Engineering topics

Xu, Yi

Publications and source records attributed to Xu, Yi.

8 records

DOE OSTI2025

Modelling the Effects of Wetland Restoration on Coastal Hydrology: A Case Study of Elkhorn Slough Watershed, California

ABSTRACT Coastal wetlands, some of the most productive ecosystems on Earth, provide critical ecosystem services, including support of biodiversity, carbon sequestration and flood protection. In recent decades, these ecosystems have experienced extensive coastal wetland loss. Coastal wetland restoration provides a beacon of hope, offering a chance to reclaim these important habitats. However, even with billions of dollars invested worldwide in restoring coastal wetlands, we still lack comprehensive knowledge about the effectiveness of these restoration efforts in recovering wetland ecosystem functions and how future climate change may affect these efforts. The ability to evaluate how these ecosystems will function in the future is vital for examining current investments and developing future protection and management plans. We selected Elkhorn Slough, a tidal estuary, in California, to investigate the impact of wetland restoration and sea level rise (SLR) on coastal hydrology using the process‐based coastal hydrologic model, Advanced Terrestrial Simulator (ATS), informed by site‐specific data. We designed a novel modelling workflow for incorporating wetland restoration features into land cover and soil properties for the model parameterization. The validation results demonstrate a strong agreement between modelled and observed data. We studied the characteristics of coastal watershed hydrology, then focused on the surface water dynamics at two wetland sites within Elkhorn Slough, a reference site and a restored site. Our simulation results indicate that the restored site successfully maintains surface elevation, resulting in reduced surface inundation. We also examined the impact of wetland restoration under expected SLR over the next few decades. The low‐lying Yampah Marsh, the reference site, is likely to be inundated due to future SLR when highest tides arrive, while a higher percentage of Hester Marsh, the restored site, would retain marsh vegetation in coming decades, regardless of tidal conditions. Our study provides important information for examining the outcome of restoration practices that include surface elevation in tidal wetlands under climate changes.

advanced terrestrial simulator↗

DOE OSTI2024

A global urban heat island intensity dataset: Generation, comparison, and analysis

The urban heat island (UHI) effect, a phenomenon of local warming over urban areas, is the most well-known impact of urbanization on climate. Globally consistent estimates of the UHI intensity (UHII) are crucial for examining this phenomenon across time and space. However, publicly available UHII datasets are limited and have several constraints: (1) they are for clear-sky surface UHII, not all-sky surface UHII and canopy (air temperature) UHII; (2) the estimation methods often neglect anthropogenic disturbance, introducing uncertainties in the estimated UHII. To address these issues, this study proposes a new dynamic equal-area (DEA) method that can minimize the influence of various confounding factors on UHII estimates through a dynamic cyclic process. Utilizing the DEA method and leveraging various gridded temperature data, we develop a global-scale (>10,000 cities), long-term (over 20 years by month), and multi-faceted (clear-sky surface, all-sky surface, and canopy) UHII dataset. Further, based on these estimates, we provide a comprehensive analysis of the UHII and its trends in global cities. The UHII is found to be greater than zero in >80% of cities, with global annual average magnitudes around 1.0 °C (day) and 0.8 °C (night) for surface UHII, and close to 0.5 °C for canopy UHII. Furthermore, an interannual upward trend in UHII is observed in >60% of cities, with global annual average trends exceeding 0.1 °C/decade (day) and over 0.06 °C/decade (night) for surface UHII, and slightly surpassing 0.03 °C/decade for canopy UHII. Notably, there exists a positive correlation between the magnitude and trend of UHII, suggesting that cities with stronger UHII tend to experience faster growth in UHII. Additionally, discrepancies in UHII are found between different temperature data, stemming not only from distinctions in data types (surface or air temperature) but also from differences in data acquisition times (Terra or Aqua), weather conditions (clear-sky or all-sky), and processing methodologies (with or without gap filling). Overall, our proposed method, dataset, and analysis results have the potential to provide valuable insights for future urban climate studies. The UHII dataset is publicly available at https://doi.org/10.6084/m9.figshare.24821538.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2024

Enhanced Carbon‐Carbon Coupling at Interfaces with Abrupt Coordination Number Changes

