Search NASA⌕ Search

Engineering topics

Yang, Ping

Publications and source records attributed to Yang, Ping.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Seasonal Dependent Impact of Ice Cloud Longwave Scattering on the Polar Climate

Most climate models neglect cloud longwave (LW) scattering because scattering is considered negligible compared to strong LW absorption by clouds and greenhouse gases. While this rationale is valid for simulating extrapolar regions, it is questionable for the polar regions, where the atmosphere is dry and hence has weak absorption, and ice clouds that have strong scattering capability frequently occur. Using the slab-ocean Community Earth System Model, we show that ice cloud LW scattering can warm winter surface air temperature by 0.8–1.8 K in the Arctic and 1.3–1.9 K in the Antarctic, while this warming becomes much weaker in polar summer. Such scattering effect cannot be correctly assessed when sea surface temperature and sea ice are prescribed as this effect is manifested through a surface-atmosphere coupling. Furthermore, cloud LW scattering is a necessity for the correct simulation of polar climate and surface radiation budget, especially in the winter.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Unraveling the structural stability and the electronic structure of ThO 2 clusters

Unraveling the correlations between the geometry, the relative energy and the electronic structure of metal oxide nanostructures is crucial for a better control of their size, shape and properties. Here, we investigated these correlations for stoichiometric thorium dioxide clusters ranging from ThO 2 to Th 8 O 16 using a chemically-driven geometry search algorithm in combination with state-of-the-art first principles calculations. This strategy allows us to homogeneously screen the potential energy surface of actinide oxide clusters for the first time. It is found that the presence of peroxo and superoxo groups tends to increase the total energy of the system by at least 3.5 eV and 7 eV, respectively. For the larger clusters, the presence of terminal oxygen atoms increases the energy by about 0.5 eV. Regarding the electronic structure, it is found that the HOMO–LUMO gap is larger in systems containing only bridging oxygen atoms (~2–3.5 eV) than for systems containing oxo groups (~1–3 eV), peroxo groups (~0–2 eV), and superoxo groups (~0–1 eV). Furthermore, while the LUMO is always dominated by thorium orbitals, the composition of the HOMO changes in the presence or the absence of oxo, peroxo and/or superoxo groups: in the presence of peroxo groups, it is dominated by thorium orbitals, in all other cases, it is dominated by oxygen orbitals, and is rather localized in the presence of terminal oxo or superoxo groups. These correlations are of great interest for synthesizing clusters with tailored properties, especially for applications in the field of nuclear energy and heterogeneous catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Expanding the potential of redox carriers for flow battery applications

Here, using theoretical modeling to guide our approach, substituents were selected to improve the negative and positive potentials associated with a representative metal-based redox carrier, a phenyl spaced nickel bispicolinamide complex, [Ni(bpb)], 1. To broaden the cell potential, electron donating groups were selected and installed on the pyridyl moieties, [Ni(bpb-(NMe 2 ) 2 )], 2, while electron withdrawing groups were incorporated on the phenyl linker, [Ni(bpb-R)] (R = –F, –CF 3 , and –NO 2 ), 3–5. Our model predicts an increase of ~300 mV and ~500 mV for the first and second negative waves of Ni(bpb-NMe 2 ), 2, and up to ~330 mV and ~210 mV increase to the first and second positive waves in 3–5. The modeled complexes were synthesized in good yields using a modification of the literature procedure. Due to limited solubility, the differential pulse voltammetry was measured on complexes 2–5 using a drop cast technique. Comparison of the observed and predicted potentials is discussed in acetonitrile (MeCN) and dimethylformamide (DMF) solvents.

