Search NASA⌕ Search

Engineering topics

Yan, Yanfa

Publications and source records attributed to Yan, Yanfa.

At least 109 records · Page 6

Low-bandgap mixed tin–lead iodide perovskites with reduced methylammonium for simultaneous enhancement of solar cell efficiency and stability

High-performance perovskite/perovskite tandem solar cells require high-efficiency and stable low-bandgap perovskite subcells. State-of-the-art low-bandgap mixed tin–lead iodide perovskite solar cells exhibit either a high power-conversion efficiency or improved stability, but not both. In this article we report a two-step bilayer interdiffusion growth process to simultaneously meet both requirements for formamidinium-based low-bandgap mixed tin–lead iodide perovskite solar cells. The bilayer interdiffusion growth process allows for the formation of high-quality and large-grained perovskite films with only 10 mol% volatile methylammonium. Additionally, one-dimensional pyrrolidinium perovskite was applied to passivate the perovskite film and improve the junction quality, which resulted in a carrier lifetime of 1.1 µs and an open circuit voltage of 0.865 V for our perovskite film and device with a bandgap of 1.28 eV. Our strategies enabled a power-conversion efficiency of 20.4% for low-bandgap perovskite solar cells under AM 1.5G illumination. More importantly, an encapsulated device can retain 92% of its initial efficiency after 450 h of continuous 1 sun illumination.

14 SOLAR ENERGY↗

The 2020 photovoltaic technologies roadmap

Over the past decade, the global cumulative installed photovoltaic (PV) capacity has grown exponentially, reaching 591 GW in 2019. Rapid progress was driven in large part by improvements in solar cell and module efficiencies, reduction in manufacturing costs and the realization of levelized costs of electricity that are now generally less than other energy sources and approaching similar costs with storage included. Given this success, it is a particularly fitting time to assess the state of the photovoltaics field and the technology milestones that must be achieved to maximize future impact and forward momentum. This roadmap outlines the critical areas of development in all of the major PV conversion technologies, advances needed to enable terawatt-scale PV installation, and cross-cutting topics on reliability, characterization, and applications. Each perspective provides a status update, summarizes the limiting immediate and long-term technical challenges and highlights breakthroughs that are needed to address them. In total, this roadmap is intended to guide researchers, funding agencies and industry in identifying the areas of development that will have the most impact on PV technology in the upcoming years.

14 SOLAR ENERGY↗

Semi-transparent p-type barium copper sulfide as a back contact interface layer for cadmium telluride solar cells

Optically transparent p-type materials play a critical role in transparent electronics including photovoltaic (PV) devices. P-type sulfide materials offer an alternative to oxides for PV application due to improved hole transport properties. Here, we report the solution-based synthesis of earth-abundant p-type transparent conducting barium copper sulfide (α-BaCu 4 S 3 , BCS) thin films. These films were characterized using scanning electron microscopy, X-ray diffraction, UV–Vis–NIR spectrophotometry, Raman spectroscopy, and spectroscopic ellipsometry. BCS films of ~100 nm thickness transmit >70% of visible light. We report on tests of the hole transport properties of these BCS films for cadmium telluride (CdTe) photovoltaics, finding that the BCS deposition process forms a beneficial tellurium (Te) rich surface on CdTe by selectively removing Cd from the surface. Based on our study, the BCS interface layer plays dual functions for CdTe PV devices as a hole transport material and as an etchant, enhancing the resulting device performance. We observed a significant increase in open-circuit voltage of CdTe solar cells with the BCS buffer layer. Furthermore, we discuss semitransparent CdTe solar cells with BCS as a hole transport layer and indium tin oxide as a finishing electrode. Semitransparent CdTe solar cells shows 13.3% conversion efficiency for the front side illumination and 1.2% efficiency for back side illumination, indicating high recombination of charge carriers generated close to the rear CdTe/BCS/ITO contact.

