Search NASA⌕ Search

Engineering topics

Yang, Chunpeng

Publications and source records attributed to Yang, Chunpeng.

At least 19 records

Lithium battery

The present disclosure describes various types of batteries, including lithium-ion batteries having an anode assembly comprising: an anode comprising a first porous ceramic matrix having pores; and a ceramic separator layer affixed directly or indirectly to the anode; a cathode; an anode-side current collector contacting the anode; and anode active material comprising lithium located within the pores or cathode active material located within the cathode; wherein, the ceramic separator layer is located between the anode and the cathode, no electrically conductive coating on the pores contacts the separator layer, and in a fully charged state, lithium active material in the anode does not contact the separator layer. Also disclosed are methods of making and methods of using such batteries.

25 ENERGY STORAGE↗

A high-performance hydroxide exchange membrane enabled by Cu 2+ -crosslinked chitosan

We report ion exchange membranes are widely used to selectively transport ions in various electrochemical devices. Hydroxide exchange membranes (HEMs) are promising to couple with lower cost platinum-free electrocatalysts used in alkaline conditions, but are not stable enough in strong alkaline solutions. Herein, we present a Cu 2+ -crosslinked chitosan (chitosan-Cu) material as a stable and high-performance HEM. The Cu 2+ ions are coordinated with the amino and hydroxyl groups of chitosan to crosslink the chitosan chains, forming hexagonal nanochannels (similar to 1nm in diameter) that can accommodate water diffusion and facilitate fast ion transport, with a high hydroxide conductivity of 67 ms cm -1 at room temperature. The Cu 2+ coordination also enhances the mechanical strength of the membrane, reduces its permeability and, most importantly, improves its stability in alkaline solution (only 5% conductivity loss at 80 degrees C after 1,000 h). These advantages make chitosan-Cu an outstanding HEM, which we demonstrate in a direct methanol fuel cell that exhibits a high power density of 305 mWcm -2 . The design principle of the chitosan-Cu HEM, in which ion transport channels are generated in the polymer through metal-crosslinking of polar functional groups, could inspire the synthesis of many ion exchange membranes for ion transport, ion sieving, ion filtration and more.

36 MATERIALS SCIENCE↗

Multi-principal elemental intermetallic nanoparticles synthesized via a disorder-to-order transition

Nanoscale multi-principal element intermetallics (MPEIs) may provide a broad and tunable compositional space of active, high–surface area materials with potential applications such as catalysis and magnetics. However, MPEI nanoparticles are challenging to fabricate because of the tendency of the particles to grow/agglomerate or phase-separated during annealing. Here, we demonstrate a disorder-to-order phase transition approach that enables the synthesis of ultrasmall (4 to 5 nm) and stable MPEI nanoparticles (up to eight elements). We apply just 5 min of Joule heating to promote the phase transition of the nanoparticles into L1 0 intermetallic structure, which is then preserved by rapidly cooling. This disorder-to-order transition results in phase-stable nanoscale MPEIs with compositions (e.g., PtPdAuFeCoNiCuSn), which have not been previously attained by traditional synthetic methods. This synthesis strategy offers a new paradigm for developing previously unexplored MPEI nanoparticles by accessing a nanoscale-size regime and novel compositions with potentially broad applications.

25 ENERGY STORAGE↗

Rapid Atomic Ordering Transformation toward Intermetallic Nanoparticles

Chemically ordered intermetallic nanoparticles are promising candidates for energy-related applications such as electrocatalysis. However, the synthesis of intermetallics generally requires long annealing (several hours) to achieve the ordered structure, which causes nanoparticles agglomeration and diminished performance, particularly for catalysis. Herein, we demonstrate a new rapid Joule heating approach that can synthesize highly ordered and well-dispersed intermetallic nanoparticles. As a proof-of-concept, we synthesized fully ordered Pd 3 Pb intermetallic nanoparticles that feature small size distribution (~6 nm). Computational analysis of the L1 2 Pd 3 Pb material suggests that this rapid atomic ordering transformation can be attributed to a vacancy-mediated diffusion mechanism. Moreover, the nanoparticles demonstrate excellent electrocatalytic activity and exceptional stability for the oxygen reduction reaction (ORR), retaining >95% of the current density over 10 h of chronoamperometry test with negligible structural and compositional changes. Furthermore, this study demonstrates a new strategy of providing a new direction for intermetallic synthesis and catalyst discovery.

