Search NASA⌕ Search

Engineering topics

Yang, Fang

Publications and source records attributed to Yang, Fang.

At least 19 records

Microfluidic droplets with amended culture media cultivate a greater diversity of soil microorganisms

ABSTRACT Uncultivated but abundant soil microorganisms have untapped potential for producing broad ranges of natural products, as well as for bioremediation. However, cultivating soil microorganisms while maintaining a broad microorganism diversity to enable phenotyping and functional analysis of as diverse individual isolates as possible remains challenging. In this study, we developed and tested the ability of several culture media formulations that contain defined soil metabolites or soil extracts to maintain microorganism diversity during culture. We also assessed their performance in microfluidic droplet cultivation where single-soil microorganism isolates were encapsulated and cultivated in picoliter-volume water-in-oil emulsion droplets to enable clonal growth needed for downstream functional analyses. Our results show that droplet cultivation with media supplemented by soil extract or soil metabolites enables the recovery of soil microorganisms with higher diversity (up to 1.5-fold higher richness) compared to bulk cultivation methods. Importantly, 1.7-fold more of less abundant (<1%) phyla and 11-fold more of unique genera were recovered, demonstrating the utility of this method for interrogating highly diverse soil microorganisms for broad ranges of applications. IMPORTANCE Although soil microorganisms hold a significant value in bioproduction and bioremediation, only a small fraction—less than 1%—can be cultured under specific media and cultivation conditions. This indicates that there are ample opportunities in harvesting the diverse environmental microorganisms if isolating and recovering these uncultured microorganisms are possible. This paper presents a new cultivation technique composed of isolating single-soil microorganism cell from anin situsoil microorganism community in microfluidic droplets and conducting in-droplet cultivation in media supplemented by soil extract or soil metabolites. This method enables the recovery of a broader diversity of the original microorganism community, laying the groundwork for a high-throughput phenotyping of these diverse microorganisms from their natural habitats.

Biotechnology & Applied Microbiology↗

Effective Modulation of Interlayer Excitons in WSe 2 /WS 2 Heterostructures by Plasmon–Exciton Interaction

Effective charge transfer and carrier separation at the interface are paramount for optimizing the performance of devices based on van der Waals heterostructures. In this investigation, surface plasmons generated by gold nanoparticles are employed to modulate the photocarrier dynamics in WSe 2 /WS 2 heterostructures. The results of pump-probe measurements reveal that the efficiency of carrier transfer across the WSe 2 /WS 2 heterostructure interface can be significantly enhanced via energy transfer mechanisms mediated by gold plasmons. Moreover, the electric field engendered by the plasmonic oscillations can modulate the dipole moment of the interlayer exciton. These well-aligned excitons avoid the annihilation and the extension of the lifetime of the excitons with increased pump power is realized by screening effect. The findings presented herein offer valuable insights for the active manipulation of charge transfer and extend our understanding of the integral role played by plasmon-exciton coupling in mediating charge separation in van der Waals heterostructures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Stacked Greenfield and Brownfield ROZ Fairways in the Illinois Basin Geo-Laboratory: Co-Optimization of EOR and Associated CO 2 Storage

Residual oil zones (ROZs) are economically viable targets for carbon dioxide enhanced oil recovery (CO 2 -EOR); thick, carbonate ROZs in the San Andres Formation in the Wasson Field of the Permian Basin are an example. Incremental oil produced from CO 2 -EOR can be carbon negative via associated storage of injected CO 2 . Given the regional extent of ROZ fairways and generally higher net utilization of CO 2 (compared to conventional CO 2 -EOR), ROZs provide the opportunity for significant carbon neutral to carbon negative oil production with associated CO 2 storage, and therefore should be a priority target for exploration. However, ROZs have not been widely recognized or identified due to poor or no conventional oil production. Hence, in places like the Illinois Basin (ILB), exploratory analyses are required to recognize the existence of an ROZ. As part of this study, four formations were selected for detailed regional characterization and analysis: Carper Sandstone (part of the Borden Siltstone), Tar Springs Sandstone, Cypress Sandstone, and Middle Devonian (Geneva Dolomite and associated Dutch Creek Sandstone). The four formations underwent regional geological characterization to develop a regional geologic framework for the ROZs and their overlying seals. Findings of this study are supported by data from two field laboratory sites, one with stacked greenfield ROZs and the other with a stacked complex that includes a brownfield ROZ and depleted conventional reservoirs. The field laboratory sites were used to collect data and conduct tests to validate ROZ detection methodologies and identify economic field-deployable strategies to co-optimize CO 2 -EOR and associated storage in stacked ROZs. Findings from these field sites were extrapolated to characterize the basin-wide stacked ROZ fairway resource.

