theory, we show that the spontaneous polarization remains finite when the thickness of the ferroelectric layer approaches zero, providing a hint for the absence of critical thickness. We also find that the interfacial effects limit the multidomain formation and govern the polarization switching mechanisms.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Persistent opto-ferroelectric responses in molecular ferroelectrics

Persistent photoresponses require optical excitations to metastable states, which are rare of ionic origin due to the indirect photon-ion interaction. In this work, we explore the photoinduced metastable proton states in the proton-transfer type molecular ferroelectric croconic acid.We observe that, after the photoexcitation, the changes of structural and ferroelectric properties relax in ~10 3 s, indicating persistent photoresponses of ionic origin. In contrast, the photoconductivity relaxes within 1 s. The 10 3 s timescale suggests that the ionic metastable states result from proton transfer both along and out of the hydrogen bonds. Furthermore, this discovery unveils an ionic mechanism for the phototunability, which offers persistent opto-ferroelectric control for proton-transfer type molecular ferroelectrics.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Intrinsic ferroelectricity in Y-doped HfO 2 thin films

Ferroelectric HfO 2 -based materials hold great potential for the widespread integration of ferroelectricity into modern electronics due to their compatibility with existing Si technology. Earlier work indicated that a nanometre grain size was crucial for the stabilization of the ferroelectric phase. This constraint, associated with a high density of structural defects, obscures an insight into the intrinsic ferroelectricity of HfO 2 -based materials. Here we demonstrate that stable and enhanced polarization can be achieved in epitaxial HfO 2 films with a high degree of structural order (crystallinity). In this work, an out-of-plane polarization value of 50 μC cm –2 has been observed at room temperature in Y-doped HfO 2 (111) epitaxial thin films, with an estimated full value of intrinsic polarization of 64 μC cm –2 , which is in close agreement with density functional theory calculations. The crystal structure of films reveals the $Pca2_1$ orthorhombic phase with small rhombohedral distortion, underlining the role of the structural constraint in stabilizing the ferroelectric phase. Our results suggest that it could be possible to exploit the intrinsic ferroelectricity of HfO 2 -based materials, optimizing their performance in device applications.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Magnetic moments and spin structure in single-phase B20 Co 1+x Si 1-x (x = 0.043)

Neutron powder diffraction (NPD) and x-ray magnetic circular dichroism (XMCD) spectroscopy are employed to investigate the magnetism and spin structure in single-phase B20 Co 1.043 Si 0.957 . The magnetic contributions to the NPD data measured in zero fields are consistent with the helical order among the allowed spin structures derived from group theory. The magnitude of the magnetic moment is (0.3 ± 0.1) μ B /Co according to NPD, while the surface magnetization probed by XMCD at 3 kOe is (0.18–0.31) μ B /Co. Both values are substantially larger than the bulk magnetization of 0.11 μ B /Co determined from magnetometry at 70 kOe and 2 K. Finally, these experimental data indicate the formation of a helical spin phase and the associated conical states in high magnetic fields.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Highly Oriented Organic Ferroelectric Films with Single-Crystal-Level Properties from Restrained Crystallization

Device applications often require thin film growth with quasi-two-dimensional morphology and crystallization which are not always compatible. In this work, we exploit the method of low-temperature deposition followed by restrained crystallization (LDRC) in the growth of crystalline organic molecular thin films, which tend to grow three-dimensionally with random orientations. We demonstrate that, for 2-methylbenzimidazole (MBI), a molecular ferroelectric that tends to crystalize in spherulites, the quasi-two-dimensional films can be grown using LDRC with highly oriented polar axes and single-crystal-level ferroelectric properties. The crystallization process was shown to occur during the post-deposition annealing process using the in situ electrical measurements. The limited diffusion, low nucleation density, and low activation energy was found critical for the formation of the plate-shaped quasi-two-dimensional films. These results mark an important step in elucidating the LDRC as an effective and general approach for fabricating films with balanced crystallinity and morphology which are critical for applications.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Core-shell metallic alloy nanopillars-in-dielectric hybrid metamaterials with magneto-plasmonic coupling

Combining plasmonic and magnetic properties, namely magneto-plasmonic coupling, inspires great research interest and the search for magneto-plasmonic nanostructure becomes considerably critical. In this work, we designed a nanopillar-in-matrix structure with core–shell alloyed nanopillars for both BaTiO 3 (BTO)-Au 0.5 Co 0.5 (AuCo) and BTO-Au 0.25 Cu 0.25 Co 0.25 Ni 0.25 (AuCuCoNi) hybrid systems, i.e., ferromagnetic alloy cores (e.g., Co or CoNi) with plasmonic shells (e.g., Au or Au/Cu). These core–shell alloy nanopillars are uniformly embedded into a dielectric BTO matrix to form a vertically aligned nanocomposite (VAN) structure. Both hybrid systems present excellent epitaxial quality and interesting multi-functionality, e.g., high magnetic anisotropy, magneto-optical coupling response, tailorable plasmonic resonance wavelength, tunable hyperbolic properties and strong optical anisotropy. These alloyed nanopillars-in-matrix designs provide enormous potential for complex hybrid material designs with multi-functionality and demonstrate strong interface enabled magneto-plasmonic coupling along with plasmonic and magnetic performance.

36 MATERIALS SCIENCE↗