25 ENERGY STORAGE↗
DOE OSTI2020

CERES MODIS Cloud Product Retrievals for Edition 4--Part I: Algorithm Changes

The Edition 2 (Ed2) cloud property retrieval algorithm system was upgraded and applied to the MODerate-resolution Imaging Spectroradiometer (MODIS) data for the Clouds and the Earth's Radiant Energy System (CERES) Edition 4 (Ed4) products. New calibrations for solar channels and the use of the 1.24-μm channel for cloud optical depth (COD) over snow improve the daytime consistency between Terra and Aqua MODIS retrievals. Use of additional spectral channels and revised logic enhanced the cloud-top phase retrieval accuracy. A new ice crystal reflectance model and a CO₂-channel algorithm retrieved higher ice clouds, while a new regional lapse rate technique produced more accurate water cloud heights than in Ed2. Ice cloud base heights are more accurate due to a new cloud thickness parameterization. Overall, CODs increased, especially over the polar (PO) regions. The mean particle sizes increased slightly for water clouds, but more so for ice clouds in the PO areas. New experimental parameters introduced in Ed4 are limited in utility, but will be revised for the next CERES edition. As part of the Ed4 retrieval evaluation, the average properties are compared with those from other algorithms and the differences between individual reference data and matched Ed4 retrievals are explored. Part II of this article provides a comprehensive, objective evaluation of selected parameters. More accurate interpretation of the CERES radiation measurements has resulted from the use of the Ed4 cloud properties.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Giant piezoelectricity in oxide thin films with nanopillar structure

High-performance piezoelectric materials are critical components for electromechanical sensors and actuators. For more than 60 years, the main strategy for obtaining large piezoelectric response has been to construct multiphase boundaries, where nanoscale domains with local structural and polar heterogeneity are formed, by tuning complex chemical compositions. We used a different strategy to emulate such local heterogeneity by forming nanopillar regions in perovskite oxide thin films. We obtained a giant effective piezoelectric coefficient d 33 , f * of ~1098 picometers per volt with a high Curie temperature of ~450°C. Our lead-free composition of sodium-deficient sodium niobate contains only three elements (Na, Nb, and O). The formation of local heterogeneity with nanopillars in the perovskite structure could be the basis for a general approach to designing and optimizing various functional materials.

Science & Technology - Other Topics↗
DOE OSTI2020

Structural and Optical Properties of Phase-Pure UO 2 , α-U 3 O 8 , and α-UO 3 Epitaxial Thin Films Grown by Pulsed Laser Deposition

Fundamental understanding of the electronic, chemical, and structural properties of uranium oxides requires the synthesis of high-crystalline-quality epitaxial films of different polymorphs of one material or different phases with various oxygen valence states. Here we report the growth of single-phase epitaxial UO 2 , α-U 3 O 8 , and α-UO 3 thin films using pulsed laser deposition. Both oxygen partial pressure and substrate temperature play critical roles in determining the crystal structure of the uranium oxide films. X-ray diffraction and Raman spectroscopy demonstrate that the films are single phase with excellent crystallinity and epitaxially grown on a variety of substrates. Chemical valance states and optical properties of epitaxial uranium oxide films are studied by X-ray photoelectron spectroscopy and UV–vis spectroscopy, which further confirm the high-quality stoichiometric phase-pure uranium oxide thin films. Epitaxial UO2 films show a direct band gap of 2.61 eV, while epitaxial α-UO 2 , α-U 3 O 8 and α-UO 3 films exhibit indirect band gaps of 1.89 and 2.26 eV, respectively. The ability to grow high-quality epitaxy actinide oxide thin films and to access their different phases and polymorphous will have significant benefits to the future applications in nuclear science and technology.

36 MATERIALS SCIENCE↗
DOE OSTI2020

High-pressure structural behavior and elastic properties of U3Si5: A combined synchrotron XRD and DFT study

We present an integrated experimental and theoretical study of the structural behavior of U 3 Si 5 at highpressure conditions using angle-dispersive synchrotron X-ray diffraction (XRD) in a diamond anvil cell (DAC) and density functional theory (DFT) calculations. On increasing pressure, the ambient hexagonal structure of U 3 Si 5 with space group P6/mmm remains stable up to 16.7 GPa, the maximum pressure tested with DAC. The bulk modulus and the a- and c-axial moduli of U 3 Si 5 were experimentally determined to be 126 ± 4 GPa, 173 ± 8 GPa and 79.7 ± 4.3 GPa, respectively. Thus an anisotropy in the axial compressibility of U 3 Si 5 is observed with its c-axis being more compressible than the a-axis. Our DFT calculation results are in general agreement with the experimental values, including reproducing the compressibility anisotropy. A comparison of the bulk modulus of U 3 Si 5 to those of other U-Si compounds reveals a general trend that the bulk modulus of U-Si decreases with increasing U/(U+Si) ratio.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Water on Actinide Dioxide Surfaces: A Review of Recent Progress