01 COAL, LIGNITE, AND PEAT↗

Regulating crystallization to maintain balanced carrier mobility via ternary strategy in blade-coated flexible organic solar cells

Regulating the crystallization of donor and acceptor to maintain balanced carrier mobility is of great importance to fabricate efficient organic solar cells (OSCs). Herein, the balanced crystallinity between donor and acceptor was finely controlled in blade-coated OSCs. By adding high crystalline FOIC into PBDB-T:ITIC system, a balanced carrier mobility was achieved, resulting in the much improved fill factor. The optimized ternary device exhibits an increased current density, due to the enhanced light-harvesting efficiency with complementary absorption and the morphology change. Morphology characterization demonstrated that the ternary film exhibits a highly balanced crystallinity between the donor and acceptor on account of the formation of acceptor alloy. Moreover, the ternary film not only possesses a small domain size, but also exhibits a high domain purity as compared to both binary films. Encouragingly, a highest power conversion efficiency (PCE) of 10.68% was obtained for the blade-coated ternary OSCs. In addition, the blade-coated flexible large-area (105 mm 2 ) OSC based on PBDB-T:ITIC:FOIC ternary system also exhibits a high PCE of 9.81%, showing great potential in the high-throughput fabrication of OSCs.

14 SOLAR ENERGY↗

Geothermal Heat Recovery Complex: Large-Scale, Deep Direct-Use System in a Low-Temperature Sedimentary Basin (Final Report)

A feasibility study of using deep direct-use (DDU) geothermal energy to heat agricultural research facilities (ARFs) was conducted at the University of Illinois at Urbana-Champaign (U of IL) and its similar application to military facilities in the Illinois Basin (ILB). The geothermal energy system (GES) investigated utilizes low-temperature (30–90°C; 90–190°F) geothermal fluid (i.e., brine) from an extraction well that is part of a deep, two-well (doublet) system that extends to the bottom of the ILB. The geothermal reservoir modeled, the Mt. Simon Sandstone (MSS), is about 1,280 m (4,200 feet) deep and 457 m thick (1,500 feet) beneath the U of IL. The DDU GES surface infrastructure includes heat exchangers connected in-parallel to pipelines carrying the geothermal fluid and fresh cold and hot water. Analysis of the GES indicated that the MSS can provide a baseload of 2 MMBtu/hr to heat the ARFs by extracting 954 m³/d (6,000 barrels/day [bbl/d]) of geothermal fluid that has a temperature of 44–46 °C (111–115 °F). In addition to analyzing the levelized cost of heat (LCOH) and life cycle costs, the environmental effects of the DDU GES were evaluated, including reduced greenhouse gas (GHG) emissions and water consumption. Multiple system designs were evaluated and then ranked based on their maximum heating performance, energy efficiency, and cost recovery. This feasibility study identified the key components of the fully-integrated DDU technology that can be implemented, both technically and economically. The results and information from this study provides end-users and policy makers with guidance for additional research on the specific components of DDU technology such that its widespread use can provide an uninterruptible energy source, increase resilience from extreme weather conditions, reduce U.S. dependency on fossil fuels, and reduce greenhouse gas (GHG) emissions. The site-specific part of this study gives U of IL administrators a realistic and pragmatic assessment of the financial resources necessary to add a DDU GES in the MSS to the campus’ energy portfolio.

15 GEOTHERMAL ENERGY↗

A workflow to assess the efficacy of brine extraction for managing injection-induced seismicity potential using data from a CO 2 injection site near Decatur, Illinois

