Search NASA⌕ Search

Engineering topics

Yan, Pengfei

Publications and source records attributed to Yan, Pengfei.

At least 19 records

Electron energy levels determining cathode electrolyte interphase formation

Cathode electrolyte interphase (CEI) has a significant impact on the performance of rechargeable batteries and is gaining increasing attention. Understanding the fundamental and detailed CEI formation mechanism is of critical importance for battery chemistry. Herein, a diverse of characterization tools are utilized to comprehensively analyze the composition of the CEI layer as well as its formation mechanism by LiCoO 2 (LCO) cathode. We reveal that CEI is mainly composed of the reduction products of electrolyte and it only parasitizes the degraded LCO surface which has transformed into a disordered spinel structure due to oxygen loss and lithium depletion. Based on the energy diagram and the chemical potential analysis, the CEI formation process has been well explained, and the proposed CEI formation mechanism is further experimentally validated. This work highlights that the CEI formation process is nearly identical to that of the anode-electrolyte-interphase, both of which are generated due to the electrolyte directly in contact with the low chemical potential electrode material. This work can deepen and refresh our understanding of CEI.

LiCoO2↗

High capacity and stable cathode materials

High energy density cathode materials, such as LiNixMnyCozO2 (NMC) cathode materials, with improved discharge capacity (hence energy density) and enhanced cycle life are described. A solid electrolyte, such as lithium phosphate infused inside of secondary particles of the cathode material demonstrates significantly enhanced structural integrity without significant or without any observable particle cracking occurring during charge/discharge processes, showing high capacity retention of more than 90% after 200 cycles at room temperature. In certain embodiments the disclosed cathode materials (and cathodes made therefrom) are formed using nickel-rich NMC and/or are used in a battery system with a non-aqueous dual-Li salt electrolytes.

25 ENERGY STORAGE↗

Controlling Surface Phase Transition and Chemical Reactivity of O3-Layered Metal Oxide Cathodes for High-Performance Na-Ion Batteries

O3-layered metal oxides are promising cathode materials for high-energy Na-ion batteries (SIBs); however, they suffer from fast capacity fade. In this work, we develop a high-performance O3-NaNi 0.68 Mn 0.22 Co 0.10 O 2 cathode for SIBs toward practical applications by suppressing the formation of a rock salt layer at the cathode surface with an advanced electrolyte. The cathode can deliver a high specific capacity of ~196 mAh g –1 and demonstrates >80% capacity retention over 1000 cycles. NaNi 0.68 Mn 0.22 Co 0.10 O 2 –hard carbon full-cells with practical loading (>2.5 mAh cm –2 ) and lean electrolyte (~40 μL) demonstrate ~82% capacity retention after 450 cycles. A 60 mAh single-layer pouch cell has also been fabricated and demonstrated stable performance. This work represents a significant leap in SIB development and brings new insights to the development of advanced layered metal oxide cathodes for alkaline-ion batteries.

25 ENERGY STORAGE↗

Revealing the Atomic Origin of Heterogeneous Li-Ion Diffusion by Probing Na

Tracing the dynamic process of Li-ion transport at the atomic scale is a long-cherished wish in solid state ionics and essential for battery material engineering. Approaches via phase change, strain, and valence states of redox species are developed to circumvent the technical challenge of direct imaging Li, however, all are limited by poor spatial resolution and weak correlation with state-of-charge (SOC). Here, we adopt an ion-exchange approach by sodiating the de-lithiated cathode and probing Na distribution to trace the Li de-intercalation, which enables us to visualize the heterogeneous Li-ion diffusion down to atomic level. In the model LiNi1/3Mn1/3Co1/3O2 cathode, dislocation-mediated ion diffusion is kinetically favorable at low SOC and planar diffusion along (003) layers dominates at high SOC, which work synergistically to determine the ion diffusion dynamics. Our work unveils the heterogeneous nature of ion diffusion in battery material and stresses the role of defect engineering in tailoring ion transport kinetics.

