Search NASA⌕ Search

Engineering topics

Yablonsky, Gregory

Publications and source records attributed to Yablonsky, Gregory.

Understanding Catalyst ‘Volcano’ Dependence Through Fermi-Level Controlled Kinetics Using Electronic Theory

The ubiquitous two-step Michaelis–Menten and Temkin–Boudart reaction mechanisms are extended to include the influence of the catalyst electronic subsystem in a 5-step mechanism. The resulting kinetic equation provides an alternative explanation for the well-known volcano-shaped dependence found in catalysis. The equilibrium constants of fast electronic steps are highlighted for their influence on adsorption and desorption through the relative concentration of charged versus neutral intermediates. This generalized concept can be widely applied to determine the optimal catalyst, based on the Fermi level of the material, for reactions proceeding via this universal reaction.

25 ENERGY STORAGE↗

Mechanistic pathways and role of oxygen in oxidative coupling of methane derived from transient kinetic studies

Oxidative coupling of methane (OCM) is a promising industrial process to upgrade natural gas to high value chemicals. In this study, Temporal Analysis of Products (TAP) and steady-state experiments were conducted to distinguish how the composition of surface and gas phase oxygen influence mechanistic details of the selective conversion of CH 4 to C 2 H 4 over the Mn-Na 2 WO 4 /SiO 2 catalyst. The results from TAP studies indicate that methane activation on this catalyst proceeds predominantly via a short-lived, transient surface oxygen species and there is a competition for this species to form either CO or methyl radicals on the surface. This active species has a total lifetime of 3 s and is identified to have a dioxygen (e.g. O 2 2- or O 2 -) form. We show that the concentration of the transient surface oxygen species significantly impacts the OCM performance. Oxygen attributed to the catalyst lattice (in a singular form e.g., O - ), is found to activate methane to a lesser degree, but exclusively forms CO 2 . Evidence for these surface pathways for methyl radical, CO and CO 2 formation identified by TAP are also validated through steady-state experiments. Finally, by distinguishing different catalyst oxygen species and their role in selective/nonselective pathways, important screening criteria have been identified for the advancement of superior catalyst formulations.

36 MATERIALS SCIENCE↗

Understanding Reaction Networks through Controlled Approach to Equilibrium Experiments Using Transient Methods

We report a combined experimental/theoretical approach to studying heterogeneous gas/solid catalytic processes using low-pressure pulse response experiments achieving a controlled approach to equilibrium that combined with quantum mechanics (QM)-based computational analysis provides information needed to reconstruct the role of the different surface reaction steps. We demonstrate this approach using model catalysts for ammonia synthesis/decomposition. Polycrystalline iron and cobalt are studied via low-pressure TAP (temporal analysis of products) pulse response, with the results interpreted through reaction free energies calculated using QM on Fe-BCC(110), Fe-BCC(111), and Co-FCC(111) facets. In TAP experiments, simultaneous pulsing of ammonia and deuterium creates a condition where the participation of reactants and products can be distinguished in both forward and reverse reaction steps. This establishes a balance between competitive reactions for D* surface species that is used to observe the influence of steps leading to nitrogen formation as the nitrogen product remains far from equilibrium. Here, the approach to equilibrium is further controlled by introducing delay timing between NH 3 and D 2 which allows time for surface reactions to evolve before being driven in the reverse direction from the gas phase. The resulting isotopic product distributions for NH 2 D, NHD 2 , and HD at different temperatures and delay times and NH 3 /D 2 pulsing order reveal the role of the N 2 formation barrier in controlling the surface concentration of NH x * species, as well as providing information on the surface lifetimes of key reaction intermediates. Conclusions derived for monometallic materials are used to interpret experimental results on a more complex and active CoFe bimetallic catalyst.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Kinetic Measurements in Heterogeneous Catalysis

