Search NASA⌕ Search

Engineering topics

Yan Chen

Publications and source records attributed to Yan Chen.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2019

Advances in Neural Network Detection and Retrieval of Multilayer Clouds for CERES Using Multispectral Satellite Data

An artificial neural network (ANN) algorithm, employing several Aqua MODIS infrared channels, the retrieved total cloud visible optical depth, and vertical humidity profiles is trained to detect multilayer (ML) ice-over-water cloud systems as identified by matched CloudSat and CALIPSO (CC) data. The multilayer ANN, or MLANN, algorithm is also trained to retrieve the optical depth and the top and base heights of the upper-layer ice clouds in ML systems. The trained MLANN was applied to independent MODIS data resulting in a combined ML and single layer hit rate of 80% (77%) for nonpolar regions during the day (night). The results are more accurate than currently available methods and the previous version of the MLANN. Upper-layer cloud top and base heights are accurate to ±1.2 km and ±1.6 km, respectively, while the uncertainty in optical depth is ±0.457 and ±0.556 during day and night, respectively. Areas of further improvement and development are identified and will be addressed in future versions of the MLANN.

CERES↗
NASA NTRS2007

A Multi-Year Data Set of Cloud Properties Derived for CERES from Aqua, Terra, and TRMM

The Clouds and Earth's Radiant Energy System (CERES) Project is producing a suite of cloud properties from high-resolution imagers on several satellites and matching them precisely with broadband radiance data to study the influence of clouds and radiation on climate. The cloud properties generally compare well with independent validation sources. Distinct differences are found between the CERES cloud properties and those derived with other algorithms from the same imager data. CERES products will be updated beginning in late 2006.

Minnis, Patrick↗
NASA NTRSDate not supplied

Examination of Regional Trends in Low Level Cloud Properties Found in the Aqua-MODIS Satellite Record

Clouds have a pronounced influence on the Earth?s climate. Relative to cloud free conditions, they cool the planet by increasing the amount of solar radiation reflected back to space and reducing the amount of sunlight reaching the surface, but they warm the planet by decreasing the amount of thermal infrared radiation escaping to space and increasing the amount reaching the surface (a greenhouse effect). The global mean net cloud radiative effect (CRE) is about -20 W/m2, a cooling effect at both the top-ofatmosphere and surface. Given the magnitude of CRE?s, it is expected that changes in cloud properties could be a significant factor in climate change due to anthropogenic forcing?s, yet cloud feedbacks are not well known and remain one of the largest uncertainties in climate prediction. This paper explores relationships between coincident observations of atmospheric aerosols, clouds and radiation derived from the Moderate Resolution Imaging Spectroradiometer (MODIS) and from the Clouds and the Earth?s Radiant Energy System (CERES) instruments on the Aqua satellite. We investigate several interesting regional trends that have emerged in the nearly 18-year satellite record that suggest correlation between changes in low-level cloud properties and changes in aerosol optical depth that may be associated with changes in pollution emissions and possibly with other factors. MERRA reanalysis of meteorological conditions and aerosol particulate species are investigated to help better understand the potential mechanisms responsible for the observed cloud property trends. Finally, we analyze a new CERES flux by cloud type dataset in order to try and isolate the associated trends in low-level cloud radiative effects. It is anticipated that this study using long-term observations of clouds, aerosols and radiative fluxes combined with model reanalysis data will contribute to an improved understanding of cloud climate feedbacks.

William L Smith Jr.↗
NASA NTRSDate not supplied

TPSAS-NF1676L-27483-DND

scene to retrieve their microphysical properties. The Clouds and the Earth's Radiant Energy System (CERES) Project uses the infrared channels (6.72 Âμm, 7.33 Âμm, 13.3 Âμm,13.6 Âμm, 13.9 Âμm, and 14.2 Âμm) available on the Terra and Aqua Moderate Resolution Imaging Spectroradiometers (MODIS) to build its algorithms to retrieval cloud properties. Unfortunately, The Visible Infrared Imaging Radiometer Suite (VIIRS) on board Suomi-NPP (National Polar-Orbiting Partnership) lacks these particular measurements. While conducting research using VIIRS data, it is desirable to bring these data into the VIIRS resolution. The Cross-track Infrared Sounder (CrIS), which is also on board Suomi-NPP, has these infrared channels. This paper describes a method to map the CrIS spectral radiances of CO2 and water vapor to VIIRS, with the mapping software in ATOVS and AVHRR Pre-processing (AAPP) package provided by Satellite Application Facilities for Numerical Weather Prediction (NWP SAF). This method is validated comparing mapped10.763 Âμm from CrIS with M15 from VIIRS. The mapped CO2 and water vapor channels were then created and combined with the conventional VIIRS product, as well as compared against corresponding channels of Aqua MODIS instrument.