25 ENERGY STORAGE↗

High-Entropy Metal Sulfide Nanoparticles Promise High-Performance Oxygen Evolution Reaction

Transition metal sulfide with a multi-elemental nature represents a class of promising catalysts for oxygen evolution reaction (OER) owing to its good catalytic activity. However, its synthesis remains a grand challenge due to the thermodynamic immiscibility of the constituent multimetallic elements in a sulfide structure. Herein, we for the first time report a high-entropy metal sulfide (HEMS, i.e., (CrMnFeCoNi)Sx) solid solution nanoparticles. Computational and X-ray photoelectron spectroscopy analysis suggest that the (CrMnFeCoNi)S x exhibits a synergistic effect among metal atoms that leads to desired electronic states to enhance OER activity. The (CrMnFeCoNi)Sx nanoparticles showed one of the best activities (low overpotential 295 mV at 100 mA cm -2 in 1 M KOH solution) and good durability (only slight polarization after 10 hours by chronopotentiometry) compared with the unary, binary, ternary, and quaternary sulfide counterparts. This work opens up a new synthesis paradigm for high-entropy compound nanoparticles for highly efficient electrocatalysis applications.

25 ENERGY STORAGE↗

Hierarchical Polyelemental Nanoparticles as Bifunctional Catalysts for Oxygen Evolution and Reduction Reactions

Efficient electrocatalysts are critical in various clean energy conversion and storage systems. Polyelemental nanomaterials are attractive as multi-functional catalysts due to their wide compositions and synergistic properties. However, controlled synthesis of polyelemental nanomaterials is difficult due to their complex composition. Herein, we present a one-step synthetic strategy to fabricate a hierarchical polyelemental nanomaterial, which contains ultrasmall precious metal nanoparticles (IrPt, ~5 nm) anchored on spinel-structure transition metal oxide nanoparticles. The polyelemental nanoparticles serve as excellent bifunctional catalysts for the oxygen evolution reaction (OER) and oxygen reduction reaction (ORR). The mass catalytic activity of the polyelemental nanoparticles is 7-times higher than that of Pt in ORR and 28-times that of Ir in OER at the same overpotentials, demonstrating the high activity of the bifunctional electrocatalyst. We attribute this outstanding performance to the controlled multiple elemental composition, mixed chemical states, and large electroactive surface area. The hierarchical nanostructure and polyelemental design of these nanoparticles offers a general and powerful alternative material for catalysis, solar cells, and more.

25 ENERGY STORAGE↗

Overcoming immiscibility toward bimetallic catalyst library

Bimetallics are emerging as important materials that often exhibit distinct chemical properties from monometallics. However, there is limited access to homogeneously alloyed bimetallics because of the thermodynamic immiscibility of the constituent elements. Overcoming the inherent immiscibility in bimetallic systems would create a bimetallic library with unique properties. Here, we present a nonequilibrium synthesis strategy to address the immiscibility challenge in bimetallics. As a proof of concept, we synthesize a broad range of homogeneously alloyed Cu-based bimetallic nanoparticles regardless of the thermodynamic immiscibility. The nonequilibrated bimetallic nanoparticles are further investigated as electrocatalysts for carbon monoxide reduction at commercially relevant current densities (>100 mA cm -2 ), in which Cu 0.9 Ni 0.1 shows the highest multicarbon product Faradaic efficiency of ~76% with a current density of ~93 mA cm -2 . The ability to overcome thermodynamic immiscibility in multimetallic synthesis offers freedom to design and synthesize new functional nanomaterials with desired chemical compositions and catalytic properties.

25 ENERGY STORAGE↗

In situ iron coating on nanocatalysts for efficient and durable oxygen evolution reaction

The oxygen evolution reaction (OER) is essential to many important energy conversion and storage systems. To achieve high-performance and low-cost OER electrocatalysts, great effort has been devoted to the development of noble-metal-free OER nanocatalysts. While nanostructured materials have been shown effective at improving the catalytic activity, the stability of the nanocatalyst has yet to be significantly improved. Furthermore, nanocatalyst syntheses are typically complex, limiting their practical application. Herein, we design a noble-metal-free nanocatalyst which has a CoFeP x core and an in situ Fe coating layer to enhance the material’s catalytic activity and durability for OER. We utilize the vapor pressure difference of Fe and Co at high temperature to synthesize the CoFeP x -Fe core-shell nanoparticles via a one-step high-temperature shock technique. The high-temperature method strongly anchors the CoFeP x nanoparticles onto a carbon substrate. The thin Fe shell layer (~2 nm) coated on the CoFeP x greatly enhances the durability of the CoFeP x catalyst without hampering its activity due to the geometric effect. This nanocatalyst with an in situ Fe shell demonstrates a successful nanocoating approach for fabricating catalytically active protection layers on catalysts with improved activity and durability.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