36 MATERIALS SCIENCE↗

Simple descriptor derived from symbolic regression accelerating the discovery of new perovskite catalysts

Symbolic regression (SR) is an approach of interpretable machine learning for building mathematical formulas that best fit certain datasets. In this work, SR is used to guide the design of new oxide perovskite catalysts with improved oxygen evolution reaction (OER) activities. A simple descriptor, μ/t, where μ and t are the octahedral and tolerance factors, respectively, is identified, which accelerates the discovery of a series of new oxide perovskite catalysts with improved OER activity. We successfully synthesise five new oxide perovskites and characterise their OER activities. Remarkably, four of them, Cs 0.4 La 0.6 Mn 0.25 Co 0.75 O 3 , Cs 0.3 La 0.7 NiO 3 , SrNi 0.75 Co 0.25 O 3 , and Sr 0.25 Ba 0.75 NiO 3 , are among the oxide perovskite catalysts with the highest intrinsic activities. Our results demonstrate the potential of SR for accelerating the data-driven design and discovery of new materials with improved properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Arylammonium-Assisted Reduction of the Open-Circuit Voltage Deficit in Wide-Bandgap Perovskite Solar Cells: The Role of Suppressed Ion Migration

Surface treatment using large alkyl/aryl ammonium cations has demonstrated reduced open-circuit voltage (V OC ) deficits in perovskite solar cells (PSCs), but the origin of the improvements has been vaguely attributed to defect passivation. Here, we combine the microscopic probing of the local electrical properties, thermal admittance spectroscopic analysis, and first principles calculations to elucidate the critical role of arylammonium interface layers on suppressing the ion migration in wide-bandgap (WBG) PSCs. Our results reveal that arylammonium surface treatment using phenethylammonium iodide increases the activation energy barrier for ion migration on the surface, which suppresses the accumulation of charge defects at surface and grain boundaries (GBs), leading to reduced dark saturation current density in WBG PSCs. Furthermore, with device optimization, our champion 1.73-eV PSC delivers a power conversion efficiency of 19.07% with a V OC of 1.25 V, achieving a V OC -deficit of 0.48 V.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Sputtered indium tin oxide as a recombination layer formed on the tunnel oxide/poly-Si passivating contact enabling the potential of efficient monolithic perovskite/Si tandem solar cells

We focus on utilizing sputtered indium tin oxide (ITO) as a recombination layer, having low junction damage to an n-type silicon solar cell with a front-side tunnel oxide passivating electron contact, thereby enabling the development of a high efficiency monolithic perovskite/Si tandem device. High transparency and low resistivity ITO films are deposited via low power DC magnetron sputtering at room temperature onto a front-side thin SiO x /n + poly-Si contact in a complete Cz n-Si cell with a back-side Al 2 O 3 /SiN x passivating boron-diffused p + -emitter on a random pyramid textured surface. We report the cell characteristics before and after ITO sputtering, and we find a cure at 250 °C in air is highly effective at mitigating any sputtering induced damage. Our ITO coated sample resulted in an implied open-circuit voltage (iV oc ) of 684.7 ± 11.3 mV with the total saturation current density of 49.2 ± 14.8 fA/cm 2 , an implied fill factor (iFF) of 81.9 ± 0.8%, and a contact resistivity in the range of 60 mΩ-cm 2 to 90 mΩ-cm 2 . After formation of a local Ag contact to the rear emitter and sputtered ITO film as the front-side contact without grid fingers, the pseudo-efficiency of 20.2 ± 0.5% was obtained with the V oc of 670.4 ± 7 mV and pseudo FF of 77.3 ± 1.3% under simulated one sun with the calculated short-circuit current density of 30.9 mA/cm 2 from the measured external quantum efficiency. Furthermore, our modelling result shows that efficiency exceeding 25% under one sun is practically achievable in perovskite/Si tandem configuration using the ITO recombination layer connecting a perovskite top cell and a poly-Si bottom cell.

14 SOLAR ENERGY↗

Influence of Charge Transport Layers on Capacitance Measured in Halide Perovskite Solar Cells

Capacitance-based techniques were previously used to measure the electrical properties of halide perovskite solar cells (PSCs) such as defect activation energy and density, carrier concentration, and dielectric constant, which provide key information for evaluating the device performance. Herein, we show that capacitance-based techniques cannot be used to reliably analyze the properties of defects in the perovskite layer or at its interface, since the high-frequency capacitance signature is due to the response of charge carriers in the hole-transport layer (HTL). For HTL-free PSCs, the high-frequency capacitance can be considered as the geometric capacitance for analyzing the dielectric constant of the perovskite layer, since there is no trapping and de-trapping of charge carriers in the perovskite layer. We also find that the low-frequency capacitance signature can be used to calculate the activation energy of the ionic conductivity of the perovskite layer, but the overlapping effects with charge transport materials must be avoided.

