Search NASA⌕ Search

Engineering topics

Yamamoto, Y.

Publications and source records attributed to Yamamoto, Y..

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Cast Alumina-Forming Austenitic Stainless Steels for High Temperature Heat Treatment Furnace Rolls

Alloy developers worldwide have struggled to create creep-resistant alumina-forming, iron-based austenitic stainless steels for use as high-temperature structural alloys, but with limited success in balancing alloy cost, oxidation, and creep resistance. Here, this article describes the research and development of a novel cast alumina-forming austenitic stainless steel. This work won the prestigious Engineering Materials Achievement Award presented at IMAT 2023 in Detroit.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Challenges in computationally designing high temperature Fe-based austenitic alloys: Addressing the role of Ni additions

Alumina-forming austenitic (AFA) alloys are relatively inexpensive high performance materials which combine the creep resistance of low-cost austenitic alloys and the oxidation resistance of expensive alumina forming alloys. However, a fundamental understanding of the role of key alloying elements such as Ni, Cr, Al, Nb, Ti, V, B and C in the experimentally observed oxidation behavior of these alloys is still lacking. The present work is a first in a series of studies aiming to quantitatively describe the role of Ni in promoting or disrupting protective Al 2 O 3 scale formation on AFA alloys. Here, ternary Fe-Al-xNi model alloys with three different Ni contents were isothermally exposed in an atmosphere with a low partial pressure of oxygen between 800–1000 °C for 24 h to evaluate the role of Ni in the observed internal oxidation behavior. Increasing Ni contents had no impact on the internal oxidation behavior of the alloys. The experimental and theoretical analyses in the present work suggested a negligible effect of the internal oxide precipitates on the inward diffusion of oxygen, typically expected in these systems, while simultaneously highlighting the barriers in the development of reliable models for computation-assisted design of these alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Design Study of a Superconducting Quadrupole Magnet System Sustainable Under Dark Current Heating in ILC Main Linac

The International Linear Collider (ILC) main linac comprises a series of 12 m-long cryomodules. The cryomodule contains eight 9-cell superconducting (SC) RF (SRF) cavities and an SC quadrupole magnet combined with dipole correctors to focus and steer electron and positron beams. The magnets are installed between the SRF cavity string and at the longitudinal center of a common cryomodule/cryostat. These magnets are conductively cooled by pure aluminum channels thermally connected to a 2 K two-phase helium pipe for cooling the SRF cavities. A recent study shows that field-emitted electrons, so-called “dark current” initiated in the SRF cavities, are transmitted through the SRF cavity string and reach the SC magnet. The energy is inevitably absorbed in the SC coil due to the magnetic field, resulting in risks of a quench caused by the coil heating. We are investigating alternate magnet designs by using Nb $_{3}$ Sn or $\text{MgB}_{2}$ SC and by adding the dark current absorber surrounding the beam-pipe to realize sustainable magnet operation under the dark current heating. We report the design study of the magnet system and interfaces to the cryomodule accommodating it with the SRF cavities.

43 PARTICLE ACCELERATORS↗
DOE OSTI2021

Search for in-band transitions in the candidate superdeformed band in Si 28

Background: Superdeformed (SD) bands are suggested by theory around Ca 40 and in lighter alpha-conjugate nuclei such as Mg 24 , Si 28 , and S 32 . Such predictions originate from a number of theoretical models including mean-field models and antisymmetrized molecular dynamics (AMD) calculations. While SD bands have been identified in Ca 40 and its near neighbors, evidence of their existence in the lighter, midshell nuclei is circumstantial at best. Additionally, the key evidence of superdeformation would be the observation of transitions with high B ( E 2 ) transition strengths connecting states in a rotational sequence. This is challenging information to obtain since the bands lie at a high excitation energy and competition from out-of-band decay is dominant. Purpose: The purpose of the present study is to establish a new methodology to circumvent the difficulties in identifying and quantifying in-band transitions through directly populating candidate states in the SD band in Si 28 through inelastic alpha scattering, selecting such states with a spectrometer, and measuring their gamma-ray decay with a large array of high-purity germanium detectors, allowing direct access to electromagnetic transition strengths. Methods: Excited states in Si 28 were populated in the Si 28 ( α , α ' ) reaction using a 130-MeV He 4 beam from the K140 AVF cyclotron at the Research Center for Nuclear Physics. Outgoing alpha particles were analyzed using the Grand Raiden spectrometer positioned at an angle of 9 . 1 ° to favor the population of states with J ≈ 4 . Coincident gamma rays were detected with the CAGRA array of 12 HPGe clover detectors augmented by a set of four large LaBr 3 detectors. Results: Data analysis showed that it was possible to identify additional low-energy transitions in competition with high-energy decays from excited states in Si 28 in the vicinity of 10 MeV. However, while the candidate 4 + SD state at 10.944 MeV was populated, a 1148-keV transition to the candidate 2 + SD state at 9.796 MeV was not observed, and only an upper limit for its transition strength of B ( E 2 ) < 43 W.u. could be established. This contradicts AMD predictions of ≈ 200 W.u. for such a transition. Conclusion: The present study strongly rejects the hypothesis that the candidate set of states identified in Si 28 represents an SD band, which demonstrates the potential of the methodology devised here.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Investigation of the isoscalar response of 24 Mg to 6 Li scattering

