Navier-Stokes flow simulation of the Space Shuttle Main Engine hot gas manifold
Explore the source record for details and available documents.
Yang, R.-J.↗
Engineering topics
Yang, R.-J.
Publications and source records attributed to Yang, R.-J..
Numerical solutions of 2-D multi-stage rotor/stator unsteady flow interactions
The Rai method of single-stage rotor/stator flow interaction is extended to handle multistage configurations. In this study, a two-dimensional Navier-Stokes multi-zone approach was used to investigate unsteady flow interactions within two multistage axial turbines. The governing equations are solved by an iterative, factored, implicit finite-difference, upwind algorithm. Numerical accuracy is checked by investigating the effect of time step size, the effect of subiteration in the Newton-Raphson technique, and the effect of full viscous versus thin-layer approximation. Computer results compared well with experimental data. Unsteady flow interactions, wake cutting, and the associated evolution of vortical entities are discussed.
Yang, R.-J.↗
Numerical study of spherical Taylor-Couette flow
A new technique to simulate Taylor vortices in a spherical gap between a rotating inner sphere and a stationary outer one has been developed and tested. Paths leading to zero-, one-, and two-vortex flows are designed heuristically. Fictitious symmetric boundaries near the equator are imposed, and the choice of the location of the fictitious boundaries is determined by either one- or two-vortex flow being stimulated. The imposition of one or two fictitious boundaries during the initial calculation generates the state suitable for one-or two-vortex flow to exist. After removing the fictitious boundaries, the flow settles down into its own attractor. Using this method, the three steady flow modes can be simulated by using a half domain. The technique can converge to desired flows very fast, and its results show excellent agreement with experimental ones.
Yang, R.-J.↗
Numerical simulation methods of incompressible flows and an application to the Space Shuttle main engine
This paper discusses incompressible Navier-Stokes solution methods with an emphasis on the pseudocompressibility method. A steady-state flow solver based on the pseudocompressibility approach is then described. This flow solver code has been used to analyze the internal flow in the Space Shuttle main engine hot-gas manifold. Salient features associated with this three-dimensional realistic flow simulation are discussed. Numerical solutions relevant to the current engine analysis and the redesign effort are discussed along with experimental results. This example demonstrates the potential of computational fluid dynamics as a design tool for aerospace applications.
Chang, J. L. C.↗
Numerical simulation methods of incompressible flows and an application to the space shuttle main engine
Incompressible Navier-Stokes solution methods are discussed with an emphasis on the pseudocompressibility method. A steady-state flow solver based on the pseudocompressibility approach is then described. This flow-solver code was used to analyze the internal flow in the Space Shuttle main engine hot-gas manifold. Salient features associated with this three-dimensional realistic flow simulation are discussed. Numerical solutions relevant to the current engine analysis and the redesign effort are discussed along with experimental results. This example demonstrates the potential of computational fluid dynamics as a design tool for aerospace applications.
Chang, J. L. C.↗
Unsteady aerodynamics of rotor-stator interaction in a turbine stage
The two-dimensional, compressible, unsteady, thin-layer Navier-Stokes equations have been used to study the turbulent flow field of a turbine rotor/stator configuration in the high pressure oxidizer turbopump of the Space Shuttle main engine. The calculations were performed on a system of patched and overlaid grids. The grid system consists of 'O-' and 'H-' grids, with the inner 'O-'grid enclosing the blade surface for an accurate resolution of the leading and trailing edges, while the outer 'H-'grid makes the treatment of boundary conditions easier. The integration scheme used is an iterative, factored, implicit method with numerical fluxes evaluated by the third-order accurate upwind-biased Osher scheme. Computed results in the form of pressure contours, Mach number contours, time-averaged surface pressure, unsteady pressure amplitude and unsteady velocity vectors are presented. Many flow phenomena, such as wake cutting by rotor airfoils and evolution of unsteady passage vortices, are discussed.
Yang, R.-J.↗
Shape optimization of three-dimensional stamped and solid automotive components
The shape optimization of realistic, 3-D automotive components is discussed. The integration of the major parts of the total process: modeling, mesh generation, finite element and sensitivity analysis, and optimization are stressed. Stamped components and solid components are treated separately. For stamped parts a highly automated capability was developed. The problem description is based upon a parameterized boundary design element concept for the definition of the geometry. Automatic triangulation and adaptive mesh refinement are used to provide an automated analysis capability which requires only boundary data and takes into account sensitivity of the solution accuracy to boundary shape. For solid components a general extension of the 2-D boundary design element concept has not been achieved. In this case, the parameterized surface shape is provided using a generic modeling concept based upon isoparametric mapping patches which also serves as the mesh generator. Emphasis is placed upon the coupling of optimization with a commercially available finite element program. To do this it is necessary to modularize the program architecture and obtain shape design sensitivities using the material derivative approach so that only boundary solution data is needed.
Botkin, M. E.↗
Calculations of two and three-dimensional transonic cascade flow fields using the Navier-Stokes equations
The multidimensional, ensemble-averaged, compressible, time-dependent Navier-Stokes equations have been used to study the turbulent flow field in two and three-dimensional turbine cascades. The viscous regions of the flow were resolved and non-slip boundary conditions were utilized on solid surfaces. The calculations were performed in a constructive 'O'-type grid which allows representation of the blade rounded trailing edge. Converged solutions were obtained in relatively few time steps (about 80-150) and comparisons for both surface pressure and heat transfer showed good agreement with data. The three-dimensional turbine cascade calculation showed many of the expected flow-field features.
Weinberg, B. C.↗