This contribution is about the experimental determination of the rate of a heterogeneous catalytic reaction and the analysis of kinetic data. In this case, the reaction rate can be defined as the frequency at which the closed sequence of elementary steps transforming reactants into products is occurring. However, the rate of chemical reaction is not directly observed; rather, one records the rate of substance change. The rate of chemical reaction is calculated based on the rate of substance change and assumed stoichiometry of the reaction. In order to make this an intensive quantity (i.e., independent of the volume in which the reaction is performed, this frequency is divided by the latter or by a quantity proportional to the latter). As the focus of what follows is on heterogeneously catalyzed reactions this can be the catalyst mass, the catalyst surface area or the total number of active sites present in the reaction volume confined by the walls of a chemical reactor. For example, the rate may be reported as one of the following: Net rate of consumption/production of component i mol m-3 s-1 Net specific rate of consumption/production of component i mol kg-1 s-1 Rate of substance change (per unit volume of catalyst) mol m-3 s-1 Specific reaction rate (per unit mass of catalyst) mol kg-1 s-1 Net rate of consumption/production of component i mol m-2 s-1 The turnover frequency (TOF) is a characteristic originally introduced by Boudart [1] is expressed as TOF=R/G_tot , where R is the steady-state rate of reactant consumption or product generation and G_totis the total areal density of active sites [mol m-2]. The latter is typically taken from experimental chemisorption data obtained at low temperature. The advancement of a chemical reaction leads to changes in the amounts of reactants and products which, for a stoichiometric single reaction, are connected by the stoichiometric coefficients. In many cases, for the sake of simplicity, we will assume that the investigated reaction proceeds according to a single reaction pathway, so that the net production rate of a reaction component is directly proportional to the reaction rate and that the latter equals the net production rate of any of the involved components when divided by the appropriate stoichiometric coefficient. For complex stoichiometric reactions the net production rates of the involved components are linear combinations of the reaction rates. Different goals for kinetic measurements can be formulated: Catalyst testing, i.e., obtaining the kinetic dependences for the development and discrimination of efficient catalytic materials. Precise kinetic characterization of active materials via high-throughput screening is a part of such activity. Detailed kinetics, i.e., revealing the detailed mechanism of complex catalytic reaction via systematic kinetic studies, both steady-state and non-steady-state Industrial kinetics, i.e., obtaining data and relationships for describing and predicting the behaviour of catalytic reactors and processes at industrial scale Finally, mathematical modeling and analysis where kinetic measurements provide data for understanding complex kinetic phenomena, e.g., oscillations, non-linear self-organization, etc.

36 MATERIALS SCIENCE↗

Pt-Assisted Carbon Remediation of Mo2C Materials for CO Disproportionation

Using the CO disproportionation (Boudouard) reaction as a probe reaction, an in-depth analysis of temperature-programmed pulse response data shows that the addition of Pt to Mo2C mitigates deactivation of Mo active sites by acting as a carbon collector. CO2 production on Mo2C and Pt/Mo2C materials is dependent on both the activation energy and the CO surface concentration. Detailed plane-wave density functional theory calculations of the CO adsorption and disproportion reactions on Mo2C-supported Pt nanoparticles (NPs) are reported. The Mo2C was modeled by the ß-Mo2C (100) surface, and the Pt/Mo2C interface was modeled by the addition of 12 Pt atoms to the Mo2C (100) surface (12Pt@Mo2C). The potential energy surfaces of the Boudouard reaction were calculated on pure Mo2C, 12Pt@Mo2C, and Pt (111) surfaces. CO dissociation readily occurs on the Mo2C (100) surface, but not on the Pt (111) surface, with the former being exothermic and the latter being endothermic. At the Pt/Mo2C interface, CO dissociation is still exothermic, but with a larger energy barrier. The Boudouard reaction takes place on the Mo2C region, where CO2 is formed from a surface O atom dissociated from one CO molecule in reaction with another CO molecule, leaving one C atom on the surface. C adsorption is preferential on the Pt site in comparison to the Mo site. The supported Pt domains can collect the remaining C atoms, facilitating further CO2 formation on the active Mo sites. A Bader charge analysis shows that the surface metal-carbon bond is a mixture of covalent and ionic bonds, whereas the surface metal-oxygen bond is ionic. Electron localization function (ELF) and partial charge density calculations agree well with the Bader charge analysis. These computational results are consistent with experimental observations of the interaction of CO with Mo2C nanotube supported Pt domains in the transient regime under far from equilibrium conditions. The Boudouard reaction is an important side reaction, and the unexpected role found for Pt as a carbon collector, with Mo serving as a disproportionation site, provides a unique vantage point for understanding carbon and coke formation on catalytic materials.

Pt-assisted carbon remediation, Pt/Mo2C interface,↗

Optimizing complexity in the kinetic modelling of integrated flue gas purification for pressurized oxy-combustion

A 5-step mechanism and a corresponding kinetic model are presented for integrated flue gas purification, where SOx and NOx are removed during pressurized oxy-coal combustion. Three coupled subsystems (‘blocks”) of gas–liquid transformations are considered: 1) oxidation of NO to NO 2 and dissolution of NO 2 in water; 2) dissolution of SO 2 in the water; and 3) interactions between S- and N- containing substances in the liquid phase. The model has been formulated in terms of only species that can be experimentally measured (model of optimal complexity). Subsystem I is limiting regarding NO removal. Subsystem II is very fast in comparison with the other subsystems and can be treated separately. Analytical expressions for all independent subsystems have been found and compared with computational results for the whole system. The temporal domain of validity of all these subsystems is presented. Finally, the validity of the NO 2 quasi-steady-state assumption is verified, and it is reported that variables such as NO, NO 2 and HNO 3 can be considered decoupled from the whole system since they appear in only Subsystem I, while HSO 3 - and HNO 2 are coupled. The presented kinetic model was verified experimentally by determining the 1:1 ratio of HNO 2 and HNO 3 , in gas–liquid NO-O 2 interaction. Additionally, new experimental facts on kinetic orders and stoichiometry between HNO 2 and HSO 3 - have been used to optimize the model. It is concluded that all NO x - SO x interactions can be essentially grasped by a sequence of only 4 irreversible reactions considering, in addition, the 5th reaction, i.e. the fast ‘SO 2 -water’ equilibrium.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Rate/Concentration Kinetic Petals: A Transient Method to Examine the Interplay of Surface Reaction Processes