Xiao, Biwei↗

Injection of oxygen vacancies in the bulk lattice of layered cathodes

Surfaces, interfaces, and grain boundaries are, classically, known to be sinks at which defects generated within bulk lattice will preferentially migrate to and get annihilated, therefore rejuvenating a crystalline lattice to restore the intended functionalities.1, 2, 3 Here we report an inverse case by which the defects generated at the particle surface are continuously pumped into the bulk lattice and consequentially compromising the intended functionalities. We discovered that during the operation of a rechargeable battery, oxygen vacancies generated at cathode particle surfaces migrate toward inside of a perfect lattice in lithium-rich layered cathodes, featuring electrochemical driven surface vacancy creation, injection and condensation phenomenon and revealing an unrecognized surface process induced bulk lattice degradation featured with void formation and lattice reorganization. This process is associated with a high-cutoff voltage at which the anionic redox is activated. Coupling with calculations, we substantiate that triggering of anionic redox leads to sharply lowering of both formation energy of oxygen vacancy and migration barrier of oxidized oxide ions, therefore enabling migration of oxygen vacancy via oxidized oxide ion and leading to the injection of oxygen vacancy generated at the particle surface into the bulk lattice. This work unveils unpredicted behavior of oxidized oxide ion, leading to essential insight for designing of high capacity cathode for better batteries through coupled cationic and anionic redox dynamics in layered cathodes. In a broad term, this work provides insight on the intimate coupling between interfacial process and bulk lattice behavior for governing electrode functionality.

Yan, Pengfei↗

High capacity and stable cathode materials

High energy density cathode materials, such as LiNiXMnYCoZO2 (NMC) cathode materials, with improved discharge capacity (hence energy density) and enhanced cycle life are described. A solid electrolyte, such as lithium phosphate infused inside of secondary particles of the cathode material demonstrates significantly enhanced structural integrity without significant or without any observable particle cracking occurring during charge/discharge processes, showing high capacity retention of more than 90% after 200 cycles at room temperature. In certain embodiments the disclosed cathode materials (and cathodes made therefrom) are formed using nickel-rich NMC and/or are used in a battery system with a non-aqueous dual-Li salt electrolytes.

25 ENERGY STORAGE↗

Effect of Calcination Temperature on the Electrochemical Properties of Nickel-rich LiNi0.76Mn0.14Co0.10O2 Cathodes for Lithium-ion Batteries

High energy density nickel (Ni)-rich layered LiNixMnyCozO2 (NMC, x = 0.6) materials are promising cathodes for lithium-ion batteries. However, several technical challenges, such as fast capacity fading, are hampering their large scale application. Herein, we demonstrate that a Ni-rich cathode LiNi0.76Mn0.14Co0.10O2 (NMC76) calcined at an optimal temperature of 750~775oC exhibits a high discharge capacity (~215 mAh g-1 when charged to 4.5 V) and an excellent high rate capability. Even at a 10C rate, it still exhibits a capacity of more than 160 mAh g-1 and retains ca. 79% of its initial capacity after 200 cycles. The high performance of NMC76 is directly related to its optimized primary particle size (that constitute the spherical secondary particles of >10 m) and cation mixing. Higher calcination temperature (= 800 oC) leads to rapid increase of primary particle size, poor cycling stability, and inferior rate capability of NMC76 due to its severe micro strain and crack formation upon repeated lithium ion de/intercalations. Therefore, NMC76 calcined at 750~775oC is a very good candidate for the next generation of Li ion batteries.

nickel-rich cathodes, calcination temperature, cyc↗

Coupling of electrochemically triggered thermal and mechanical effects to aggravate failure in a layered cathode

Electrochemically driven functioning of a battery inevitably induces thermal and mechanical effects, which in turn couple with the electrochemical effect and collectively govern the performance of the battery. However, such a coupling effect, whether favorable or detrimental, has never been explicitly elucidated. Here we use in situ transmission electron microscopy to demonstrate such a coupling effect. We discover that thermally perturbating delithiated LiNi 0.6 Mn 0.2 Co 0.2 O 2 will trigger explosive nucleation and propagation of intragranular cracks in the lattice, providing us a unique opportunity to directly visualize the cracking mechanism and dynamics. We reveal that thermal stress associated with electrochemically induced phase inhomogeneity and internal pressure resulting from oxygen release are the primary driving forces for intragranular cracking that resembles a “popcorn” fracture mechanism. The present work reveals that, for battery performance, the intricate coupling of electrochemical, thermal, and mechanical effects will surpass the superposition of individual effects.