Abstract Cu‐catalyzed electrochemical CO 2 reduction reaction (CO 2 RR) produces multi‐carbon (C 2+ ) chemicals with considerable selectivities and activities, yet required high overpotentials impede its practical application. Here, we design interfaces with abrupt coordination number (CN) changes that greatly reduce the applied potential for achieving high C 2+ Faradaic efficiency (FE). Encouraged by the mechanistic finding that the coupling between *CO and *CO(H) is the most probable C−C bond formation path, we use Cu 2 O‐ and Cu‐phthalocyanine‐derived Cu (OD−Cu and PD−Cu) to build the interface. Using operando X‐ray absorption spectroscopy (XAS), we find that the Cu CN of OD−Cu is ~11, favoring CO* adsorption, while the PD−Cu has a COH*‐favorable CN of ~4. Operando Raman spectroscopy revealed that the interfaces with abrupt CN changes promote *OCCOH formation. As a result, the designed catalyst achieves a C 2+ FE of 85±2 % at 220 mA cm −2 in a zero‐gap CO 2 electrolyzer. An improvement of C 2+ FE by 3 times is confirmed at the low potential regime where the current density is 60–140 mA cm −2 , compared to bare OD−Cu. We report a 45‐h stable CO 2 RR operation at 220 mA cm −2 , producing a C 2+ product FE of ~80 %.

Chemistry↗

DOE OSTI2024

Satellite Clear‐Sky Observations Overestimate Surface Urban Heat Islands in Humid Cities

Satellite-based thermal infrared (TIR) land surface temperature (LST) is hindered by cloud cover and is applicable solely under clear-sky conditions for estimating surface urban heat island intensity (SUHII). Clear-sky SUHII may not accurately represent all-sky conditions, potentially introducing quantitative biases in assessing urban heat islands. However, the differences between clear-sky and all-sky SUHIIs and their spatiotemporal variations are still poorly understood. Our analysis of over 600 global cities demonstrates that clear-sky SUHII is mostly higher than all-sky SUHII, particularly in summer, daytime, and precipitation-rich regions. Besides, clear-sky SUHII typically exhibits stronger seasonal and diurnal contrasts than all-sky SUHII, especially for cities located in humid regions. These discrepancies can be attributed mainly to the increased missing LST data caused by cloud enhancement in urban areas. Our findings highlight the tendency for clear-sky observations to overestimate SUHII, providing valuable insights for standardizing the quantification of surface urban heat islands.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2023

Controlling Mass Transport in Direct Carbon Dioxide Zero-Gap Electrolyzers via Cell Compression

The development of high-performance CO 2 electrolyzers is crucial for accelerating the sustainable production of fuels and chemicals integrated with renewable energy sources. Here, we introduce a methodology to actively control mass transport inside a realistic zero-gap membrane electrode assembly of a CO 2 electrolyzer by varying the gasket thickness, which consequently changes the cell compression. This allows control over the thickness and porosity of the gas diffusion electrodes, influencing the overall electrolyzer performance, as demonstrated using Ag-deposited electrodes. At low operating voltages (<2.9 V), both high- and low-compression electrolyzers exhibit similar faradaic efficiencies and partial current densities for CO formation. However, at high voltages, the low-compression electrolyzer with high electrode porosity demonstrates superior CO selectivity and activity with suppressed H 2 formation. These experimental results are validated by the computational membrane electrode assembly (MEA) model developed by using the measured in situ electrode thicknesses and electrode porosities. Additionally, liquid electrolyte saturation at the catalyst layer is found to play a dominant role in determining the mass transport, resulting in a decreased electrolyzer performance with low electrode porosity. Finally, the systematic investigation in this study improves the understanding of the transport dynamics in MEA-based devices and provides insights into optimizing device design parameters for industry-relevant CO 2 electrolysis.

30 DIRECT ENERGY CONVERSION↗

DOE OSTI2023

Influence of urban extent discrepancy on the estimation of surface urban heat island intensity: A global-scale assessment in 892 cities