Injection of CO 2 for storage in a geologic formation increases pore pressure and alters in situ stresses. Depending on the orientation of any existing fault and fracture planes, such as critically stressed planes, this stress alteration will modify normal stresses acting on planes and could result in frictional sliding and release stored energy in the form of seismicity. Brine extraction (BE) is a technique that can be applied prior to, or during, CO 2 injection to reduce pore pressure for increasing storage capacity and, potentially, for reducing the likelihood of frictional sliding. Here a workflow is described to assess the efficacy of BE for mitigating frictional sliding (i.e., seismicity) during injection and entails: site characterization, stress calculations and failure assessment, static and dynamic modeling, and BE operational planning. Site characterization describes the stress field used to calculate the Coulomb Failure Function (CFF) that constrains allowable pore pressure changes and injection rates in the numerical simulation of CO 2 injection scenarios. The inclusion of BE in the workflow allows for determination of the potential need for pressure reduction, and evaluation of the effectiveness of this operation. Example application of the workflow using an injection field dataset near Decatur, IL, provides insight on fracture planes and stresses at the site, formation properties and the impact of variable CO 2 injection-rate targets on whether BE plans are required. The study workflow indicates that BE could enhance CO 2 injection rate by 39% and correspondingly reduce the potential for injection-induced seismicity as indicated by a reduction in CFF.

58 GEOSCIENCES↗

Establishment and Characterization of Two Novel Cholangiocarcinoma Cell Lines

Background: Cholangiocarcinoma (CCA) is a rare, aggressive and highly lethal tumor. The disease is very difficult to diagnose and multi-modality treatments are ineffective. To improve our understanding of the biological characteristics of CCA, and facilitate the identification of valid treatments, an in-depth characterization of two novel Chinese patient-derived primary CCA cell lines was performed. Methods: Two CCA cell lines were developed and labelled ZJU-0826 and -1125. The two cell lines were characterized with respect to phenotypic, molecular, biomarker, functional and histological properties. Results: Two novel cell lines were cultured for 2 years, and maintained for more than 100 passages. They retained their typical biliary epithelial morphology and ultrastructure. The population doubling times of ZJU-0826, and -1125 were 63.84 h and 44.73 h, respectively. The cells exhibited near-triploid karyotypes with complex structural aberrations. ZJU-1125 cells had mutations in TP53 exons. Short tandem repeats genotyping confirmed the human origin and difference between lines. An immunophenotype analysis showed that ZJU-0826 is positive for CD44, CD29, Pdx1, CD236, FoxA1, FoxA2, and Nanog, and ZJU-1125 positive for CD44, CD29, CD133, Pdx1, FoxA1, FoxA2, and Nanog. ZJU-1125 had greater invasion ability in vitro and tumorigenicity than those of ZJU-0826. Conclusions: Our results confirm the validity of the ZJU-0826 and -1125 as representative models for the elucidation of the molecular pathogenesis of perihilar CCA, and intrahepatic CCA in both in vitro and in vivo studies, respectively.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

High-Carbon Ferrochrome Effects on Microstructure and Mechanical Properties of Powder Metallurgy Titanium Alloys

In this paper, the powder metallurgy method was employed to prepare titanium alloys with high-carbon ferrochrome (HCFeCr). With the HCFeCr addition, the size of the β grains decreased and the lamellae of the α phase became thinner. The TiC strengthening phase precipitated at the grain boundaries, resulting in the inhibition of the β grain growth and hardness enhancement. In addition, Fe and Cr as β-stabilizing elements existed in the enriched β-Ti phase, which increased the β phase amount. The strength improvement was attributed to grain size optimization and strengthening phase formation. With the 9 wt.% HCFeCr addition, the corresponding Vickers hardness increased to 480 HV, which is 60% higher than the Ti6Al4V alloy. The tensile and yield strength was 1228 and 1140 MPa, respectively. The addition of HCFeCr can effectively enhance the strength and hardness while reducing the cost. This is a promising additive to obtain low-cost Ti alloys with high mechanical properties.

36 MATERIALS SCIENCE↗

Annealing Effects on Microstructure and Magnetic Properties of (NdPr){sub 9.5}(FeNbCoCu){sub 79.5}(BC){sub 11} Nanocomposite Magnets

Annealing effects on microstructure and magnetic properties of (NdPr){sub 9.5}(FeNbCo){sub 79.5}(BC){sub 11} ribbons were investigated. It was observed that Nd{sub 2}Fe{sub 14}B and Fe{sub 3}B phases were directly formed at low spinning speed. Then, the alloys transformed to an amorphous state at a speed of 20 m/s. Annealed at 700 {sup ∘}C for 10 min, the amorphous alloys as-quenched at 20 m/s crystallized into a nanocomposite composed of Nd{sub 2}Fe{sub 14}B and α-Fe phases. The formation of Fe{sub 3}B phases was inhibited. The magnetic properties firstly increased and then decreased with the increasing of annealing time. The optimum magnetic properties were achieved in the alloys annealed at 700 {sup ∘}C for 10 min. The corresponding coercivity, remanence, and the maximum energy product was 427.5 kA/m, 0.94 T, and 101.2 kJ/m{sup 3}, respectively. In addition, fine and uniform grains were formed. The average grain size was 10 nm.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Performance of Nd-Fe-B Magnets Fabricated by Hot Isostatic Pressing and Low-Temperature Sintering