Yan Chen↗
NASA NTRSDate not supplied

Cloud Macrophysical Changes Observed by MODIS, CALIPSO, and CloudSat for the 11-year Period

Using the Moderate Resolution Imaging Spectroradiometer (MODIS), Cloud–Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO), and CloudSatsatellitemeasurements, cloud macrophysicalchanges are examined from 2007 to 2017(Ham et al., 2021). Particularly, we compare cloud changes derived from MODIS passive sensor and CALIPSO-CloudSat (CALCS) combined active sensor measurements. Both MODIS and CALCS well capture general features of the cloud changes related to El Niño–Southern Oscillation (ENSO) events. However, because of better detections of thin cirrus clouds, CALCS cloud volume anomalies are better correlated with relative humidity anomalies, compared to MODIS. In addition, MODIS observations show a stronger anticorrelation between low and mid/high cloud volume anomalies, compared to CALCS, mainly due to limitations in detecting overlapping clouds by MODIS passive sensor.In addition, the geometrical thickness of MODIS mid/high clouds is thinner than that from CALCS, less affecting cloud amounts at 0-3 km altitude.

Cloud↗
NASA NTRSDate not supplied

Shortwave Broadband Irradiance Computations Using Cloud Properties Combined from CALIPSO, CloudSat, and MODIS

In this study, cloud properties measured from the CALIPSO, CloudSat, and MODIS (CCM) are used for top-of-atmosphere (TOA) shortwave (SW) broadband (BB) irradiance computations. The CALIPSO and CloudSat active sensors provide detailed cloud vertical profiles, but these occasionally miss parts of the cloud columns due to the full attenuation of sensor signals, surface clutter, or insensitivity to a certain range of cloud particle sizes. As a result, the CCM-merged cloud extinction coefficient profiles can be underestimated. Therefore, we compare the column-integrated visible scaled cloud optical depth (VSCOD) of the CCM-merged cloud extinction coefficient profile with the MODIS-estimated VSCOD and apply a scaling factor to the CCM-merged cloud extinction profile. The VSCOD is defined as a visible cloud optical depth multiplied by (1¬–asymmetry parameter). The SW irradiances are computed using the scaled CCM-merged cloud extinction coefficient and effective radius profiles. It is shown that the multi-sensor-combined cloud profiles significantly reduce positive TOA SW BB biases, compared to those with MODIS-derived cloud properties only. The improvement is more pronounced for optically thick clouds, where MODIS ice particle effective radius is largely underestimated.

Cloud↗
NASA NTRSDate not supplied

Different Features of Cloud Macrophysical Changes Observed by MODIS, CALIPSO, and CloudSat for the 11-Year Period

From the A-train satellite mission, more than 11 years of Cloud–Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO), and CloudSat satellite measurements are available from 2007 to 2017. In this study, we examine cloud macrophysical changes from a passive sensor, Moderate Resolution Imaging Spectroradiometer (MODIS), and two active sensors, CALIPSO and CloudSat (CALCS). MODIS and CALCS capture common features of the cloud changes related to El Niño–Southern Oscillation (ENSO) events, i.e., increase of low clouds during La Niña and increase of mid and high clouds during El Niño over the eastern Pacific. However, optically thin cirrus clouds are well detected by CALCS while these are often missed by MODIS. As a result, MODIS shows much flatter distributions of cloud top heights. In addition, compared to MODIS, CALCS cloud volume anomalies are better correlated with relative humidity anomalies. The differences between MODIS and CALCS appear in low cloud variations. Particularly, fluctuations in MODIS low cloud anomalies are larger than CALCS, and MODIS low cloud anomalies are anticorrelated with mid/high cloud anomalies. This is because of the limitation in detecting underlying clouds by MODIS passive sensor. Also, the layer thickness of MODIS mid/high clouds is thinner than that from CALCS, less affecting cloud amounts at 0-3 km altitude.