24 Mg is a strongly deformed nucleus in the ground state. Deformation effects can be observed in the structure of the isoscalar giant monopole and quadrupole resonances. 24 Mg is also a nucleus that is well known to present different types of cluster-oscillation modes. Both giant resonances and cluster states are strongly populated by isoscalar transitions. To extract the E0, E1, and E2 transition strengths via 6 Li scattering. The 6 Li probe is a powerful tool for investigating the isoscalar nuclear response with a very favorable ratio of resonance-to-continuum background. Double-differential cross sections of 6 Li inelastic scattering, at the beam energy of 100 MeV/u, were measured in the excitation-energy range 10 – 40 MeV and scattering angles 0 - 3°. A multipole-decomposition analysis was performed for extracting the isoscalar E0 , E1, and E2 strength distributions. Results: The extracted multipole strengths were compared with predictions from consistent quasiparticle random phase approximation calculations. The theoretical predictions are in fair agreement with the experimental data. The E0 strength was also compared with results from antisymmetrized molecular dynamics calculations found in the literature. A few peaks in the experimental data might be associated with clustering in 24 Mg. Ground-state deformation effects were observed in the isoscalar giant monopole resonance (ISGMR) and isoscalar giant quadrupole resonance (ISGQR) distributions. The ISGMR strength is split in two peaks around 19 and 28 MeV. The ISGQR exhibits a pronounced peak at 20 MeV with a broadening at the low-energy region, similar to predictions from microscopic calculations. Signatures of excitation of cluster states were observed in the E0 response. Further studies including particle-decay measurements will be required to confirm the nature of the observed peaks.

20 ≤ A ≤ 38↗
DOE OSTI2021

The structure of low-lying 1 - states in 90,94 Zr from (α,α'γ) and (p,p'γ) reactions

The low-lying dipole strength in the 90,94 Zr nuclei was investigated via (ρ,ρ'γ) at 80 MeV and (α, α', γ) at 130 MeV. The experiments, made at RCNP, used the magnetic spectrometer Grand Raiden for the scattered particles and the array CAGRA with HPGe detectors for the γ-decay. For 94 Zr these are the first data for both reactions and for 90 Zr these are the first data with (ρ,ρ'γ) and the first ones at high resolution for (α, α', γ). The comparison of the present results for the two nuclei with existing (γ, γ') data shows that both nuclear probes produce an excitation pattern different than that of the electromagnetic probes. DWBA calculations were made using form factors deduced from transition densities, based on RPA calculations, characterized by a strong neutron component at the nuclear surface. A combined analysis of the two reactions was performed for the first time to investigate the isoscalar character of the 1 - states in 90,94 Zr. The (ρ,ρ'γ) cross section was calculated using values for the isoscalar electric dipole energy-weighted sum rule (E1 ISEWSR) obtained from the (α, α', γ) data. The isoscalar strength for 90 Zr was found to exhaust 20 ± 2.5% of the EWSR in the energy range up to 12 MeV. In case of 94 Zr, a strength of 9 ± 1.1% of the EWSR was found in the range up to 8.5 MeV. Although an overall general description was obtained in the studied energy intervals, not all proton cross sections were well reproduced using the isoscalar strength from (α, α', γ). This might suggest mixing of isoscalar and isovector components and that this mixing and the degree of collectivity are not the same for all the 1 - states below the particle binding energy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Reexamination of isoscalar giant resonances in 12 C and 93 Nb through 6 Li scattering

Inelastic Li 6 scattering at 100 MeV/u on C 12 and Nb 93 has been measured with the high-resolution magnetic spectrometer Grand Raiden. The magnetic-rigidity settings of the spectrometer covered excitation energies from 10 to 40 MeV and scattering angles in the range 0 ° < θ lab. < 2 ° . The isoscalar giant monopole resonance was selectively excited in the present data. Measurements free of instrumental background and the very favorable resonance-to-continuum ratio of Li 6 scattering allowed for precise determination of the E 0 strengths in C 12 and Nb 93 . Additionally, it was found that the monopole strength in C 12 exhausts 52 ± 3 (stat.) ± 8 (sys.) % of the energy-weighted sum rule (EWSR), which is considerably higher than results from previous α -scattering experiments. The monopole strength in Nb 93 exhausts 92 ± 4 (stat.) ± 10 (sys.) % of the EWSR, and it is consistent with measurements of nuclei with mass number of A ≈ 90 . Such comparison indicates that the isoscalar giant monopole resonance distributions in these nuclei are very similar, and no influence due to nuclear structure was observed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2017