The estimation of surface urban heat island intensity (SUHII) is crucial for studying the urban thermal environment, which is influenced not only by the commonly known definition of rural reference but also by the delineation of urban extent. Existing studies relies on various urban extent products defined in different ways, and the influence of urban extent discrepancy (UED) on SUHII estimates still remains unclear. In this study, we collected five open-source global urban extent products (GUEPs) for the year 2015 and corresponding daily land surface temperature (LST) observations (MYD11A1). Based on these products, we quantified the UED-induced uncertainty in SUHII estimates by comparing absolute difference (ΔSUHII AD ) and relative difference (ΔSUHII RD ) in SUHII among GUEPs across 892 global cities. Additionally, we introduced an ISF-constrained (ISF–C) method to reduce SUHII differences among GUEPs by constraining the impervious surface fraction (ISF) within urban and rural extents. The results show that urban extents delineated by different GUEPs are not consistent, leading to their difference in ISF as well as LST, which in turn causes uncertainties in the estimated SUHII. On average for global cities, the annual daytime and nighttime ΔSUHII AD are 0.46 ± 0.02 °C (mean ± 95% confidence interval) and 0.24 ± 0.01 °C, with corresponding ΔSUHII RD of 42.0 ± 2.7% and 35.2 ± 2.3%, respectively. The UED-induced uncertainty in SUHII estimates varies among climate zones, and the annual daytime ΔSUHII RD averaged for cities located in the arid zone reaches up to 60.8 ± 6.6%, which is nearly twice as high as that in other climate zones. More importantly, both ΔSUHII AD and ΔSUHII RD show lower values when using the ISF-C method, implying the effectiveness of this method. This study highlights the non-negligible impact of UED on the estimation of SUHII, which requires more attention due to the inconsistency of urban extents among current products.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2023

An adaptive synchronous extraction (ASE) method for estimating intensity and footprint of surface urban heat islands: A case study of 254 North American cities

The urban heat island (UHI) effect has attracted great attention due to its potential impacts on rapidly growing urban areas. Using remotely sensed estimates of land surface temperature (LST), a large number of studies have focused on the surface UHI (SUHI) effect, which can be characterized by its two fundamental properties: intensity and footprint. The SUHI intensity reflects the LST difference between the urban area and the background reference area (BRA), and the SUHI footprint indicates the spatial extent influenced by the heat island. Currently, numerous methods have been developed to estimate the SUHI intensity and footprint, but are still greatly challenged by three main issues. Namely, the discrepancy in BRA selection criterion brings great uncertainty to the estimated SUHI intensity, the estimation of SUHI footprint is largely constrained by the predefined models, and the quantification of SUHI effect is potentially influenced by several confounding factors. Here, we proposed an adaptive synchronous extraction (ASE) method, which is capable of adaptively selecting the most optimal BRA while removing the influence of confounding factors, and achieving synchronous estimation of SUHI intensity and footprint. We applied the ASE method to 254 North American cities and conducted an in-depth comparative analysis to discuss its applicability and benefits. The main results include: (1) The ASE method avoids the limitations of existing methods in BRA selection and model presetting, and shows resilience to parameter variations. This makes the ASE method highly applicable to quantify the SUHI intensity and footprint in cities with various thermal characteristics. (2) The ASE method can better highlight the spatial, seasonal and day-night contrasts in the estimated SUHI intensity. This superiority is particularly evident when comparing it to methods based on the equal-area buffer or the simplified urban-extent algorithm. (3) Confounding factors pose non-negligible impacts on the quantification of the SUHI effect. Typically, ignoring the influence of topographic relief or missing LST data can lead to an overall overestimation of the SUHI intensity, while not removing surrounding urban areas will cause some underestimation of the SUHI intensity. In conclusion, overall, the proposed ASE method provides a new generalizable tool for quantifying the SUHI effect, which has great potentials for future studies and urban climate assessments.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2023

Coordination Polymer Electrocatalysts Enable Efficient CO‐to‐Acetate Conversion

Abstract Upgrading carbon dioxide/monoxide to multi‐carbon C 2+ products using renewable electricity offers one route to more sustainable fuel and chemical production. One of the most appealing products is acetate, the profitable electrosynthesis of which demands a catalyst with higher efficiency. Here, a coordination polymer (CP) catalyst is reported that consists of Cu(I) and benzimidazole units linked via Cu(I)‐imidazole coordination bonds, which enables selective reduction of CO to acetate with a 61% Faradaic efficiency at −0.59 volts versus the reversible hydrogen electrode at a current density of 400 mA cm −2 in flow cells. The catalyst is integrated in a cation exchange membrane‐based membrane electrode assembly that enables stable acetate electrosynthesis for 190 h, while achieving direct collection of concentrated acetate (3.3 molar) from the cathodic liquid stream, an average single‐pass utilization of 50% toward CO‐to‐acetate conversion, and an average acetate full‐cell energy efficiency of 15% at a current density of 250 mA cm −2 .

Luo, Mingchuan↗