Search NASA⌕ Search

Engineering topics

Yang, Mingrui

Publications and source records attributed to Yang, Mingrui.

Quantum Computing with Exciton Qubits in Colloidal Semiconductor Nanocrystals

The present work evaluates the feasibility of quantum computing with exciton qubits in coupled colloidal semiconductor nanocrystals (NCs). A strategy for manipulating two-qubit states of colloidal NC hetero-dimers is described. We show that a sequence of laser pulses with the same photon energy can bring excitonic states of a nanocrystal hetero-dimer into entanglement and perform arbitrary qubit rotations (quantum gates). Our simulations of a realistic two-particle assembly of CdSe/CdS core/shell NCs demonstrate that such two-qubit gate operations can be driven by optical parametric oscillators with a theoretical error of 0.1%. Furthermore, a strategy for upscaling two-qubit hetero-dimers to N-qubit exciton gates in semiconductor NC assemblies is discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tuning the Dimensionality of Excitons in Colloidal Quantum Dot Molecules

Electrically coupled quantum dots (QDs) can support unique optoelectronic properties arising from the superposition of single-particle excited states. Experimental methods for integrating colloidal QDs within the same nano-object, however, have remained elusive to the rational design. Here, we demonstrate a chemical strategy that allows for the assembling of colloidal QDs into coupled composites, where proximal interactions give rise to unique optoelectronic behavior. The assembly method employing “adhesive” surfactants was used to fabricate both homogeneous (e.g., CdS–CdS, PbS–PbS, CdSe–CdSe) and heterogeneous (e.g., PbS–CdS, CdS–CdSe) nanoparticle assemblies, exhibiting quasi-one-dimensional exciton fine structure. In addition, tunable mixing of single-particle exciton states was achieved for dimer-like assemblies of CdSe/CdS core–shell nanocrystals. The nanoparticle assembly mechanism was explained within the viscoelastic interaction theory adapted for molten-surface colloids. Furthermore, we expect that the present work will provide the synthetic and theoretical foundation needed for building assemblies of many inorganic nanocrystals.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Photoinduced Rotation of Colloidal Semiconductor Nanocrystals in an Electric Field

In this work, we demonstrate that solution-phase semiconductor nanocrystals (NCs) undergo photoinduced rotation in an external electric field. Present measurements backed by theoretical calculations show that the rotation of colloidal NCs is driven by the excited-state dipole moment, which is counterbalanced by the solvent viscosity drag. Corresponding angular velocities range from 0.5°/ns for cubic CsPbBr 3 NCs to 3°/ns for nanoparticles with a large photoinduced charge separation (CdSe/CdS core–shell and dot-in-a-rod NCs). Because of photoinduced rotation, solution-phase semiconductor NCs exhibited an order-of-magnitude increase in the spectral changes caused by the quantum confined Stark effect (QCSE), compared to solid NC assemblies. The enhanced QCSE of colloidal NCs reflected their global alignment in solution, which could be retained in a solid environment by slow crystallization. Overall, we expect that the demonstrated phenomenon of the colloidal nanocrystal rotation in an electric field will open up new avenues for developing electro-optical and voltage-sensitive applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Low-threshold laser medium utilizing semiconductor nanoshell quantum dots

Colloidal semiconductor nanocrystals (NCs) represent a promising class of nanomaterials for lasing applications. Currently, one of the key challenges facing the development of high-performance NC optical gain media lies in enhancing the lifetime of biexciton populations. This usually requires the employment of charge-delocalizing particle architectures, such as core/shell NCs, nanorods, and nanoplatelets. Here, we report on a two-dimensional nanoshell quantum dot (QD) morphology that enables a strong delocalization of photoinduced charges, leading to enhanced biexciton lifetimes and low lasing thresholds. A unique combination of a large exciton volume and a smoothed potential gradient across interfaces of the reported CdS bulk /CdSe/CdS shell (core/shell/shell) nanoshell QDs results in strong suppression of Auger processes, which was manifested in this work though the observation of stable amplified stimulated emission (ASE) at low pump fluences. An extensive charge delocalization in nanoshell QDs was confirmed by transient absorption measurements, showing that the presence of a bulk-size core in CdS bulk /CdSe/CdS shell QDs reduces exciton–exciton interactions. Altogether, present findings demonstrate unique advantages of the nanoshell QD architecture as a promising optical gain medium in solid-state lighting and lasing applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Solidification Behavior of Calcium Ferrite Under Ultrasonic Vibration

Ultrasonic vibration was applied to the solidification process of calcium ferrite (CF) to modify the grain size and improve the homogeneity of the solidified microstructure. The effects of ultrasound on microstructure, density, compressive strength, and reducibility were studied. The acoustic pressure decreased and then increased along the axis symmetry due to the attenuation of acoustic pressure and reflection of ultrasonic waves in the melt under a fixed power. When the ultrasonic power was increased, the general acoustic pressure increased, which was beneficial to the avoidance of macropores and to improvement of the microstructure. Coarse acicular CF grains were significantly refined; the grain size decreased from 1967 to 442 μm when the ultrasonic power was increased from 0 to 300 W. The density of the samples increased from 4370 to 4680 kg/m{sup 3} due to cavitation and acoustic streaming effects. Ultrasonic vibration greatly improved the ultimate compressive strength of CF; the values were 41.8 ± 2.1 to 67.3 ± 3.4 MPa for ultrasonic powers of 100 to 300 W, respectively. Without ultrasonic treatment, it was only 37.4 ± 1.9 MPa. Ultrasonic vibration also influenced the reduction time of CF due to the composition segregation in the slag during solidification.