Materials challenges for the fusion nuclear science facility

The phased development and component testing mission of the Fusion Nuclear Science Facility (FNSF) implies a unique scenario for the development of structural and plasma-facing materials. The phased development of the machine and the capability to periodically remove and replace power core sectors allows for the introduction of materials and components with progressively improved operating characteristics throughout the lifetime of the machine. In addition, the machine components removed at each operational phase will provide the first opportunity to test and examine materials irradiated to useful neutron fluences in a fully integrated fusion environment. In this paper, options for structural and plasma-facing materials are considered and a preliminary set of materials identified to meet the challenges of power core components and for the machine-lifetime components such as the vacuum vessel and the structural ring. Finally, the status of FNSF-relevant materials research and development within the US fusion material program is summarized, and future directions for developing advanced materials to enable the long-term missions of an FNSF are discussed.

42 ENGINEERING↗
DOE OSTI2017

Design, properties, and weldability of advanced oxidation-resistant FeCrAl alloys

FeCrAl alloys are promising as corrosion- and oxidation-resistance materials for extreme high-temperature applications. However, further alloy design and improvement requires a delicate balance between workability, weldability, propensity for '-phase formation, among other factors. Here, a series of advanced oxidant resistant FeCrAl alloys were produced and investigated. Variants with Al (+2%), Nb (+1%), and TiC (0.1, 0.3, and 1%) additions over the reference alloy (Fe-13%Cr-5%Al) were characterized in detail before and after controlled laser beam welding using tensile tests with digital image correlation, SEM-EBSD analysis, and fractography. All investigated alloys demonstrated yield stress in the weldment over 500 MPa; no welding-induced cracking was observed. However, it was shown that the increase in the Al-content over 5% was detrimental leading to a brittle fracture mechanism and decreased ductility in the weldment. At the same time, Nb and TiC additions were beneficial for preventing grain growth and reducing local softening (yield stress reduction) in the heat-affected zone. The 1% TiC addition also effectively refined grain size in the weldment.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Iron addiction: a novel therapeutic target in ovarian cancer

Ovarian cancer is a lethal malignancy that has not seen a major therapeutic advance in over 30 years. We demonstrate that ovarian cancer exhibits a targetable alteration in iron metabolism. Ferroportin (FPN), the iron efflux pump, is decreased, and transferrin receptor (TFR1), the iron importer, is increased in tumor tissue from patients with high grade but not low grade serous ovarian cancer. A similar profile of decreased FPN and increased TFR1 is observed in a genetic model of ovarian cancer tumor-initiating cells (TICs). The net result of these changes is an accumulation of excess intracellular iron and an augmented dependence on iron for proliferation. A forced reduction in intracellular iron reduces the proliferation of ovarian cancer TICs in vitro, and inhibits both tumor growth and intraperitoneal dissemination of tumor cells in vivo. Some mechanistic studies demonstrate that iron increases metastatic spread by facilitating invasion through expression of matrix metalloproteases and synthesis of interleukin 6 (IL-6). Here, we show that the iron dependence of ovarian cancer TICs renders them exquisitely sensitive in vivo to agents that induce iron-dependent cell death (ferroptosis) as well as iron chelators, and thus creates a metabolic vulnerability that can be exploited therapeutically.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2016

Development of 1100 °C Capable Alumina-Forming Austenitic Alloys

Recently dalumina-forming austenitic (AFA) alloys based on ~12–32 weight % (wt%) Ni have been developed and offer an attractive combination of oxidation resistance and creep resistance at relatively low alloy cost. But, they exhibit a transition to internal oxidation and nitridation of Al above ~750–950 °C depending on composition and exposure environment. In order to identify AFA compositions capable of higher-temperature operation for applications such as ethylene cracking, the oxidation behavior of a series of developmental, as-cast nominal Fe–(25–45)Ni–(10–25)Cr–(4–5)Al–1Si–0.15Hf–0.07Y–0.01B wt% base alloys with and without Nb, Ti, and C additions was evaluated at 1100 °C in air with 10% water vapor. Furthermore, we observed protective alumina scale formation at levels of 35Ni, 25Cr, and 4Al with additions of Nb and C, indicating promise for 1100°C capable cast AFA alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Development of cast alumina-forming austenitic stainless steels