Transient pulse response experiments are used to construct rate/concentration (RC) kinetic dependencies—RC petals—and provide a new method to distinguish the timing and interplay of adsorption, surface reaction, and product formation on complex (industrial) materials. A petal shape arises as the dynamic “reaction-diffusion” experiment forces the concentration and reaction rate to return to zero. In contrast to the typical steady-state “Langmuir-type” RC dependence, RC petals have two branches, which arise as a result of decoupled gas and surface concentrations in the non-steady-state regime. To demonstrate this approach, the characteristics of petal shapes using ammonia decomposition as a probe reaction are presented. Ammonia, hydrogen, and nitrogen transformation rates are compared on three simple materials: Fe, Co, and a bimetallic CoFe preparation when ammonia is pulsed at 550°C in a low-pressure diffusion reactor. All materials demonstrate a two-branch kinetic RC dependence for ammonia adsorption, and rate constants are quantified in the low-coverage regime. We found that H 2 and N 2 product formation was dependent on the concentration of surface intermediates for all materials with one exception: for Co, an additional fast hydrogen generation process was observed; the rate of which coincided with ammonia adsorption. Nitrogen generation was only significant for CoFe and Co and on the CoFe catalyst, a self-inhibition property was observed. A method for estimating the number of active sites based on the RC petals is presented and was applied to the Fe and CoFe samples. The surface coverage and rate of formation/conversion of surface intermediates are interpreted from the examination of shape characteristics of the RC petals for each material.

36 MATERIALS SCIENCE↗

Transient Kinetic Experiments within the High Conversion Domain: The Case of Ammonia Decomposition

In the development of catalytic materials, a set of standard conditions is needed where the kinetic performance of many samples can be compared. This can be challenging when a sample set covers a broad range of activity. Precise kinetic characterization requires uniformity in the gas and catalyst bed composition. This limits the range of convecting devices to low conversion (generally <20%). While steady-state kinetics offer a snapshot of conversion, yield and apparent rates of the slow reaction steps, transient techniques offer much greater detail of rate processes and hence more information as to why certain catalyst compositions offer better performance. In this work, transient experiments in two transport regimes are compared: an advecting differential plug flow reactor (PFR) and a pure-diffusion temporal analysis of products (TAP) reactor. The decomposition of ammonia was used as a model reaction to test three simple materials: polycrystalline iron, cobalt and a bimetallic preparation of the two. These materials presented a wide range of activity and it was not possible to capture transient information in the advecting device for all samples at the same conditions while ensuring uniformity. We push the boundary for the theoretical estimates of uniformity in the TAP device and find reliable kinetic measurement up to 90% conversion. However, what is more advantageous from this technique is the ability to observe the time-dependence of the reaction rate rather than just singular points of conversion and yield. For example, on the iron sample we observed reversible adsorption of ammonia and on cobalt materials we identify two routes for hydrogen production. From the time-dependence of reactants and product, the dynamic accumulation was calculated. This was used to understand the atomic distribution of H and N species regulated by the surface of different materials. When ammonia was pulsed at 550 °C, the surface hydrogen/nitrogen, (H/N), ratios that evolved for Fe, CoFe and Co were 2.4, 0.25 and 0.3 respectively. This indicates that iron will store a mixture of hydrogenated species while materials with cobalt will predominantly store NH and N. While much is already known about iron, cobalt and ammonia decomposition, the goal of this work was to demonstrate new tools for comparing materials over a wider window of conversion and with much greater kinetic detail. As a result, this provides an approach for detailed kinetic discrimination of more complex industrial samples beyond conversion and yield.

36 MATERIALS SCIENCE↗

Carbon elimination from silicon kerf: Thermogravimetric analysis and mechanistic considerations

40% of ultrapure silicon is lost as kerf during slicing to produce wafers. Currently, kerf is not recycled due to engineering challenges and costs associated with removing its abundant impurities. Carbon left behind from the lubricant remains as one of the most difficult contaminants to remove in kerf without significant silicon oxidation. The present work enables to better understand the mechanism of carbon elimination in kerf which can aid the design of better processes for kef recycling and low cost photovoltaics. In this paper, we studied the kinetics of carbon elimination from silicon kerf in two atmospheres: air and N 2 , under a regime of no-diffusion-limitation. Here, we report the apparent activation energy in both atmospheres using three methods: Kissinger, and two isoconversional approaches. In both atmospheres, a bimodal apparent activation energy is observed, suggesting a two stage process. Furthermore, a reaction mechanism is proposed in which (a) C-C and C-O bond cleavage reactions occur in parallel with polymer formation; (b) at higher temperatures, this polymer fully degrades in air but leaves a tarry residue in N 2 that accounts for about 12% of the initial total carbon.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