Synthesis and Characterization of Magnesium-Alloyed Hematite Thin Films
Abstract not provided
Engineering topics
Publications and source records attributed to Yan, Yanfa.
Abstract not provided
Abstract not provided
Abstract not provided
CuxS is one of the most promising solar cell absorber materials that has the potential to replace the leading thin-film solar cell material Cu(In,Ga)Se2 for high efficiency and low cost. In the past, solar cells based on CuxS have reached efficiency as high as 10%, but it also suffers serious stability issues. To further improve its efficiency and especially the stability, it is important tounderstand the stability and electronic structure of CuxS. However, due to the complexity of their crystal structures, no systematic theoretical studies have been carried out to understand the stability and electronic structure of the CuxS systems. In this work, using first-principles method, we have systematically studied the crystal and electronic band structures of CuxS (1.25 < x </= 2).For Cu2S, we find that all the three chalcocite phases, i.e., the low-chalcocite, the high-chalcocite, and the cubic-chalcocite phases, have direct bandgaps around 1.3-1.5 eV, with the low-chalcocite being the most stable one. However, Cu vacancies can form spontaneously in these compounds, causing instability of Cu2S. We find that under Cu-rich condition, the anilite Cu1.75S is the most stablestructure. It has a predicted bandgap of 1.4 eV and could be a promising solar cell absorber.
Using band symmetry analysis and density functional theory calculations, we reveal the origin of why oxygen vacancy (V{sub O}) energy levels are shallow in some ABO{sub 3} perovskites, such as SrTiO{sub 3}, but are deep in some others, such as LaAlO{sub 3}. We show that this diverse behavior can be explained by the symmetry of the perovskite structure and the location (A or B site) of the metal atoms with low d orbital energies, such as Ti and La atoms. When the conduction band minimum (CBM) is an antibonding {Gamma}12 state, which is usually associated with the metal atom with low d orbital energies at the A site (e.g., LaAlO{sub 3}), then the V{sub O} energy levels are deep inside the gap. Otherwise, if the CBM is the nonbonding {Gamma}25{prime} state, which is usually associated with metal atoms with low d orbital energies at the B site (e.g., SrTiO{sub 3}), then the V{sub O} energy levels are shallow and often above the CBM. The V{sub O} energy level is also deep for some uncommon ABO{sub 3} perovskite materials that possess a low s orbital, or large-size cations, and an antibonding {Gamma}{sub 1} state CBM, such as ZnTiO{sub 3}. Our results, therefore, provide guidelines for designing ABO{sub 3} perovskite materials with desired functional behaviors.
ZnO thin films have been deposited in mixed Ar/N{sub 2} gas ambient at substrate temperature of 500 C by radiofrequency sputtering of ZnO targets. We find that an optimum N{sub 2}-to-Ar ratio in the deposition ambient promotes the formation of well-aligned nanorods. ZnO thin films grown in ambient with 25% N{sub 2} gas flow rate promoted nanorods aligned along c-axis and exhibit significantly enhanced photoelectrochemical (PEC) response, compared with ZnO thin films grown in an ambient with different N{sub 2}-to-Ar gas flow ratios. Our results suggest that chamber ambient is critical for the formation of aligned nanostructures, which offer potential advantages for improving the efficiency of PEC water splitting for H{sub 2} production.
Using a combination of density functional theory calculation and materials synthesis and characterization we examine the properties of charge-compensated Ti and Mg co-alloyed hematite thin films for the application of photoelectrochemical (PEC) water splitting. We find that the charge-compensated co-alloying results in the following effects: (1) It enhances the solubility of Mg and Ti, which leads to reduced electron effective mass and therefore increased electron mobility; (2) It tunes the carrier density and therefore allows the optimization of electrical conductivity; and (3) It reduces the density of charged defects and therefore reduces carrier recombination. As a result, the Ti and Mg co-alloyed hematite thin films exhibit improved water oxidation photocurrent magnitudes as compared to pure hematite thin films. Our results suggest that charge-compensated co-alloying is a plausible approach for engineering hematite for the application of PEC water splitting.