The fluorite structured actinide dioxides (AnO 2 ), especially UO 2 , are the most common nuclear fuel materials. A comprehensive understanding of their surface chemistry is critical because of its relevance to the safe handling, usage, and storage of nuclear fuels. Because of the ubiquitous nature of water (H 2 O), its interaction with AnO 2 has attracted significant attention for its significance in studies of nuclear fuels corrosion and the long-term storage of nuclear wastes. The last few years have seen extensive experimental and theoretical studies on the H 2 O–AnO 2 interaction. Herein, we present a brief review of recent advances in this area. We focus on the atomic structures of AnO 2 surfaces, the surface energies, surface oxygen vacancies, their influence on the oxidation states of actinide atoms, and the adsorption and reactions of H 2 O on stoichiometric and reduced AnO 2 surfaces. Finally, a summary and outlook of future studies on surface chemistry of AnO 2 are given. We intend for this review to encourage broader interests and further studies on AnO 2 surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Analysis of the thermodynamic stability of ThO 2 and UO 2 surfaces in the presence of surfactant ligands

Nanocrystals (NCs) with size and shape dependent properties are a thriving research field. Remarkable progress has been made in the controlled synthesis of NCs of stable elements in the past two decades; however, the knowledge of the NCs of actinide compounds has been considerably limited due the difficulties in handling them both experimentally and theoretically. Actinide compounds, especially actinide oxides, play a critical role in many stages of the nuclear fuel cycle. Recently, a non-aqueous surfactant assisted approach has been developed for the synthesis of actinide oxide NCs with different morphologies, but an understanding of its control factors is still missing to date. Herein we present a comprehensive study on the low index surfaces of thorium dioxide (ThO 2 ) and their interactions with relevant surfactant ligands using density functional calculations. A systematic picture on the thermodynamic stability of ThO 2 NCs of different sizes and shapes is obtained employing empirical models based on the calculated surface energies. It is found that bare ThO 2 NCs prefer the octahedral shape terminated by (111) surfaces. Oleic acid displays selective adsorption on the (110) surface, leading to the shape transformation from octahedrons to nanorods. Other ligands such as acetylacetone, oleylamine, and trioctylphosphine oxide do not modify the equilibrium shape of ThO 2 NCs. This work provides atomic level insights into the anisotropic growth of ThO 2 NCs that was recently observed in experiments, and thus may contribute to the controlled synthesis of actinide oxide NCs with well-defined size and shape for future applications.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

Graphene as reusable substrate for bialkali photocathodes

Bialkali photocathodes, such as cesium potassium antimonide (CsK 2 Sb), can generate a high-brightness electron beam using a high-power green laser. These photocathode materials have potential applications in advanced accelerators and electron microscopes. It is known that the quantum efficiency (QE) of these photocathodes is affected severely by their substrates; however, reusability of the substrates is not well known. Here, we use graphene, silicon (Si), and molybdenum (Mo) substrates to evaluate the effects of substrates on the QE of redeposited CsK 2 Sb photocathodes after thermal cleanings. We found the QE of CsK 2 Sb photocathodes redeposited on a graphene substrate after a thermal cleaning at 500 °C remained largely unchanged. On the other hand, the QE of redeposited photocathodes on Si and Mo substrates after thermal cleaning at the same temperature decreased drastically. We used X-ray photoelectron spectroscopy (XPS) to quantitatively evaluate the residues of photocathodes after thermal cleaning at 400 °C and 500 °C. We found that the Sb, K, and Cs are removed by thermal cleaning at 500 °C for the graphene substrate, but all or the majority of these elements remained on the Si and Mo substrates. The results were consistent with our density functional theory (DFT) calculations for the case of Si, which we investigated. Furthermore, our angle-resolved photoemission spectroscopy (ARPES) on graphene indicated that its intrinsic electronic structure is preserved after photocathode deposition and thermal cleaning at 500 °C. Hence, we attributed the difference in amount of photocathode residue to the unique dangling-bond- free surface of inert graphene. Our results provide a foundation for graphene-based reusable substrates for high-QE semiconductor photocathodes.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Impact of Cloud Longwave Scattering on Radiative Fluxes Associated With the Madden-Julian Oscillation in the Indian Ocean and Maritime Continent

