Search NASA⌕ Search

Engineering topics

Yang, Ping

Publications and source records attributed to Yang, Ping.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Near-Threshold Photoemission from Graphene-Coated Cu(110)

In this article, the brightness of electron beams emitted from photocathode sources plays a critical role in determining the performance of x-ray free-electron lasers and ultrafast electron-diffraction applications. In order to achieve the maximum brightness, the electrons need to be emitted from a photocathode with the lowest-possible mean transverse energy (MTE). Recent investigations have shown that capping a Cu(110) photocathode with a monolayer of graphene can protect the quantum efficiency (QE) from long-term exposure to varying vacuum conditions. However, there have been no studies that investigate the effects that a monolayer of graphene has on the MTE. Here, we report on measurements of a graphene-coated Cu(110) single crystal near the photoemission threshold for room and liquid-nitrogen temperatures. At room temperature, a minimum MTE of 25 meV is measured at 295 nm. At liquid-nitrogen temperatures, a minimum MTE of 9 meV is measured at the photoemission threshold of 290 nm.

36 MATERIALS SCIENCE↗
DOE OSTI2023

N2-to-NH3 conversion by excess electrons trapped in point vacancies on 5f-element dioxide surfaces

Ammonia (NH 3 ) is one of the basic chemicals in artificial fertilizers and a promising carbon-free energy storage carrier. Its industrial synthesis is typically realized via the Haber−Bosch process using traditional iron-based catalysts. Developing advanced catalysts that can reduce the N 2 activation barrier and make NH 3 synthesis more efficient is a long-term goal in the field. Most heterogeneous catalysts for N 2 -to-NH 3 conversion are multicomponent systems with singly dispersed metal clusters on supporting materials to activate N 2 and H 2 molecules. Herein, we report single-component heterogeneous catalysts based on 5 f actinide dioxide surfaces (ThO 2 and UO 2 ) with oxygen vacancies for N 2 -to-NH 3 conversion. The reaction cycle we propose is enabled by a dual-site mechanism, where N 2 and H 2 can be activated at different vacancy sites on the same surface; NH 3 is subsequently formed by H − migration on the surface via associative pathways. Oxygen vacancies recover to their initial states after the release of two molecules of NH 3 , making it possible for the catalytic cycle to continue. Our work demonstrates the catalytic activities of oxygen vacancies on 5 f actinide dioxide surfaces for N 2 activation, which may inspire the search for highly efficient, single-component catalysts that are easy to synthesize and control for NH 3 conversion.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Architector

Architector is a 3D chemical structure generation software package designed to take minimal 2D information about ligands and metal centers and generates chemically sensible 3D conformers and stereochemistry of the organometallic compounds. Architector is capable of high-throughput in-silico construction of s-, p-, d-, and f-block organometallic complexes. Architector represents a transformative step towards cross-periodic table computational design of metal complex chemistry.

Yang, Ping↗
DOE OSTI2022

Interfacial antiferromagnetic phase induced two-step magnetization reversal in PbZr 0.52 Ti 0.48 O3/La 0.67 Sr 0.33 MnO 3 superlattices

Artificial multiferroic heterostructures have recently attracted much interests due to the demonstrated magnetoelectric coupling (MEC) and unique functionalities, promising a tantalizing perspective of novel applications in next-generation electronic, memory, sensor, and energy harvesting technologies. Herein, we report a two-step magnetization reversal in PbZr 0.52 Ti 0.48 O 3 /La 0.67 Sr 0.33 MnO 3 (PZT/LSMO) superlattices, which originates from the strongly entangled strain-, ferroelectric (FE)-polarization-, and exchange-dependent effects. Specifically, the preferential occupancy of the in-plane Mn d x 2 -y 2 orbitals is triggered via the collective effects of the large tensile strain and FE polarization, giving rise to an interfacial antiferromagnetic (AFM) layer with strong AFM anisotropy. The strong spin exchange coupling between the AFM layer and the adjacent ferromagnetic (FM) layer facilitates the magnetic stratification of the FM layer, leading to two coercivities, i.e., two-step magnetization reversal. Meanwhile, a sizeable exchange bias (EB) field is induced. The emerged two-step magnetization reversal concomitant with the pronounced EB phenomenon should be a signature of an enhanced MEC in PZT/LSMO superlattices. Finally, our results will stimulate further interests in multiferroic superlattices in applications of multiferroic-based devices.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Induced Ferromagnetism in Epitaxial Uranium Dioxide Thin Films

