Search NASA⌕ Search

Engineering topics

Yang, Jing

Publications and source records attributed to Yang, Jing.

At least 55 records · Page 3

Nonequilibrium steady state and heat transport in nonlinear open quantum systems: Stochastic influence action and functional perturbative analysis

In this paper, we show that a nonequilibrium steady state (NESS) exists at late times in open quantum systems with weak nonlinearity by following its nonequilibrium dynamics with a perturbative analysis. We consider an oscillator chain containing three-types of anharmonicity: cubic α- and quartic β-type Fermi–Pasta–Ulam–Tsingou (FPUT) nearest-oscillator interactions and the on-site (pinned) Klein–Gordon (KG) quartic self-interaction. Assuming weak nonlinearity, we introduce a stochastic influence action approach to the problem and obtain the energy flows in different junctures across the chain. The formal results obtained here can be used for quantum transport problems in weakly nonlinear quantum systems. For α-type anharmonicity, we observe that the first-order corrections do not play any role in the thermal transport in the NESS of the configuration we considered. For KG and β-types anharmonicity, we work out explicitly the case of two weakly nonlinearly coupled oscillators, with results scalable to any number of oscillators. We examine the late-time energy flows from one thermal bath to the other via the coupled oscillators, and show that both the zeroth- and the first-order contributions of the energy flows become constant in time at late times, signaling the existence of a late-time NESS to first order in nonlinearity. Our perturbative calculations provide a measure of the strength of nonlinearity for nonlinear open quantum systems, which may help control the mesoscopic heat transport distinct from or close to linear transport. Furthermore, our results also give a benchmark for the numerical challenge of simulating heat transport. Our setup and predictions can be implemented and verified by investigating heat flow in an array of Josephson junctions in the limit of large Josephson energy with the platform of circuit QED.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of Carbon on the Volume of Solid Iron at High Pressure: Implications for Carbon Substitution in Iron Structures and Carbon Content in the Earth’s Inner Core

Understanding the effect of carbon on the density of hcp (hexagonal-close-packed) Fe-C alloys is essential for modeling the carbon content in the Earth’s inner core. Previous studies have focused on the equations of state of iron carbides that may not be applicable to the solid inner core that may incorporate carbon as dissolved carbon in metallic iron. Carbon substitution in hcp-Fe and its effect on the density have never been experimentally studied. We investigated the compression behavior of Fe-C alloys with 0.31 and 1.37 wt % carbon, along with pure iron as a reference, by in-situ X-ray diffraction measurements up to 135 GPa for pure Fe, and 87 GPa for Fe-0.31C and 109 GPa for Fe-1.37C. The results show that the incorporation of carbon in hcp-Fe leads to the expansion of the lattice, contrary to the known effect in body-centered cubic (bcc)-Fe, suggesting a change in the substitution mechanism or local environment. The data on axial compressibility suggest that increasing carbon content could enhance seismic anisotropy in the Earth’s inner core. The new thermoelastic parameters allow us to develop a thermoelastic model to estimate the carbon content in the inner core when carbon is incorporated as dissolved carbon hcp-Fe. The required carbon contents to explain the density deficit of Earth’s inner core are 1.30 and 0.43 wt % at inner core boundary temperatures of 5000 K and 7000 K, respectively.

58 GEOSCIENCES↗

Ferroelectric barium titanate derivatives containing Mo and Mg for transparent photovoltaic applications

Using first-principles methods, we investigate the electronic properties of the [Ba(Mo 1/2 ,Mg 1/2 )O 3 ] x -[BaTiO 3 ] 1-x solid solution derived from barium titanate as a potential candidate to be used in photovoltaic devices. Focusing on the bandgap and its origin, we study the effect of different possible Mo and Mg contents, arrangements, and phases of [Ba(Mo 1/2 ,Mg 1/2 )O 3 ]x-[BaTiO 3 ] 1-x . We find that [Ba(Mo 1/2 ,Mg 1/2 )O 3 ] 0.25 -[BaTiO 3 ] 0.75 is a viable candidate for use in transparent photovoltaics due to its energy bandgap of 2.6 eV in the rhombohedral phase. In all cases, [Ba(Mo 1/2 ,Mg 1/2 )O 3 ]x-[BaTiO 3 ] 1-x materials exhibit spontaneous polarization that allows the exploitation of the bulk photovoltaic effect and in principle may allow high power conversion efficiency exceeding the Shockley-Queisser limit for these materials.

14 SOLAR ENERGY↗

Critical Properties of Perovskite Manganese Oxides Pr{sub 1−x}Ba{sub x}MnO{sub 3}

The critical properties of polycrystalline Pr{sub 1−x}Ba{sub x}MnO{sub 3} (x = 0.13 and 0.23) samples prepared by using a standard ceramic fabrication method were investigated. Pr{sub 1−x}Ba{sub x}MnO{sub 3} exhibited a second-order magnetic transition. As per the modified Arrott plot method and double logarithmic M-μ{sub 0}H curve, the critical exponents (CE) were calculated as β = 0.459 ± 0.03, γ = 1.346 ± 0.02, δ = 4.32 ± 0.04, and T{sub C} ≈ 130 K, for x = 0.13, and β = 0.424 ± 0.03, γ = 1.362 ± 0.02, δ = 4.19. ± 0.03, and T{sub C} ≈ 163 K, for x = 0.23. To confirm the reliability of such CE values, the M (H) data of Pr{sub 1−x}Ba{sub x}MnO{sub 3} were checked by the scaling equation M(H, t) = |t|{sup β}f{sub ±}(H/|t|{sup β + γ}), where t=(T/(T{sub C}))−1 refers to the reduced temperature, f{sub ±} is the scaling function above (+)/below (−) T{sub C}. The β values for Pr{sub 1−x}Ba{sub x}MnO{sub 3} (x = 0.13 and 0.23) are between β = 0.365 (3D Heisenberg exponent) and β = 0.5 (mean-field exponent), whereas γ values are fairly close to γ = 1.386. This reveals long- and short-range order coexisting in Pr{sub 1−x}Ba{sub x}MnO{sub 3}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optimal measurements for quantum multiparameter estimation with general states