Previous studies suggested that cloud longwave radiation contributes to the development and maintenance of the Madden-Julian Oscillation (MJO) and model-based convection is highly sensitive to the radiation scheme. However, currently used radiation schemes do not take cloud longwave scattering into account, resulting in an overestimation of the outgoing longwave radiation (OLR) and an underestimation of the downward longwave flux at the surface. We use combined active and passive satellite cloud property retrievals to quantify the one-layer cloud OLR and heating rate (HR) biases introduced by neglecting cloud longwave scattering in the Indian Ocean and Maritime Continent in the context of MJO, with a focus on its phases 3, 5, and 6. Here, the results show that the satellite-detected one-layer cloud area consists primarily of ice clouds, particularly during the boreal winter in the 4-year study period. An increased ice cloud area fraction of one-layer cloud groups is present up to 5 days before the onset of MJO events. If longwave scattering is neglected, the composite mean OLR overestimation over the one-layer ice cloud area from 5 days before to 4 days after the MJO passage is approximately 3.5 to 5.0 W m –2 . Neglecting longwave scattering also leads to a HR underestimation at cloud base and an overestimation at cloud top, making the base-to-top heating gradient less sharp at the cloud-resolving scale.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Magnetic asymmetry induced anomalous spin-orbit torque in IrMn

We demonstrate an anomalous spin-orbit torque induced by the broken magnetic symmetry in the antiferromagnet IrMn. We study the magnetic structure of three phases of IrMn thin films using neutron diffraction technique. The magnetic mirror symmetry M ' is broken laterally in both L 1 0 - IrMn and L 1 2 - IrM n 3 but not γ - IrM n 3 . We observe an out-of-plane dampinglike spin-orbit torque in both L 1 0 - IrMn /permalloy and L 1 2 - IrM n 3 /permalloy bilayers but not in γ - IrM n 3 /permalloy. This is consistent with both the symmetry analysis on the effects of a broken M ' on spin-orbit torque and the theoretical predictions of the spin Hall effect and the Rashba-Edelstein effect. In addition, the measured spin-orbit torque efficiencies are 0.61 ± 0.01, 1.01 ± 0.03, and 0.80 ± 0.01 for the L 1 0 , L 1 2 , and γ phases, respectively. Our work highlights the critical roles of the magnetic asymmetry in spin-orbit torque generation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Crystallographic orientation and spatially resolved damage in a dispersion-hardened Al alloy

The in-situ neutron diffraction technique, in combination with both the full-field crystal elasto-viscoplastic finite element model and microstructural characterization, was used to study the deformation-induced damage anisotropy in a commercial Al alloy, subjected to uniaxial tensile and cyclic loading. The simulations capture well the crystallographic-orientation-dependent lattice strain behavior. The hard grains, e.g. those orientated with the <111> and <422> orientations parallel with the uniaxial loading direction (LD), feature large Taylor factors and seem more prone to form damage-related band structures. Their effective elastic moduli decrease with the accumulation of damage, which are different from the soft grains orientated with the <200> orientation along the LD. Correlation between the distribution of voids and that of the residual lattice strain developed after failure may exist. The maximum tensile type residual lattice strain observed after failure may be resulted from the band structure formed in the hardest <111> grains. It was revealed that the band structure triggered by the hard particles could be one of sources of damage. In addition, while the specimen was obviously damaged, a fast stress relief was evidenced after unloading from the tension, especially at the beginning of unloading. Our present investigations provide a novel method for exploring the damage mechanisms of polycrystalline materials during plastic deformation.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Hyperspectral X-ray Imaging with TES Detectors for Nanoscale Chemical Speciation Mapping

We are developing an imaging capability (“Hyperspectral X-ray Imaging”) for mapping chemical information (molecular formula, phase, oxidation state, hydration) that is based on ultra-high-resolution X-ray emission spectroscopy with large transition-edge sensor microcalorimeter arrays in the scanning electron microscope. By combining microcalorimeter arrays with hundreds of pixels, high-bandwidth microwave frequency-division multiplexing, and fast digital electronics for near real-time data processing, our goal is to enable measurements using laboratory-scale instrumentation rather than synchrotron beamlines. Our application focus here is on mapping the chemical form of uranium compounds on the nanoscale. Furthermore, we will present our approach to developing the Hyperspectral X-ray Imaging capability, progress toward a 128-pixel microwave multiplexed X-ray fluorescence instrument at LANL, and the path to high-throughput nanoscale chemical mapping.

47 OTHER INSTRUMENTATION↗