14 SOLAR ENERGY↗

Effects of intrinsic and atmospherically induced defects in narrow bandgap (FASnI 3 ) x (MAPbI 3 ) 1- x perovskite films and solar cells

Narrow band gap mixed tin (Sn) + lead (Pb) perovskites are vital as the bottom sub-cell absorber in high efficiency all-perovskite polycrystalline tandem solar cells. Here, we report on the impact of mixed cation composition and atmospheric exposure of perovskite films on sub-gap absorption in films and performance of solar cells based on narrow band gap mixed formamidinium (FA) + methylammonium (MA) and Sn+Pb halide perovskites, (FASnI 3 ) x (MAPbI 3 ) 1- x . Structural and optical properties of 0.3 ≤ x ≤ 0.8 (FASnI 3 ) x (MAPbI 3 ) 1- x perovskite thin film absorbers with band gaps ranging from 1.25 ( x = 0.6) to 1.34 eV (x = 0.3) are probed with and without atmospheric exposure. Urbach energy, which quantifies the amount of sub-gap absorption, is tracked for pristine perovskite films as a function of composition, with x = 0.6 and 0.3 demonstrating the lowest and highest Urbach energies of 23 and 36 meV, respectively. Films with x = 0.5 and 0.6 compositions show less degradation upon atmospheric exposure than higher or lower Sn-content films having greater sub-gap absorption. The corresponding solar cells based on the x = 0.6 absorber show the highest device performance. Despite having a low Urbach energy, higher Sn-content solar cells show reduced device performances as the amount of degradation via oxidation is the most substantial.

14 SOLAR ENERGY↗

Optoelectronic Characterization of Emerging Solar Absorber Cu3AsS4

Enargite Cu 3 AsS 4 is a promising absorber for thin-film solar cells but little is known about its optoelectronic properties. Here, we present photoluminescence (PL) spectroscopy, time-resolved terahertz spectroscopy (TRTS), timeresolved photoluminescence (TRPL) spectroscopy, and cyclic voltammetry (CV) measurements of enargite thin films. The results indicate promising defect characteristics with minority carrier lifetimes on the order of ns, and band alignments suggest that buffer layers besides CdS must be developed to achieve high efficiency Cu 3 AsS 4 solar cells.

14 SOLAR ENERGY↗

Operando Microscopy Characterization of Perovskite Solar Cells

In this work, we developed operando Kelvin probe force microscopy (KPFM) to study the electrostatic potential distribution across perovskite cells under light and forward bias to gain a deeper understanding of device operation physics. As a case study, we selected perovskite cells with a SnO 2 -based electron-selective layer (ESL), which showed great potential for fabricating high-efficiency, hysteresis-free devices due to the deeper conduction band and higher electron mobility of SnO 2 . The as-made device showed a main junction at the perovskite/spiro interface. After light soaking and applying forward bias, the junction quality improved, possibly explained by filling trap states at the interfaces and by the perovskite absorber perhaps having a self-poling effect; the main junction is observed at the ESL/perovskite interface. The results are consistent with current-voltage measurements, device performance improves mainly with fill factor enhancement. The operando KPFM results should more closely reflect the real case during current density-voltage measurements or solar cell operation. The operando KPFM technique that we have developed can be a powerful tool to provide a deeper understanding of the device operation mechanism and to further optimize the device.