Abstract Actinide materials have various applications that range from nuclear energy to quantum computing. Most current efforts have focused on bulk actinide materials. Tuning functional properties by using strain engineering in epitaxial thin films is largely lacking. Using uranium dioxide (UO 2 ) as a model system, in this work, the authors explore strain engineering in actinide epitaxial thin films and investigate the origin of induced ferromagnetism in an antiferromagnet UO 2 . It is found that UO 2+ x thin films are hypostoichiometric ( x <0) with in‐plane tensile strain, while they are hyperstoichiometric ( x >0) with in‐plane compressive strain. Different from strain engineering in non‐actinide oxide thin films, the epitaxial strain in UO 2 is accommodated by point defects such as vacancies and interstitials due to the low formation energy. Both epitaxial strain and strain relaxation induced point defects such as oxygen/uranium vacancies and oxygen/uranium interstitials can distort magnetic structure and result in magnetic moments. This work reveals the correlation among strain, point defects and ferromagnetism in strain engineered UO 2+ x thin films and the results offer new opportunities to understand the influence of coupled order parameters on the emergent properties of many other actinide thin films.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Hydrazine Energy Storage: Displacing N 2 H 4 from the Metal Coordination Sphere

Hydrogen carriers, such as hydrazine (N 2 H 4 ), may facilitate long duration energy storage, a vital component for resilient grids by enabling more renewable energy generation. Lanthanide coordination chemistry with N 2 H 4 as well as efforts to displace N 2 H 4 from the metal coordination sphere to develop an efficient catalytic production cycle were detailed. Modeling the equilibrium of different ligand coordination, it was predicted that strong sigma donor molecules would be required to displace N 2 H 4 . Monitoring competition experiments with nuclear magnetic resonance confirmed that trimethyl phosphine oxide, dimethylformamide, and dimethyl sulfoxide displaced N 2 H 4 in large or small lanthanide complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Origin of giant electric-field-induced strain in faulted alkali niobate films

A large electromechanical response in ferroelectrics is highly desirable for developing high-performance sensors and actuators. Enhanced electromechanical coupling in ferroelectrics is usually obtained at morphotropic phase boundaries requiring stoichiometric control of complex compositions. Recently it was shown that giant piezoelectricity can be obtained in films with nanopillar structures. Here, we elucidate its origin in terms of atomic structure and demonstrate a different system with a greatly enhanced response. This is in non-stoichiometric potassium sodium niobate epitaxial thin films with a high density of self-assembled planar faults. A giant piezoelectric coefficient of ~1900 picometer per volt is demonstrated at 1 kHz, which is almost double the highest ever reported effective piezoelectric response in any existing thin films. The large oxygen octahedral distortions and the coupling between the structural distortion and polarization orientation mediated by charge redistribution at the planar faults enable the giant electric-field-induced strain. Our findings demonstrate an important mechanism for realizing the unprecedentedly giant electromechanical coupling and can be extended to many other material functions by engineering lattice faults in non-stoichiometric compositions.

36 MATERIALS SCIENCE↗
DOE OSTI2022

An Allyl Uranium(IV) Sandwich Complex: Are ϕ Bonding Interactions Possible?