We generalize the approach by Braunstein and Caves, [Phys. Rev. Lett. 72, 3439 (1994)].PRLTAO0031-900710.1103/PhysRevLett.72.3439 to quantum multiparameter estimation with general states. We derive a matrix bound of the classical Fisher information matrix due to each measurement operator. The saturation of all these bounds results in the saturation of the matrix Helstrom Cramér-Rao bound. Remarkably, the saturation of the matrix bound is equivalent to the saturation of the scalar bound with respect to any given positive definite weight matrix. Necessary and sufficient conditions are obtained for the optimal measurements that give rise to the Helstrom Cramér-Rao bound associated with a general quantum state. To saturate the Helstrom bound with separable measurements or collective measurement entangling only a small number of identical states, we find it is necessary for the symmetric logarithmic derivatives to commute on the support of the state. As an important application of our results, we construct several local optimal measurements for the problem of estimating the three-dimensional separation of two incoherent optical point sources.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Thermal transistor and thermometer based on Coulomb-coupled conductors

We study a three-terminal setup consisting of a single-level quantum dot capacitively coupled to a quantum point contact. The point contact connects to a source and drain reservoir while the quantum dot is coupled to a single base reservoir. This setup has been used to implement a noninvasive, nanoscale thermometer for the bath reservoir by detecting the current in the quantum point contact. Here, we demonstrate that the device can also be operated as a thermal transistor where the average (charge and heat) current through the quantum point contact is controlled via the temperature of the base reservoir. We characterize the performances of this device both as a transistor and a thermometer and derive the operating condition maximizing their respective sensitivities. Furthermore, the present analysis is useful for the control of charge and heat flow and high precision thermometry at the nanoscale.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Bridging the Homogeneous-Heterogeneous Divide: Modeling Spin for Reactivity in Single Atom Catalysis

Single atom catalysts (SACs) are emergent catalytic materials that have the promise of merging the scalability of heterogeneous catalysts with the high activity and atom economy of homogeneous catalysts. Computational, first-principles modeling can provide essential insight into SAC mechanism and active site configuration, where the sub-nm-scale environment can challenge even the highest-resolution experimental spectroscopic techniques. Nevertheless, the very properties that make SACs attractive in catalysis, such as localized d electrons of the isolated transition metal center, make them challenging to study with conventional computational modeling using density functional theory (DFT). For example, Fe/N-doped graphitic SACs have exhibited spin-state dependent reactivity that remains poorly understood. However, spin-state ordering in DFT is very sensitive to the nature of the functional approximation chosen. In this work, we develop accurate benchmarks from correlated wavefunction theory (WFT) for relevant octahedral complexes. We use those benchmarks to evaluate optimal DFT functional choice for predicting spin state ordering in small octahedral complexes as well as models of pyridinic and pyrrolic nitrogen environments expected in larger SACs. Using these guidelines, we determine Fe/N-doped graphene SAC model properties and reactivity as well as their sensitivities to DFT functional choice. Finally, we conclude with broad recommendations for computational modeling of open-shell transition metal single-atom catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The interacting domains in cereblon differentially modulate the immunomodulatory drug-mediated ubiquitination and degradation of its binding partners

Highlights: • c-Jun, CLC-1, IKZF1, and MEIS2 interact with CRBN at different domains. • IMiDs differentially regulates the level of CRBN-interacting proteins. • IMiDs modulates the ubiquitination of CRBN-interacting proteins in three manners. • Interacting domains affect the IMiD-mediated regulation on CRBN-binding partners. Cereblon (CRBN), a substrate receptor of the cullin-4 RING E3 ligase (CRL4), has been utilized for the targeted protein degradation via small molecular weight CRBN modulators. However, it is unclear whether and how proteins that interact with CRBN at different domains are affected by these modulators. Here, we use CRBN and its four binding partners, c-Jun, chloride channel protein CLC-1, transcription factor IKZF1, and MEIS2, as model proteins to investigate the effect of immunomodulatory drugs (IMiDs) including thalidomide, lenalidomide, and pomalidomide, on their stability, ubiquitination, and interaction with CRBN. Together with previous discoveries, domain mapping experiment shows that these four proteins interact with CRBN at three distinct regions. Immunoblotting analyses reveal that the protein level of CRBN-binding partners could be enhanced, attenuated, or not affected by IMiDs. Interaction analyses and ubiquitination assay demonstrate that IMiDs modulate the interaction between CRBN and its binding partners in three distinct ways and thus differentially regulate their ubiquitination. This work suggests that the binding domain in CRBN is a critical factor which influences the regulation of IMiDs on the ubiquitination and stability of these CRBN-interacting partners.

60 APPLIED LIFE SCIENCES↗