14 SOLAR ENERGY↗

Monolithic Two-Terminal All-Perovskite Tandem Solar Cells with Power Conversion Efficiency Exceeding 21%

Monolithic two-terminal (2-T) all-perovskite tandem solar cells are a promising candidate for the next generation solar cells with ultrahigh efficiency and low fabrication cost. Here, we report on the fabrication of 2-T all-perovskite tandem solar cells consisting of solution-processed wide-bandgap and low-bandgap perovskite subcells connected by a vacuum processed interconnection layer. We employed a bulk-passivation strategy to enlarge the grain size, increase carrier mobilities, reduce electronic disorder, and suppress trap-assisted recombination in the low bandgap mixed Sn-Pb perovskite films, which leads to improved performance of low bandgap perovskite solar cells with an absorber thickness over 750 nm. This advance in high-quality low-bandgap perovskite layers enables the fabrication of efficient 2-T all-perovskite solar cells with power conversion efficiencies of more than 21% and decent stability. Our approach provides a suitable pathway to realize ultra-high efficiency 2-T all-perovskite tandem solar cells.

14 SOLAR ENERGY↗

Is Cs 2 TiBr 6 a promising Pb-free perovskite for solar energy applications?

In a quest for Pb-free perovskites suitable for solar energy applications, Cs 2 TiBr 6 has recently been reported as a promising compound, with appropriate optical and electrical properties as well as high stability under environmental stresses. In this study, we pursue investigation on this compound, demonstrating phase pure Cs 2 TiBr 6 powder formation using solution synthesis and providing complementary experimental characterization and theoretical calculations. An experimental absorption onset of around 2.0 eV is extracted and a weak broad photoluminescence is measured. Density functional theory calculations predict an indirect bandgap, parity-forbidden for both the direct and indirect transitions, which explains the weak and Stokes shifted luminescence. Additionally, we highlight the strong instability of Cs 2 TiBr 6 powder in ambient atmosphere. Therefore, our experimental results supported by theoretical calculations differ from previous results and raise doubts on the suitability of Cs 2 TiBr 6 in its pristine form for solar energy applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Origin of Broad-Band Emission and Impact of Structural Dimensionality in Tin-Alloyed Ruddlesden–Popper Hybrid Lead Iodide Perovskites

Hybrid organic-inorganic lead halide perovskites have shown promising results as active layers in light-emitting diodes, typically utilizing the near-monochromatic, free exciton emission. Some perovskite compounds, however, show broad-band emission that is more intense than the free exciton counterpart. In this study, we show that the light emission properties of Ruddlesden-Popper hybrid perovskites PEA 2 MA n-1 Pb n I 3n+1 (PEA = phenethylammonium, MA = methylammonium) can be tuned by Sn alloying and are highly sensitive to Sn %. With increasing dimensionality, the broad-band emission quantum yield decreases drastically, from 23% in n = 1 to <1% for the n = 3 compound. Using density functional theory calculations and transient reflectance spectroscopy, the broad emission is identified as originating from self-trapped excitons. A dynamic picture of the formation process is also presented, for which ultrafast (<5 ps) hole-trapping at the Sn site is the first step, followed by electron localization from Coulombic interaction. These findings are particularly valuable for designing perovskite materials with intense room-temperature broad-band emission for solid-state lighting applications.

14 SOLAR ENERGY↗

Influences of buffer material and fabrication atmosphere on the electrical properties of CdTe solar cells

Abstract The electrical properties such as interface energy barriers, defect energy levels, and densities dictate the performance of thin film solar cells. Here, we show that these properties can be quantified in cadmium telluride (CdTe) thin‐film solar cells using admittance spectroscopy‐based techniques. Our results reveal that the electrical properties in CdTe thin‐film solar cells depend on both buffer material and the fabrication atmosphere. We find that only a negligible front contact barrier exists at the CdS/CdTe front junction regardless of the fabrication atmospheres, while an obvious front barriers are observed at the ZnMgO (ZMO)/CdTe junctions. Both CdS/CdTe and ZMO/CdTe solar cells exhibit back contact barrier. The energy level of defects is shallower in CdS/CdTe cells than in ZMO/CdTe cells. The fabrication atmosphere influences the electrical properties, i.e., an oxygen‐free atmosphere reduces the front and back barrier heights and lowers the energy level of defects. The results provide critical insights for understanding and optimizing the performance of CdTe thin‐film solar cells.