Cast Fe-Ni-Cr chromia-forming austenitic stainless steels with Ni levels up to 45 wt. % are used at high temperatures in a wide range of industrial applications that demand microstructural stability, corrosion resistance, and creep strength. Although alumina scales offer better corrosion protection at these temperatures, designing cast austenitic alloys that form a stable alumina scale and achieve creep strength comparable to existing cast chromia-forming alloys is challenging. This work outlines the development of cast Fe-Ni-Cr-Al austenitic stainless steels containing about 25 wt. % Ni with good creep strength and the ability to form a protective alumina scale for use at temperatures up to 800 C - 850 C in H 2 O-, S-, and C- containing environments. Creep properties of the best alloy were comparable to that of HK-type cast chromia-forming alloy along with improved oxidation resistance typical of alumina-forming alloys. Lastly, challenges in the design of cast alloys and a potential path to increasing the temperature capability are discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Overview of the multifaceted activities towards development and deployment of nuclear-grade FeCrAl alloys

A large effort is underway under the leadership of US DOE Fuel Cycle Research program to develop advanced FeCrAl alloys as accident tolerant fuel (ATF) cladding to replace Zr-based alloys in light water reactors. The primary motivation is the excellent oxidation resistance of these alloys in high-temperature steam environments right up to their melting point (roughly three orders of magnitude slower oxidation kinetics than zirconium). A multifaceted effort is ongoing to rapidly advance FeCrAl alloys as a mature ATF concept. The activities span the broad spectrum of alloy development, environmental testing (high-temperature high-pressure water and elevated temperature steam), detailed mechanical characterization, material property database development, neutron irradiation, thin tube production, and multiple integral fuel test campaigns. Instead of off-the-shelf commercial alloys that might not prove optimal for the LWR fuel cladding application, a large amount of effort has been placed on the alloy development to identify the most optimum composition and microstructure for this application. The development program is targeting a cladding that offers performance comparable to or better than modern Zr-based alloys under normal operating and off-normal conditions. This paper provides a comprehensive overview of the systematic effort to advance nuclear-grade FeCrAl alloys as an ATF cladding in commercial LWRs. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2016

Thermochemical Compatibility and Oxidation Resistance of Advanced LWR Fuel Cladding

We assessed the thermochemical compatibility of potential replacement cladding materials for zirconium alloys in light water reactors. Considered were FeCrAl steel (similar to Kanthal APMT), Nb-1%Zr (similar to PWC-11), and a hybrid SiC-composite with a metallic barrier layer. The niobium alloy was also seen as requiring an oxidation protective layer, and a diffusion silicide was investigated. Metallic barrier layers for the SiC-composite reviewed included a FeCrAl alloy, Nb-1%Zr, and chromium. Thermochemical calculations were performed to determine oxidation behavior of the materials in steam, and for hybrid SiC-composites possible interactions between the metallic layer and SiC. Additionally, experimental exposures of SiC-alloy reaction couples at 673K, 1073K, and 1273K for 168 h in an inert atmosphere were made and microanalysis performed. Whereas all materials were determined to oxidize under higher oxygen partial pressures in the steam environment, these varied by material with expected protective oxides forming. Finally, the computed and experimental results indicate the formation of liquid phase eutectic in the FeCrAl-SiC system at the higher temperatures.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2016

Dependencies of α' Embrittlement in Neutron-Irradiated Model Fe-Cr-Al Alloys

Fe-Cr-Al alloys are currently under consideration as accident tolerant fuel cladding materials due to their superior performance in high temperature steam environments when compared to Zr-based alloys. These alloys have also shown promise for other nuclear reactor and power production applications due to their excellent high-temperature oxidation and corrosion resistance. However, like other high-Cr ferritic Fe-based alloys, these alloys are prone to radiation-induced hardening and embrittlement due to the precipitation of a Cr-rich-α' phase under typical LWR operating conditions. Additionally, the kinetics of this phase separation have been shown to be accelerated by irradiation. Current research efforts are focused on developing an ideal candidate Fe-Cr-Al alloy composition and microstructure that retains its exceptional environmental compatibility while maintaining adequate mechanical performance over the duration of its operational lifetime. The current work investigates both the composition and dose dependencies of α' phase precipitation, as it can be the primary contributor to radiation-induced hardening and embrittlement in these alloys. The comprehensive analysis of phase stability in irradiated Fe-Cr-Al alloys provided by this work is a key step forward in assessing the radiation tolerance and overall viability of these materials for accident tolerant fuel cladding applications. Additional work is underway to assess radiation-induced dislocation loop formation in these specimens and correlate the morphologies of both the dislocation loop and α' precipitate morphologies to the results of mechanical testing campaigns in order to fully develop the structure-property relationships for this class of alloys. Completion of this work will allow for a comprehensive evaluation of the suitability of Fe-Cr-Al alloys for nuclear applications and result in the recommendation of an optimized candidate alloy ideally suited for LWR environments. (authors)

36 MATERIALS SCIENCE↗