Search NASA⌕ Search

Engineering topics

Yakovlev, V. P.

Publications and source records attributed to Yakovlev, V. P..

26 records · Page 2

Design of SSR1 Single Spoke Resonators for PXIE

The Project X Injector Experiment (PXIE) at Fermilab contains one cryomodule of Single Spoke Resonators operating at 325 MHz with a geometrical beta of 0.2. Two prototypes have been tested successfully at high gradients in the Fermilab Vertica l Test Stand (VTS). We have welded a Stainless Steel helium vessel on the first prototype and tested it in the spoke-dedicated Test Cryostat. With excellent results in hand, an order for ten bare resonators was placed with US industry. A new design for th e helium vessel was developed for these resonators with the main goal of reducing the sensitivity of the resonator to variations of the helium pressure to meet the requirements of PXIE. A new tuner was developed despite the good results of the first proto type. The new design was inevitable due to the different behavior of the resonator in the new helium vessel. Other aspects were improved such as the maintainability of the tuner motor and piezoelectric actuators allowing their replacement from access port s on the cryomodule's vacuum vessel.

43 PARTICLE ACCELERATORS↗

Multi-Cavity Proton Cyclotron Accelerator: An Electron Counterpart

A multi-cavity multi-frequency proton cyclotron accelerator has been proposed. It would utilize cyclotron resonance in each of eight cavities of uniformly diminishing frequency in a uniform magnetic field to comprise a compact (25 m) 1 GeV pro ton accelerator, according to simulation results*. A four cavity electron counterpart is under construction to test the mechanism of the multi-cavity setup, including phase acceptance, energy gain, and growth of energy spread and emittance for parameters equivalent to the proton case. The four electron counterpart cavities are driven by kW-level phase coherent RF sources at 1.5, 1.8, 2.1 and 2.4 GHz. Each cavity operates in the rotating TE111 mode and includes two feeds in quadrature to drive the rotating mode and two RF pickoffs for diagnostics. The electron beam source is a low-current gun with a BaO cathode which operates at -1200V and <50 microamps. After traversing the cavities, the beam is collected on either a Faraday cup or is imaged with a phosph or screen. Details of the setup and initial results from experiments with the four cavity electron counterpart will be presented.

43 PARTICLE ACCELERATORS↗

Multipole Effects Study for Project X Front End Cavities

Effects of RF field asymmetry along with multipoles have been studied in Project X front end cavities. One family of half wave resonators operating at 162.5 and two of spoke resonators operating at 325 MHz have been analysed. HWR and spoke res onators unlike elliptical cavities, do not have axial symmetry, hence a quadrupole perturbation to the beam is present. The purpose of this paper is to explain the approach and the calculation method used to understand and overcome the drawbacks due to th e RF field asymmetry.

43 PARTICLE ACCELERATORS↗

Conceptual Design of the Project-X 1.3 GHz, 3-8 GeV Pulsed Linac

The Project-X, a multi-MW proton source, is under development at Fermilab. It enables a Long Baseline Neutrino Experiment via a new beam line pointed to DUSEL in Lead, South Dakota, and a broad suite of rare decay experiments. The facility co ntains 3-GeV 1-mA CW superconducting linac. In the second stage of about 5% of the H- beam is accelerated up to 8 GeV in a 1.3 GHz SRF pulse linac to Recycler/Main Injector. In order to mitigate the problem with the stripping foil heating during injection to the Main Injector, the pulses with higher current are accelerated in CW linac together with 1 mA beam for further acceleration in the pulse linac. The optimal current in the pulse linac is discussed as well as limitations that determine it's selection . A concept design of the pulse linac is described. The lattice design is presented as well as RF stability analysis. The necessity of the HOM couplers is discussed also.

43 PARTICLE ACCELERATORS↗

Development of an L-Band Ferroelectric Phase Shifter

Effective operation of the RF cavities in the superconducting accelerators demands fast, high-power RF vector modulators. Recent progress in development of the new materials, ferroelectrics, having tunable dielectric constant and acceptable l osses [*] gives the possibility development of such devises. In previous papers [**-***] the authors described different L-band ferroelectric phase shifter designs . At low RF level high operation speed of 2 degree/nsec was demonstrated in waveguide phase shifter. However, the experiments show that a special technology is to be developed that provides a good electric contact between ceramics and the metallic wall. In present paper a new design of the fast highpower ferroelectric phase shifter is described based on the simple ferroelectric elements.

43 PARTICLE ACCELERATORS↗

Design of Single Spoke Resonators for Project X

Project X is based on a 3 GeV CW superconducting linac and is currently in the R&D phase awaiting CD-0 approval. The low-energy section of the Project X H-linac includes three types of super-conducting single spoke cavities operating at 325 M Hz. SSR0 (26 cavities), SSR1 (18 cavities) and SSR2 (44 cavities) have a geometrical beta of = 0.11, 0.21 and 0.4 respectively. Single spoke cavities were selected for the linac in virtue of their higher r/Q. In this paper we present the decisions and ana lyses that lead to the final designs. Electro-magnetic and mechanical finite element analyses were performed with the purpose of optimizing the electro-magnetic design, minimizing frequency shifts due to Helium bath pressure fluctuations and providing a p ressure rating for the resonators that allow their use in the cryomodules.

43 PARTICLE ACCELERATORS↗

Fast ferroelectric phase shifters for energy recovery linacs

Fast phase shifters are described that use a novel barium strontium titanate ceramic that can rapidly change its dielectric constant as an external bias voltage is changed. These phase shifters promise to reduce by ~10 times the power requirements for the rf source needed to drive an energy recovery linac (ERL). Such phase shifters will be coupled with superconducting radiofrequency cavities so as to tune them to compensate for phase instabilities, whether beam-driven or those caused by microphonics. The most promising design is presented, which was successfully cold tested and demonstrated a switching speed of ~30 ns for 77 deg, corresponding to < 0.5 ns per deg of rf phase. As a result, other crucial issues (losses, phase shift values, etc.) are discussed.

43 PARTICLE ACCELERATORS↗

Fast high-power microwave ferroelectric phase shifters for accelerator application

Measurements are reported for a one-third version of a high-power L-band ferroelectric phase shifter. This phase shifter is designed to allow rapid adjustments of cavity coupling in an accelerator where RF source fluctuations, microphonics, or othe r uncontrolled fluctuations could cause undesired emittance growth. Experimental measurements of phase shift vs externally-applied voltage, insertion loss, and switching speed are presented. An average switching rate of less than 0.5 ns for each degree of RF phase has been measured.

43 PARTICLE ACCELERATORS↗