25 ENERGY STORAGE↗

Minimizing Polysulfide Shuttle Effect in Lithium-Ion Sulfur Batteries by Anode Surface Passivation

Lithium-ion sulfur batteries use non-metal materials as the anode to address safety concerns associated with lithium metal anode. However, polysulfide shuttle reactions still occur on the non-metal anode (such as graphite and Si), and result in limited battery efficiency. In this work, we used Al2O3 layers coated by atomic layer deposition (ALD) technique to suppress the shuttle reactions. With the optimal thickness of 2 nm Al2O3 coated on graphite anode, the Coulombic efficiency of the sulfur cathode was improved from 84% to 96% in the first cycle, and from 94% to 97% in the subsequent cycles. As a result, the discharge capacity of the sulfur cathode was increased to 550 mAh g-1 in the 100th cycle, as compared with 440 mAh g-1 when the pristine graphite anode was used. The Al2O3 passivation layer minimizes the formation of insoluble polysulfide (Li2S2, Li2S) on the surface of graphite anode and improves the efficiency and capacity retention of the graphite-sulfur batteries. The surface passivation strategy could also be used in other Li sulfur battery systems (with Li, Si, and Sn anodes), to minimize side reactions and enable high-performance and safe sulfur batteries.

Liu, Jian↗

Creation And Ordering Of Oxygen Vacancies At WO3-d And Perovskite Interfaces

Changes in structure and composition resulting from oxygen deficiency can strongly impact the physical and chemical properties of transition metal oxides. However, it is extremely difficult to accurately characterize the oxygen deficiency levels and pinpoint how these materials properties change in response. In this paper, the effects of substrate strain and oxidizing power on the creation and distribution of oxygen defects in WO3 thin films are investigated in detail. An 18O2 isotope labeled time-of-flight secondary ion mass spectrometry (ToF-SIMS) study reveals that WO3-films grown on STO display a significantly larger oxygen vacancy gradient along the growth direction. This result is corroborated by scanning transmission electron microscopy (STEM) images which reveal a large number of defects present close to the interface to accommodate interfacial strain, leading to ordering of oxygen vacancies and formation of semi-aligned Magnéli phases. The strain is gradually released and tetragonal phase with much better crystallinity is observed at the film/vacuum interface. The changes in structure resulting from oxygen defect creation are shown to have a direct impact on the electronic and optical properties of the films.

Zhang, Kelvin H.↗

Atomic Origins of Water-Vapour-Promoted Alloy Oxidation

The presence of water vapor, intentional or unavoidable, is crucial to many materials applications, such as steam generator, turbine engine, fuel cell, catalyst, and corrosion 1-6. Phenomenologically, water vapor has been noticed to accelerate oxidation of metals/alloys 7,8, however, the atomistic mechanisms remain elusive. Herein, through direct in situ atomic-scale transmission electron microscopy observation and density functional theory calculation, we reveal that water vapor enhanced oxidation of Ni-Cr alloy is associated with proton dissolution promoted vacancy formation, migration and clustering. Protons derived from water dissociation occupy interstitial position in the oxide lattice, which consequently leads to the lowering of both vacancy formation energy and the cation diffusion barrier. The atomic scale observations reveal a water vapor derived proton mediated oxide growth mechanism, which provides insights for reckoning many technological processes concerning materials in moist environment at elevated temperatures.

Luo, Langli (ORCID:000000026311051X)↗

Pushing the limit of layered transition metal oxide cathodes for high-energy density rechargeable Li ion batteries

Development of advanced high energy density lithium ion batteries is important for promoting electromobility. Making electric vehicles attractive and competitive compared to conventional automobiles depends on the availability of reliable, safe, high power, and highly energetic batteries whose components are abundant and cost effective. Nickel rich Li[Ni x CoyMn 1–x–y ]O 2 layered cathode materials (x > 0.5) are of interest because they can provide very high specific capacity without pushing charging potentials to levels that oxidize the electrolyte solutions. However, these cathode materials suffer from stability problems. In this work, we discovered that doping these materials with tungsten (1 mol%) remarkably increases their stability due to a partial layered to cubic (rock salt) phase transition. We demonstrate herein highly stable Li ion battery prototypes consisting of tungsten-stabilized Ni rich cathode materials (x > 0.9) with specific capacities >220 mA h g -1 . This development can increase the energy density of Li ion batteries more than 30% above the state of the art without compromising durability.