Abstract A method to explore head‐to‐head ϕ back‐bonding from uranium f‐orbitals into allyl π* orbitals has been pursued. Anionic allyl groups were coordinated to uranium with tethered anilide ligands, then the products were investigated by using NMR spectroscopy, single‐crystal XRD, and theoretical methods. The (allyl)silylanilide ligand, N ‐((dimethyl)prop‐2‐enylsilyl)‐2,6‐diisopropylaniline (LH), was used as either the fully protonated, singly deprotonated, or doubly deprotonated form, thereby highlighting the stability and versatility of the silylanilide motif. A free, neutral allyl group was observed in UI 2 (L1) 2 ( 1 ), which was synthesized by using the mono‐deprotonated ligand [K][ N ‐((dimethyl)prop‐2‐enyl)silyl)‐2,6‐diisopropylanilide] (L1). The desired homoleptic sandwich complex U[L2] 2 ( 2 ) was prepared from all three ligand precursors, but the most consistent results came from using the dipotassium salt of the doubly deprotonated ligand [K] 2 [ N ‐((dimethyl)propenidesilyl)‐2,6‐diisopropylanilide] (L2). This allyl‐based sandwich complex was studied by using theoretical techniques with supporting experimental spectroscopy to investigate the potential for phi (ϕ) back‐bonding. The bonding between U IV and the allyl fragments is best described as ligand‐to‐metal electron donation from a two carbon fragment‐localized electron density into empty f‐orbitals.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2022

Innovative Separations Research and Development Needs for Advanced Fuel Cycles

Deployment of advanced nuclear reactors will inevitably introduce new challenges for devising and implementing an efficient, safe, and economical nuclear fuel cycle that meets society’s need for clean energy and expectations for environmental stewardship. The growing urgency for decarbonizing the US and global economies makes such technological challenges all the more compelling. The Office of Materials and Chemical Technologies within US Department of Energy’s Office of Nuclear Energy stewards the capabilities and knowledge relied upon by government policy makers to make informed decisions regarding nuclear fuel cycle options. Such decisions in turn rely on the development of efficient and economical separation methods that can accept the used nuclear fuel containing actinides and fission products (FPs) to recycle selected actinides, recover valuable by-products, and deliver waste streams that are suitable for disposal. To help guide the future direction of fuel cycle separations research, taking into account emerging technologies, the Office of Materials and Chemical Technologies sponsored the Innovative Separations R&D Needs for Advanced Fuel Cycles workshop, held virtually August 30–September 1, 2021. Based upon 60 contributed white papers, 6 plenary lectures, and 3 days of discussions, the outcome of the workshop and subsequent deliberations was the generation of this report identifying seven future research directions (FRDs) plus three crosscutting areas of research.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Performance of Cloud 3D Solvers in Ice Cloud Shortwave Radiation Closure Over the Equatorial Western Pacific Ocean

Abstract For retrieving cloud optical properties from satellite images or computing these properties from climate model output, computationally efficient treatments of cloud horizontal inhomogeneity include the Monte Carlo Independent Column Approximation (McICA) and the Tripleclouds method. Computationally efficient treatment of cloud horizontal radiation exchanges includes the SPeedy Algorithm for Radiative TrAnsfer through CloUd Sides (SPARTACUS). As a test to derive properties from satellite images, we collocate Moderate Resolution Imaging Spectroradiometer (MODIS) cloud retrievals with near‐nadir Cloud and the Earth's Radiant Energy System (CERES) footprints in July 2008 over an equatorial western Pacific Ocean region to compare the performance of the McICA, Tripleclouds, and SPARTACUS solvers to the conventional plane‐parallel homogeneous (PPH) treatment. PPH overestimates cloud albedo, and the three solvers effectively reduce overestimation with root mean square error of shortwave upwelling irradiance decreasing between 15.72 and 18.53 W m −2 , or about 22%–25%. Although cloud top variability does not get fed into the simulations, all three solvers also reduce the effect of cloud top variability on cloud albedo. Entrapment (energy reflected downward from clouds) and horizontal radiation transfer have opposite effects on the SPARTACUS cloud albedo simulation. The net effect depends on the cloud vertical extent, the unawareness of which limits the performance of the SPARTACUS solver.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Incorporate More Realistic Surface-Atmosphere Radiative Coupling in E3SM

Over the course of this project, we have successfully carried out proposed studies and reported our findings in leading peer-reviewed journals and national/international conferences. So far, we have published three peer-reviewed articles reporting such findings and contributed to other two peer-reviewed articles. One Ph.D. dissertation has been produced based on the work done in this project. Two additional manuscripts incurred from this project are currently under reviews. We have made 15 presentations at national and international conferences about the results from this project, as well as eight presentations at the E3SM all-hands meeting. We were also selected last year by the BER to continue this line of work, in close collaborations with the E3SM core model developers.

54 ENVIRONMENTAL SCIENCES↗