Cloud↗
NASA NTRSDate not supplied

Toward Consistent Long-term Records of Cloud Fraction from MODIS and VIIRS for CERES

In order to produce a long-term and stable climate record of Earth’s energy budget for NASA’s Clouds and Earth’s Radiant Energy System (CERES) project, a consistent cloud fraction record across different measurement platforms­­ is a crucial first step. As Aqua satellite is approaching the end of its operational lifetime, NOAA-20 VIIRS observations on the JPSS-2 spacecraft will be used for cloud detection to continue the long-term Earth energy budget record. Two steps are designed to achieve this goal. The first step is a quick approach that revises the CERES NOAA-20 VIIRS Edition 1 A (CV Ed1A) cloud mask to incorporate Cross-track Infrared Sounder (CrIS) water vapor and CO_2 channels into the VIIRS cloud mask (CV Ed1B) to produce a consistent cloud fraction with CERES MODIS Edition 4 (CM Ed4) to avoid potential discontinuity when Aqua orbit drifts beyond tolerance before the next Edition is completed. The second step is to develop, as part of CERES next edition (Ed5), a unified MODIS and VIIRS cloud mask using common channels to produce consistent cloud products with improved radiative transfer models, refined clear sky predictions, new GMAO reanalysis products, and the latest radiance collections of MODIS and VIIRS data. This poster will present cloud fraction comparison between CV Ed1B and CM Ed4, as well as the preliminary results of ongoing Ed5 including pixel level cloud mask results, monthly global cloud fraction differences between MODIS and VIIRS (consistency), and initial validation using CALIPSO data (accuracy).

CERES↗
NASA NTRSDate not supplied

Development of a Consistent MODIS and VIIRS Cloud Detection Approach for CERES

A consistent cloud fraction record across various satellite platforms is essential for maintaining a long-term and stable climate data record of Earth's energy budget. With the Aqua satellite nearing the end of its operational lifetime, the continuation of this record relies on utilizing VIIRS observations from NOAA20 for cloud detection in NASA’s Clouds and Earth’s Radiant Energy System (CERES) project. However, integrating data from VIIRS and MODIS instruments poses challenges due to their distinct characteristics, such as varying spatial resolutions and different spectral channels. As a result, deriving consistent cloud properties from these two sensors without introducing artificial discontinuities in the time series remains a complex and challenging task. This paper will present progress toward developing a unified MODIS and VIIRS cloud mask using common channels to produce consistent cloud properties for CERES next edition (Ed5) Earth radiation budget data products. The fundamental approach taken in the CERES cloud mask is to compare the observed radiances to the expected background clear sky radiances. Therefore, one vital step is to compute clear sky radiances with a radiative transfer model that accurately accounts for satellite-specific, spectrally dependent surface reflectance, surface emission, and atmospheric absorption. Refined radiative transfer models and updated ancillary data inputs including surface emissivity maps, IGBP, snow and ice maps are incorporated into the processing framework to improve cloud detection consistency and accuracy. Pixel level cloud mask results and monthly global cloud fraction comparisons between MODIS and VIIRS will be presented to evaluate their consistency. Remaining challenges will be discussed. It is expected that this work will contribute consistent cloud properties for CERES that adequately bridges the MODIS and VIIRS imager data records.

CERES↗
NASA NTRSDate not supplied

Seasonal Surface Spectral Emissivity Derived From MODIS Data

Surface emissivity is essential for many remote-sensing applications including the retrieval of surface skin temperature from satellite-based infrared measurements, the determination of cloud detection thresholds, and the estimation of the surface longwave radiation emission, an important component of the energy budget of the surface-atmosphere interface. The CERES (Clouds and the Earth’s Radiant Energy System) Project is measuring broadband shortwave and longwave radiances and deriving cloud properties from the MODIS on Terra and Aqua and from the VIIRS on NOAA-19 and NOAA-20 orbiters to produce combined global radiation and cloud property data sets. Zhou et al. (IEEE Trans. Geosci. Remote Sens., 49, 2011) used Infrared Atmospheric Sounding Interferometer (IASI) data to create a high spectral resolution surface emissivity atlas for remote sensing and modeling applications. The IASI measures spectral radiances between 3.62 and 15.5 μm. The VIIRS I4 channel width is from 3.55 to 3.93 μm, while MODIS Band 20 is from 3.66 to 3.84 m. Comparisons of top-of-atmosphere (TOA) radiance calculations with MODIS and VIIRS observations for these bands relative to bands in the mid-infrared suggest that the IASI emissivity atlas near 3.7 µm may not be suitable for CERES cloud retrievals. In this paper, the IASI emissivities for the VIIRS and MODIS bands centered near 11m are used to derive surface skin temperature from nighttime MODIS/VIIRS data. The Goddard Earth Observing System for Instrument Teams (GEOS-IT) numerical weather analyses provide temperature and water vapor profiles fused to correct the observed radiances for atmospheric absorption and emission. Global seasonal emissivity maps are then derived for the VIIRS and MODIS 3.7-m bands that are consistent with the derived skin temperatures and the observed TOA radiances. These seasonal climatology maps are validated and will be used in CERES Edition 5 and other CERES-related cloud retrieval algorithms to provide improved clear-sky radiances and derived cloud properties.

Surface Emissivity↗