25 ENERGY STORAGE↗

Tuning piezoelectric properties through epitaxy of La 2 Ti 2 O 7 and related thin films

Current piezoelectric sensors and actuators are limited to operating temperatures less than ~200ºC due to the low Curie temperature of the piezoelectric material. The strengthening the piezoelectric coupling of high-temperature piezoelectric materials, such as La 2 Ti 2 O 7 (LTO), would allow sensors to operate across a broad temperature range. The crystalline orientation and piezoelectric coupling direction of LTO thin films can be controlled by epitaxial matching to SrTiO 3 (001), SrTiO 3 (110), and rutile TiO 2 (110) substrates via pulsed laser deposition. The structure and phase purity of the films are investigated by x-ray diffraction and scanning transmission electron microscopy. Piezoresponse force microscopy is used to measure the in-plane and out-of-plane piezoelectric coupling in the films. The strength of the out-of-plane piezoelectric coupling can be increased when the piezoelectric direction is rotated partially out-of-plane via epitaxy. The strongest out-of-plane coupling is observed for LTO/STO(001). Deposition on TiO 2 (110) results in epitaxial La 2/3 TiO 3 , an orthorhombic perovskite of interest as a microwave dielectric material and an ion conductor. La 2/3 TiO 3 can be difficult to stabilize in bulk form, and epitaxial stabilization on TiO 2 (110) is a promising route to realize La 2/3 TiO 3 for both fundamental studies and device applications. Overall, these results confirm that control of the crystalline orientation of epitaxial LTO-based materials can govern the resulting functional properties.

36 MATERIALS SCIENCE↗

Enhanced Cyclability of Lithium-Oxygen Batteries with Electrodes Protected by Surface Films Induced via In Situ Electrochemical Process

Although the rechargeable lithium-oxygen (Li-O2) batteries have extremely high theoretical specific energy, the practical application of these batteries is still limited by the instability of their carbon-based air-electrode, Li metal anode, and electrolytes towards reduced oxygen species. Here we demonstrate a simple one-step in-situ electrochemical pre-charging strategy to generate thin protective films on both carbon nanotubes (CNTs) air-electrode and Li metal anode simultaneously under an inert atmosphere. Li-O2 cells after such pre-treatment demonstrate significantly extended cycle life of 110 and 180 cycles under the capacity-limited protocol of 1000 mAh g-1 and 500 mAh g-1, respectively, which is far more than those without pre-treatment. The thin-films formed from decomposition of electrolyte during in-situ electrochemical pre-charging process in an inert environment can protect both CNTs air-electrode and Li metal anode prior to conventional Li-O2 discharge/charge cycling where reactive reduced oxygen species are formed. This work provides a new approach for protections of carbon-based air-electrode and Li metal anode in practical Li-O2 batteries, and may also be applied to other battery systems.

Environmental Molecular Sciences Laboratory↗

Multimodal and In-Situ Chemical Imaging of Critical Surfaces and Interfaces in Li Batteries

Interfaces play a critical role in the properties and lifetime of current generation and advanced batteries. However, detailed characterization of the critical interfaces during battery operation which can enable performance improvements and improved design has been a significant challenge requiring innovative technique development and creative experiments. This paper describes ways that information from a range of microscopy, spectroscopy, and spectrometry tools can be used to address important challenges associated with energy storage science and technology, in particular the development of advanced batteries for consumer use, transportation, , and renewable storage. Expanding the types of measurements that can be made on operational model batteries has significantly expanded the type and quality of information that can be obtained. This paper first shows examples of approaches being used to collect in situ transmission electron microscopy (TEM), secondary ion mass spectrometry (SIMS) and x-ray photoelectron spectroscopy data. The final section of the paper briefly shows two examples: the use of in situ XPS to examine SEI layers and a variety of methods including scanning TEM, atom probe tomography, scanning transmission x-ray microscopy (STXM), and x-ray adsorption near edge spectroscopy to understanding improve the performance of layered lithium transition metal oxide (LTMO) cathodes .

interface analysis, batteries in situ method, batt↗

Rock-Salt Growth-Induced (003) Cracking in a Layered Positive Electrode for Li-Ion Batteries

For the first time, the (003) cracking is observed and determined to be the major cracking mechanism for the primary particles of Ni-rich layered dioxides as the positive electrode for Li-ion batteries. Using transmission electron microscopy techniques, here we show that the propagation and fracturing of platelet-like rock-salt phase along the (003) plane of the layered oxide are the leading cause for the cracking of primary particles. The fracturing of the rock-salt platelet is induced by the stress discontinuity between the parent layered oxide and the rock-salt phase. The high nickel content is considered to be the key factor for the formation of the rock-salt platelet and thus the (003) cracking. The (003)-type cracking can be a major factor for the structural degradation and associated capacity fade of the layered positive electrode.

Environmental Molecular Sciences Laboratory↗