36 MATERIALS SCIENCE↗

Solidification of Calcium Ferrite Melt Using Ultrasonic Vibration: Effect and Mechanism

Calcium ferrite (CF) is a very important binder phase in iron ore sintering processes. To improve the microstructure of CF, power ultrasound was introduced during its solidification process, and the effect of immersion depth of ultrasonic probe (IDUP) on the properties of CF was investigated in detail. The results indicated that the microstructure of CF was greatly refined; the grain size decreased from 2864 μm without ultrasonic vibration to 841 μm with ultrasonic vibration at an immersion depth of 30 mm. Without ultrasonic vibration, the density and compressive strength of CF slag were 3904 kg/m{sup 3} and 38.3 MPa, respectively. When the IDUP was increased from 10 to 30 mm, the density and compressive strength of CF increased from 4049 to 4452 kg/m{sup 3} and 52.5 to 87.3 MPa, respectively. Further, the reducibility of CF was examined. The reduction time, at the same reduction rate, decreased from 347 minutes without ultrasonic vibration to 200 minutes with ultrasonic vibration at an IDUP of 30 mm. The rate-limiting step was obviously improved, which may be attributable to the grain refinement of CF and composition segregation in the slag. In general, the properties of CF were greatly improved due to the cavitation and acoustic streaming of ultrasonic waves.

36 MATERIALS SCIENCE↗

Wetting Behavior of TiO{sub 2} by Calcium Ferrite Slag at 1523 K

The wetting behaviors of a TiO{sub 2} substrate by calcium ferrite (CF) series slags were investigated using an improved sessile drop method at 1523 K (1250 °C). The initial contact angles were in the range 35 to 50 deg, the final equilibrium apparent contact angles were < 20 deg, and the spreading durations were in the range 75 to 180 seconds. The CF-TiO{sub 2} system showed reactive wetting, which was categorized into four dynamic stages. Stage I: physical spreading, stage II: slow linear spreading, stage III: fast linear spreading, and stage IV: equilibrium. Interfacial reactions yielded CaTiO{sub 3} during reactive spreading, thereby transitioning TiO{sub 2} wetting into CaTiO{sub 3} wetting and then forming Fe{sub 2}TiO{sub 5} and FeTiO{sub 3} owing to the excess Fe{sub 2}O{sub 3} and FeO that had accumulated in the interfacial zone. Although stage III spreading was faster than stage II spreading, adding MgO to the slag slowed stage III spreading. The interfacial microstructure of the residual slag was roughly divided into three layers owing to the different densities of the slag and solid products. The top layer was composed of CaTiO{sub 3} and Fe{sub 2}O{sub 3}, the middle one was composed of CaTiO{sub 3} and Fe{sub 2}TiO{sub 5}, and the bottom one was composed of Fe{sub 2}TiO{sub 5} and FeTiO{sub 3}. Adding TiO{sub 2} to the slag produced a dense CaTiO{sub 3}-containing interfacial layer, resulting in CF being detected in the residual slag.

36 MATERIALS SCIENCE↗

Wetting Behavior of Calcium Ferrite Slags on Cristobalite Substrates

Calcium ferrite (CF) is a significant intermediate adhesive phase in high-basicity sinters. The wettability between calcium ferrite (CF) and gangue plays an important role in the assimilation process. The wettability of CF-based slags, in which a constant amount (2 mass pct.) of Al{sub 2}O{sub 3}, MgO, SiO{sub 2}, and TiO{sub 2} was added, on solid SiO{sub 2} (cristobalite) substrates at 1523 K (1250 °C) was investigated. The interfacial microstructure and spreading mechanisms were discussed for each sample. All the tested slag samples exhibited good wettability on the SiO{sub 2} substrate. The initial apparent contact angles were in the range of 20 to 50 deg, while the final apparent contact angles were ~ 5 deg. The wetting process could be divided into three stages on the basis of the change in diameter, namely the “linear spreading” stage, “spreading rate reduction” stage, and “wetting equilibrium” stage. It was found that the CF-SiO{sub 2} wetting system exhibits dissolutive wetting and the dissolution of SiO{sub 2} into slag influences its spreading process. The spreading rate increases with a decrease in the ratio of viscosity to interfacial tension, which is a result of the addition of Al{sub 2}O{sub 3}, MgO, SiO{sub 2}, and TiO{sub 2}. After cooling, a deep corrosion pit was formed in the substrate and a diffusion layer was generated in front of the residual slag zone; further, some SiO{sub 2} and Fe{sub 2}O{sub 3} solid solutions precipitated in the slag.

36 MATERIALS SCIENCE↗