Magnetic properties and microstructure of Nd-Fe-B sintered magnets fabricated by hot isostatic pressing (HIP) were studied. For comparison, magnets were also fabricated by vacuum sintering. The density reached 7.58 g/cm{sup 3} for the magnets HIP-sintered at 1123 K. The density of the magnets vacuum-sintered at 1123 K was much lower, which is of about 6.92 g/cm{sup 3}. While the density of magnets vacuum-sintered at 1318 K was the same as the HIP-sintered magnets, the sintering temperature was significantly decreased to 1123 K. In addition, the average grain size decreased from 9 to 6 μm, which has enhanced coercivity. Therefore, the coercivity increased from 1067.7 to 1238.5 kA/m, which is 16% higher than the vacuum-sintered magnets. HIP is a promising method to obtain high density and high coercivity Nd-Fe-B sintered magnets.

36 MATERIALS SCIENCE↗

The Improved Thermal Conductivity of a Potting Material for High-Power Fast Warm-Up Cathodes

With higher power, frequency and longer life of microwave tubes, cathode heater assembly is being modified to enhance the warm-up performance and reliability, which are governed by ceramics thermal conductivity, electrical resistivity and shrinkage. In present work, a potting material with a high thermal conductivity of 22.14 W/(m K) and low linear shrinkage of 5.5% was prepared using two kinds of alumina powders with different size and morphology. Aqueous slurries were produced for centrifugal casting. The highest solid loading slurries with 70 vol.% were obtained. Green body with relative density above 70% was easily made from slurries using centrifugal casting. Relative sintered density reached 86.75% maximum without any sintering aids. Rheological behavior of slurries, potting microstructure, sintering shrinkage and thermal conductivity were analyzed. Continuous particle distribution, series and parallel models were used to guide the powders proportion and explain the thermal conductivity. The potting material thermal conductivity experimental data agreed with the series and parallel models when the weight parameter ξ was between 0.3 and 0.5.

36 MATERIALS SCIENCE↗

The anti-malarial atovaquone selectively increases chemosensitivity in retinoblastoma via mitochondrial dysfunction-dependent oxidative damage and Akt/AMPK/mTOR inhibition

Highlights: • Anti-malarial atovaquone exhibits preferential toxicity to retinoblastoma cells. • Atovaquone increases chemosensitivity in retinoblastoma. • Retinoblastoma cells have higher mitochondrial biogenesis than normal retinal cells. • Atovaquone targets Akt/AMPK/mTOR signaling via inducing mitochondrial dysfunction. • Mitochondrial respiration inhibition is required for atovaquone's action. Mitochondria has been identified as a promising target in several cancers. However, little is known on the effects of targeting mitochondria in retinoblastoma. In this work, we show that anti-malarial atovaquone, at clinically achievable concentration, demonstrates inhibitory effects to retinoblastoma cells, to a more extent than in normal retinal cells. Atovaquone also significantly increases chemosensitivity in retinoblastoma. Importantly, we show that retinoblastoma cells have higher level of mitochondrial respiration, membrane potential, mass and ATP compared to normal retinal cells. Although atovaquone significantly inhibits mitochondrial respiration and decrease ATP level in both malignant and normal retinal cells in a similar manner, atovaquone induces much more oxidative stress and damage in retinoblastoma than normal retinal cells. These suggest that normal retinal cells are more tolerable to mitochondrial dysfunctions than retinoblastoma cells. We further demonstrate that atovaquone targets Akt/AMPK/mTOR signaling via inducing mitochondrial dysfunction. Our pre-clinical work demonstrates the translational potential of atovaquone as an addition to the treatment armamentarium for retinoblastoma. Our work also demonstrates the differences of mitochondrial biogenesis and function in malignant versus normal retinal cells which are important for the targeted therapy in retinoblastoma.

60 APPLIED LIFE SCIENCES↗