A comprehensive review of heat pump wood drying technologies
Not Available
Engineering topics
Publications and source records attributed to Yang, Bao.
Not Available
Not Available
Air conditioning is a necessity to achieve a comfortable, habitable home or office for many places in US. However, vapor compression air conditioners are largely made with chlorofluorocarbon refrigerants, or CFCs, which create problems for a world grappling with climate change. In addition, vapor compression air conditioners are driven by electricity. Cooling and heating represent one-third of building electrical energy consumption in US. An absorption chiller is different to vapor compression chillers or air conditioners because it doesn’t use conventional refrigerants, like CFC. Instead, they may use water as the refrigerant which is mixed with safe and nontoxic absorbents. The research performed in this project advanced the understanding of absorption cooling technology and its application in HVAC. Various technologies were explored to improve the performance of the desorber and absorber components in the absorption chillers.
Conventional thermochemical syntheses by continuous heating under near-equilibrium conditions face critical challenges in improving the synthesis rate, selectivity, catalyst stability and energy efficiency, owing to the lack of temporal control over the reaction temperature and time, and thus the reaction pathways. As an alternative, we present a non-equilibrium, continuous synthesis technique that uses pulsed heating and quenching (for example, 0.02 s on, 1.08 s off) using a programmable electric current to rapidly switch the reaction between high (for example, up to 2,400 K) and low temperatures. The rapid quenching ensures high selectivity and good catalyst stability, as well as lowers the average temperature to reduce the energy cost. Using CH4 pyrolysis as a model reaction, our programmable heating and quenching technique leads to high selectivity to value-added C2 products (>75% versus <35% by the conventional non-catalytic method and versus <60% by most conventional methods using optimized catalysts). Our technique can be extended to a range of thermochemical reactions, such as NH 3 synthesis, for which we achieve a stable and high synthesis rate of about 6,000 μmol g Fe –1 h –1 at ambient pressure for >100 h using a non-optimized catalyst. Furthermore, this study establishes a new model towards highly efficient non-equilibrium thermochemical synthesis.
It is essential to understand the interaction energy between water and ionic liquids (ILs) in search of ILs for dehumidification applications. In this paper, the intermolecular interaction energy between water and 1-ethyl-3-methylimidazolium ([EMIM])-based ILs was investigated. The vapor-liquid equilibrium data were first measured for solutions of [EMIM][BF 4 ], [EMIM][N(CN) 2 ], [EMIM][CF 3 SO 3 ], and [EMIM][CH 3 SO 3 ] with water molar fractions of 8–95 % at temperatures of 303–343 K. The IL-IL and water-IL intermolecular interaction energies were determined by using the correlated non-random two-liquid model. The results revealed that fluorine atoms in anions reduce the attraction energy between IL and water, and thus, decrease the water affinity.
Explore the source record for details and available documents.
Thermal transport across the interfaces between few-layer graphene sheets and soft materials exhibits intriguing anomalies when interpreted using the classical Kapitza model, e.g., the conductance of the same interface differs greatly for different modes of interfacial thermal transport. Using atomistic simulations, we show that such thermal transport follows a nonlocal flux-temperature drop constitutive law and is characterized jointly by a quasi-local conductance and a nonlocal conductance instead of the classical Kapitza conductance. Lastly, the nonlocal model enables rationalization of many anomalies of the thermal transport across embedded few-layer graphene sheets and should be used in studies of interfacial thermal transport involving few-layer graphene sheets or other ultra-thin layered materials.
The thermal conductance of graphene-matrix interfaces plays a key role in controlling the thermal transport properties of graphene-based nanocomposites. Using classical molecular dynamics simulations, we found that the interfacial thermal conductance depends strongly on the mode of heat transfer at the graphene-matrix interfaces: if heat enters graphene from one side of its basal plane and immediately leaves the graphene through the other side, the corresponding interfacial thermal conductance, G(across), is large; if heat enters graphene from both sides of its basal plane and leaves the graphene at a position far away on its basal plane, the corresponding interfacial thermal conductance, G(non-across), is small. For a single-layer graphene immersed in liquid octane, G(across) is ~150 MW/m2K while Gnon-across is ~5 MW/m2K. G(across) decreases with increasing multi-layer graphene thickness (i.e., number of layers in graphene) and approaches an asymptotic value of 100 MW/m2K for 7-layer graphenes. G(non-across) increases only marginally as the graphene sheet thickness increases. Such a duality of the interface thermal conductance for different probing methods and its dependence on graphene sheet thickness can be traced ultimately to the unique physical and chemical structure of graphene materials. The ramifications of these results in areas such as experimental measurement of thermal conductivity of graphene and the design of graphene-based thermal nanocomposites are discussed.