Engineering topics

Yan Soldo

Publications and source records attributed to Yan Soldo.

5 records

NASA NTRS2021

Study of a Strong RFI Source at L-Band Using SMAP Radiometer Data

This paper presents an analysis of Radio Frequency Interference (RFI) in the 1.400-1.427 GHz frequency band. The study considers the sudden and strong increase of interference from a particular emitter in China that has been observed in July 2020 by radiometers from both ESA's SMOS (Soil Moisture Ocean Salinity) and NASA's SMAP (Soil Moisture Active Passive) missions. It provides an example of the characterization of a source of RFI and illustrates the capabilities of the SMAP radiometer receiver and RFI processing incorporated in it to identify and understand interference.

Radio Frequency Interface↗

NASA NTRS2021

Study of a Strong L-Band RFI Source

CN006 is the name given by the European Space Agency (ESA) in their reports on radio frequency interference (RFI) to an instance of RFI in the L-band spectral window at 1.413 GHz protected for passive use only. The source of the interference is located east of the Chinese city of Hangzhou in an area with radar installations. Its effect was initially indistinguishable from that of many such RFI sources observed by the ESA's SMOS and NASA's Soil Moisture Active Passive (SMAP) radiometers over China. However, in July 2020, the level of radiation increased dramatically reaching levels exceeding 1700000 K as reported by Soil Moisture and Ocean Salinity (SMOS) becoming the strongest source observed by SMOS. This article describes an analysis of this very strong source (a radar). It provides information to provide insight into an example of a well-defined source of RFI and illustrates the powerful capability of the SMAP radiometer receiver and RFI processing incorporated in it for identifying and understanding interference.

Radio Frequency Interface↗

NASA NTRS2021

Characteristics of the RFI Environment at L-band as Observed from SMAP

This manuscript presents some characteristics of RFI sources as they were observed by the SMAP L-band radiometer. Knowledge of the nature of RFI can help improve design of future detection algorithms. For example, observations with airborne instruments demonstrating the pulse-like nature of RFI in the protected L-band spectrum at 1.413 GHz (attributed to air-traffic control radar) informed the design of the Aquarius radiometer and its RFI detection algorithm. The experience of Aquarius and SMOS in space led to the advanced detection system on SMAP. The fully polarimetric SMAP radiometer with spectral and time domain processing, provides sophisticated detection but also the opportunity to look at the temporal and spectral characteristics of the L-band RFI globally. The examples and categorization presented are based on a global sample but over a limited time. They are not meant to be complete. Rather, they are intended to provide insight into the time-frequency characteristics of RFI with the goal that knowledge of the characteristics can help improve detection in future missions.

Yan Soldo↗

NASA NTRS2020

Spurious Signal in SMAP Fourth Stokes Parameter

The radiometer on the NASA Soil Moisture Active/Passive (SMAP) mission is a fully polarimetric instrument that operates at L-band in the spectrum window at 1400-1427 MHz protected for passive use only. A unique feature of the radiometer is the fully digital back-end which permits direct computation of the third and fourth Stokes parameters: the real and imaginary part of the correlation of signal at horizontal and vertical polarizations, respectively. In particular, the SMAP conical scanning geometry provides the opportunity to look at the global distribution of the fourth Stokes parameter, TA4, at constant incidence angle (40°). A striking feature of TA4 is the existence of a strong (±10 K) spurious signal at coastlines. This article provides examples of the spikes and an explanation of the cause. Simulations have shown that the spurious signal is associated with antenna imperfections, such as cross polarization coupling and phase mismatch between polarizations.

radiometry↗

NASA NTRS2020

Retrieval of RFI Characteristics Using L-Band Satellite Data

Radio-frequency interference (RFI) has had a detrimental effect on L-band passive observatories such as SMOS, Aquarius and SMAP. A better knowledge of the characteristics of RFI signals might help mitigate this issue by leading to additional and better focused RFI detection algorithms and it might help identify RFI emitters on the ground. In this study we present approaches to retrieve some of the features of the RFI signals using SMAP data and we present some statistical considerations about the temporal and spectral characteristics of RFI sources.

Yan Soldo↗