Awni, Rasha A.↗

Measurement of band offsets and shunt resistance in CdTe solar cells through temperature and intensity dependence of open circuit voltage and photoluminescence

Band offsets at the back contact and front window layer in CdTe-based solar cells affect photovoltaic performance and challenge standard characterization methods. By analyzing the temperature and excitation dependence of both open circuit voltage and absolute photoluminescence intensity, we show that the effects band offsets can be separated from the effects of recombination and shunting. Solar cells were grown with MgZnO window layers and compared to cells with CdS window layers containing varying amounts of oxygen. It was demonstrated that band alignment rather than reduced recombination velocity is the reason for the success of MgZnO as a front interface contact. An assortment of thin back contact interlayers were also deposited, and a PbTe interlayer showed some promise as an Ohmic contact to the CdTe, though it appears to induce a photoconductive shunt. Finally, we show that the shunting resistance given by a standard current-voltage curve technique generally does not represent a physically meaningful quantity unless it is well below one kiloOhm square cm.

14 SOLAR ENERGY↗

High Performance Perovskite-Based Solar Cells (Final Technical Report)

Hybrid lead-halide perovskite semiconductors have become one of the most heavily studied photovoltaic (PV) materials within the past ten years. However, these materials suffer from two key limitations that have ultimately limited the progression towards commercialization: (i) the inclusion of toxic lead (Pb) and (ii) instability towards moisture, oxygen, and temperature. This project has targeted the development of perovskite absorber materials that replace Pb with a benign alternative and that are stable under atmospheric conditions. Under this broad goal, the project had four major objectives: 1) Develop high-performance Pb-based PV devices and study alternative inorganic contact materials to improve the device stability; 2) Advance computational techniques to understand the electronic and optical properties of perovskite semiconductors from a theoretical perspective; 3) Explore various hybrid and inorganic halide, chalcohalide and chalcogenide perovskite absorbers as highly stable, Pb-free absorber alternatives; 4) Develop thin-film deposition and device fabrication methodologies to deposit high-quality Pb-free perovskite absorbers and high-performance devices. Within the first objective, the researchers fabricated high-performing methylammonium lead iodide solar cells based on both traditional architectures (using a TiO 2 contact) and inverted architectures using NiOx and novel CuCrO 2 as hole transport layers (HTL). The work with CuCrO 2 is the first work demonstrating CuCrO 2 as a promising contact material for future, stable perovskite solar cells. Towards the second objective researchers have calculated the intrinsic stability and optoelectronic properties of multiple Pb-free systems including chalcohalide (e.g. CsBiOF 2 ), halide (e.g. Cs 3 Sb 2 I 9 ), and chalcogenide perovskites (e.g. BaZr 1-x TixS 3 ). Additionally, the researchers have furthered the basic understanding of perovskite materials by introducing the concept of electronic dimensionality and its impact on optoelectronic properties. This understanding has had implications in PV applications and beyond. In the third and fourth objectives, the investigators have exhausted a myriad of Pb-free materials in search of a stable, promising Pb-free perovskite absorber, including chalochalides based on CsBiOF 2 , Pb-free halides (such as Cs 2 AgBiBr 6 , Cs 2 TiBr 6 , and Cs(Ge/Sn)I 3 ) , chalcogenide perovskites (e.g. BaZrS 3 ), and perovskite-related halides InI and silver bismuth iodide. While the researchers have studied many promising perovskites and perovskite-alternatives, a stable, high-performing Pb-free absorber has proven to be elusive.

14 SOLAR ENERGY↗

Buffer/absorber interface recombination reduction and improvement of back-contact barrier height in CdTe solar cells

Electronic properties of a CdTe solar cell are reported using temperature-dependent capacitance spectroscopy and current-voltage characteristics, the latter in dark and illuminated conditions. The baseline solar cell material stack investigated is comprised of soda-lime-glass/SnO 2 :F/SnO 2 /CdS:O-buffer/CdTe-absorber/Cu/Au. Properties are compared with CdTe solar cells in which the back surface was hydroiodic acid etched, before the back-contact formation, and a CdTe device in which Mg-doped ZnO (MZO) replaces buffer layer CdS. Reduced back-contact barrier height and grain boundary barrier height are observed in the HI treated CdTe cell. As a result, improved device performance in the MZO-based CdTe device is attributed to reduced emitter/absorber interface recombination when using the MZO window layer.

14 SOLAR ENERGY↗