A new SnO{sub 2}(ZnO:Sn){sub m} polytypoid nanowire has been synthesized through a two-step chemical vapor deposition (CVD) method. Cs-corrected scanning transmission electron microscopy (STEM) studies indicate the crystal structure consists of an alternating stack of a Sn-O octahedral layer and a (Sn/Zn)-O wurtzite slab. First-principles density-functional theory (DFT) calculations suggest Sn atoms in the Sn-doped ZnO slabs have both 4- and 6-fold coordination, forming an inversion boundary of polarity. The SnO{sub 2}(ZnO:Sn){sub m} nanowires may exhibit unique anisotropic electronic properties: poor conductivity along the wire axis, but metallic conductivity along the diametrical directions according to the calculations.
The crystal and electronic band structures of Cu{sub x}S(1.25 < x {le} 2) are systematically studied using the density-functional theory method. For Cu{sub 2}S, all the three chalcocite phases, i.e., the low-chalcocite, the high-chalcocite, and the cubic-chalcocite phases have direct band gaps around 1.3-1.5 eV, with the low-chalcocite being the most stable one. However, Cu vacancies can form spontaneously in these compounds, causing instability of Cu{sub 2}S. We find that under Cu-rich condition, the anilite Cu{sub 1.75}S is the most stable structure. It has a predicted band gap of 1.4 eV and could a promising solar cell absorber.
Abstract not provided
We have synthesized pure and Ti-alloyed hematite thin films on F doped SnO{sub 2} coated glass substrates by radio frequency magnetron co-sputtering of iron oxide and titanium targets in mixed Ar/O{sub 2} and mixed N{sub 2}/O{sub 2} ambient. We found that the hematite films deposited in the N{sub 2}/O{sub 2} ambient exhibit much poorer crystallinity than the films deposited in the Ar/O{sub 2} ambient. We determined that Ti alloying leads to increased electron carrier concentration and crystallinity, and reduced bandgaps. Moreover, Ti-alloyed hematite thin films exhibited improved photoelectrochemical performance as compared with the pure hematite films: The photocurrents were enhanced and the photocurrent onset shifted to less positive potentials.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
The performance of thin-film solar cells is influenced by the quality of interfaces and formation of defects such as point defects, stacking faults, twins, dislocations, and grain boundaries. It is important to understand the defect physics so that appropriate methods may be developed to suppress the formation of harmful defects. Here, we review our understanding of defect physics in thin-filmphotovoltaic (PV) materials such as Si, CdTe, Cu(In,Ga)Se2 (CIGS), Cu2ZnSnSe2 (CZTSe), and Cu2ZnSnS2 (CZTS) using the combination of nanoscale electron microscopy characterization and density-functional theory (DFT). Although these thin-film PV materials share the same basic structural feature - diamond structure based - the defect physics in them could be very different. Some defects, such asstacking faults and special twins, have similar electronic properties in these thin-film materials. However, some other defects, such as grain boundaries and interfaces, have very different electronic properties in these materials. For example, grain boundaries produce harmful deep levels in Si and CdTe, but they do not produce significant deep levels in CIGS, CZTSe, and CZTS. These explain whypassivation is critical for Si and CdTe solar cells, but is less important in CIS and CZTS solar cells. We further provide understanding of the effects of interfaces on the performance of solar cells made of these PV materials.
Chalcopyrite solar cells based on CuInSe2 and associated alloys have demonstrated high efficiencies, with current annual shipments in the hundreds of megawatts (MW) range and increasing. Largely due to concern over possible indium (In) scarcity, a related set of materials, the kesterites, which comprise Cu2ZnSnS4 and associated alloys, has received increasing attention. Similarities anddifferences between kesterites and chalcopyrites are discussed as drawn from theory, depositions, and materials characterization. In particular, we discuss predictions from density functional theory, results from vacuum co-evaporation, and characterization via x-ray diffraction, scanning electron microscopy, electron beam-induced current, quantum efficiency, secondary ion mass spectroscopy, andluminescence.
Explore the source record for details and available documents.