An Electron/Ion Dual‐Conductive Alloy Framework for High‐Rate and High‐Capacity Solid‐State Lithium‐Metal Batteries

Abstract The solid‐state Li battery is a promising energy‐storage system that is both safe and features a high energy density. A main obstacle to its application is the poor interface contact between the solid electrodes and the ceramic electrolyte. Surface treatment methods have been proposed to improve the interface of the ceramic electrolytes, but they are generally limited to low‐capacity or short‐term cycling. Herein, an electron/ion dual‐conductive solid framework is proposed by partially dealloying the Li–Mg alloy anode on a garnet‐type solid‐state electrolyte. The Li–Mg alloy framework serves as a solid electron/ion dual‐conductive Li host during cell cycling, in which the Li metal can cycle as a Li‐rich or Li‐deficient alloy anode, free from interface deterioration or volume collapse. Thus, the capacity, current density, and cycle life of the solid Li anode are improved. The cycle capability of this solid anode is demonstrated by cycling for 500 h at 1 mA cm −2 , followed by another 500 h at 2 mA cm −2 without short‐circuiting, realizing a record high cumulative capacity of 750 mA h cm −2 for garnet‐type all‐solid‐state Li batteries. This alloy framework with electron/ion dual‐conductive pathways creates the possibility to realize high‐energy solid‐state Li batteries with extended lifespans.

Yang, Chunpeng↗

Continuous plating/stripping behavior of solid-state lithium metal anode in a 3D ion-conductive framework

Significance Solid-state lithium metal anode possesses great promise owing to its high energy density and improved safety. This work introduces a strategy for constructing a 3D Li metal anode, which is hosted in a solid-state ion-conducting host and shows a safe and dendrite-free plating/stripping behavior. The host is based on a garnet-type ion-conductive framework and a bottom-deposited Cu current collector. The Li anode is plated within the solid garnet framework from the bottom Cu layer and shows a dendrite-free deposition behavior, effectively averting the dendrite penetration issue. Owing to the 3D ion-conductive host, the volume change and interface contact problem of the Li anode have been significantly mitigated, realizing a high-capacity and safe Li metal anode for solid-state high-energy-density batteries.

25 ENERGY STORAGE↗

Protected Lithium-Metal Anodes in Batteries: From Liquid to Solid

High-energy lithium-metal batteries are among the most promising candidates for next-generation energy storage systems. With a high specific capacity and a low reduction potential, the Li-metal anode has attracted extensive interest for decades. Dendritic Li formation, uncontrolled interfacial reactions, and huge volume effect are major hurdles to the commercial application of Li-metal anodes. Recent studies have shown that the performance and safety of Li-metal anodes can be significantly improved via organic electrolyte modification, Li-metal interface protection, Li-electrode framework design, separator coating, and so on. Superior to the liquid electrolytes, solid-state electrolytes are considered able to inhibit problematic Li dendrites and build safe solid Li-metal batteries. Inspired by the bright prospects of solid Li-metal batteries, increasing efforts have been devoted to overcoming the obstacles of solid Li-metal batteries, such as low ionic conductivity of the electrolyte and Li–electrolyte interfacial problems. In this paper, the approaches to protect Li-metal anodes from liquid batteries to solid-state batteries are outlined and analyzed in detail. Finally, perspectives regarding the strategies for developing Li-metal anodes are discussed to facilitate the practical application of Li-metal batteries.

25 ENERGY STORAGE↗

Encapsulation of Metallic Na in an Electrically Conductive Host with Porous Channels as a Highly Stable Na Metal Anode

Room-temperature Na ion batteries (NIBs) have attracted great attention because of the widely available, abundant sodium resources and potentially low cost. Currently, the challenge of the NIB development is due primarily to the lack of a high-performance anode, while the Na metal anode holds great promise considering its highest specific capacity of 1165 mA h/g and lowest anodic potential. However, an uneven deposit, relatively infinite volume change, and dendritic growth upon plating/stripping cycles cause a low Coulombic efficiency, poor cycling performance, and severe safety concerns. In this study, a stable Na carbonized wood (Na–wood) composite anode was fabricated via a rapid melt infusion (about 5 s) into channels of carbonized wood by capillary action. The channels function as a high-surface-area, conductive, mechanically stable skeleton, which lowers the effective current density, ensures a uniform Na nucleation, and restricts the volume change over cycles. As a result, the Na–wood composite anode exhibited flat plating/stripping profiles with smaller overpotentials and stable cycling performance over 500 h at 1.0 mA/cm 2 in a common carbonate electrolyte system. Finally, in sharp comparison, the planar Na metal electrode showed a much shorter cycle life of 100 h under the same test conditions.

09 BIOMASS FUELS↗