Search NASA⌕ Search

Engineering topics

Yang, Shize

Publications and source records attributed to Yang, Shize.

54 records · Page 3

Entropy‐Maximized Synthesis of Multimetallic Nanoparticle Catalysts via a Ultrasonication‐Assisted Wet Chemistry Method under Ambient Conditions

Abstract A facile ultrasonication‐assisted wet chemistry method for preparing multicomponent alloy nanoparticles (NPs) including high‐entropy alloys (HEAs) is reported. PtAuPdRhRu alloy (HEA), quaternary PtAuPdRh alloy, and ternary PtAuPd alloy NPs are produced with ≈3 nm in diameter. Taking advantage of the acoustic cavitation phenomenon in ultrasonication process, noble metal precursors could be co‐reduced by chemical reductants and transform to alloy structures under operation at room conditions. The instantaneous massive energy (≈5000 °C, 2000 atm) occurring in momentary timespans (≤10 −9 s) contributes to the formation of multimetallic mixed nanomaterials driven by entropy maximization. Owing to strong synergistic effects, the catalysts with the HEA NPs supported on carbons exhibit prominent electrocatalytic activities for hydrogen evolution reaction.

Liu, Miaomiao↗

Coordination-supported organic polymers: mesoporous inorganic–organic materials with preferred stability

Here, a simple and versatile strategy, borrowing ideas from the chemistry of MOFs and COFs, is developed for the synthesis of coordination-supported organic polymers (COPs) via coordination between Al 3+ and 5-amino-8-hydroxyquinoline together with organic imine- or imide-based polycondensation. The COPs with high surface areas (up to 1123 m 2 g -1 ) and abundant mesopores (2.5 nm or 14 nm) possess good crystalline and porous structure after being soaked in boiling water.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Graphene Oxide‐Template Controlled Cuboid‐Shaped High‐Capacity VS 4 Nanoparticles as Anode for Sodium‐Ion Batteries

Abstract Room‐temperature sodium‐ion batteries have attracted great attentions for large‐scale energy storage applications in renewable energy. However, exploring suitable anode materials with high reversible capacity and cyclic stability is still a challenge. The VS 4 , with parallel quasi‐1D chains structure of V 4+ (S 2 2− ) 2 , which provides large interchain distance of 5.83 Å and high capacity, has showed great potential for sodium storage. Here, the uniform cuboid‐shaped VS 4 nanoparticles are prepared as anode for sodium‐ion batteries by the controllable of graphene oxide (GO)‐template contents. It exhibits superb electrochemical performances of high‐specific charge capacity (≈580 mAh·g −1 at 0.1 A·g −1 ), long‐cycle‐life (≈98% retain at 0.5 A·g− 1 after 300 cycles), and high rates (up to 20 A·g −1 ). In addition, electrolytes are optimized to understand the sodium storage mechanism. It is thus demonstrated that the findings have great potentials for the applications in high‐performance sodium‐ion batteries.

Wang, Sizhe↗

Ambipolar ferromagnetism by electrostatic doping of a manganite

Complex-oxide materials exhibit physical properties that involve the interplay of charge and spin degrees of freedom. However, an ambipolar oxide that is able to exhibit both electron-doped and hole-doped ferromagnetism in the same material has proved elusive. Here we report ambipolar ferromagnetism in LaMnO 3 , with electron-hole asymmetry of the ferromagnetic order. Starting from an undoped atomically thin LaMnO 3 film, we electrostatically dope the material with electrons or holes according to the polarity of a voltage applied across an ionic liquid gate. Magnetotransport characterization reveals that an increase of either electron-doping or hole-doping induced ferromagnetic order in this antiferromagnetic compound, and leads to an insulator-to-metal transition with colossal magnetoresistance showing electron-hole asymmetry. These findings are supported by density functional theory calculations, showing that strengthening of the inter-plane ferromagnetic exchange interaction is the origin of the ambipolar ferromagnetism. The result raises the prospect of exploiting ambipolar magnetic functionality in strongly correlated electron systems.

36 MATERIALS SCIENCE↗

Ultra-Stable and High-Cobalt-Loaded Cobalt@Ordered Mesoporous Carbon Catalysts: All-in-One Deoxygenation of Ketone into Alkylbenzene

Catalytic deoxygenation represents a straightforward and core methodology for fine-chemical production and biomass upgrading. Generally, the application of homogeneous metal complexes or heterogeneous noble-metal catalysts prevails in academia and the chemical industry. We introduce cobalt@ordered mesoporous carbon (Co@OMC) catalysts, which are constructed conveniently by a mechanochemical coordination self-assembly based on a renewable tannin precursor. Importantly, the Co@OMC catalysts with a high loading of in situ confined Co species promote the selective deoxygenation of various ketones, aldehydes, and alcohols efficiently into the corresponding alkanes under mild conditions. Therefore, a simple, inexpensive, and heterogeneous catalyst for selective deoxygenation can be expected, meanwhile the solid-state synthesis affords a green, rapid, and scalable pathway to Co@OMC catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrochemical CO 2 Reduction with Atomic Iron-Dispersed on Nitrogen-Doped Graphene

Electrochemical reduction of CO 2 provides an opportunity to reach a carbon-neutral energy recycling regime, in which CO 2 emissions from fuel use are collected and converted back to fuels. The reduction of CO 2 to CO is the first step toward the synthesis of more complex carbon-based fuels and chemicals. Therefore, understanding this step is crucial for the development of high-performance electrocatalyst for CO 2 conversion to higher order products such as hydrocarbons. In this paper, atomic iron dispersed on nitrogen-doped graphene (Fe/NG) is synthesized as an efficient electrocatalyst for CO 2 reduction to CO. Fe/NG has a low reduction overpotential with high Faradic efficiency up to 80%. The existence of nitrogen-confined atomic Fe moieties on the nitrogen-doped graphene layer is confirmed by aberration-corrected high-angle annular dark-field scanning transmission electron microscopy and X-ray absorption fine structure analysis. The Fe/NG catalysts provide an ideal platform for comparative studies of the effect of the catalytic center on the electrocatalytic performance. Finally, the CO 2 reduction reaction mechanism on atomic Fe surrounded by four N atoms (Fe–N 4 ) embedded in nitrogen-doped graphene is further investigated through density functional theory calculations, revealing a possible promotional effect of nitrogen doping on graphene.

36 MATERIALS SCIENCE↗

Enhancing the photoresponse and photocatalytic properties of TiO 2 by controllably tuning defects across {101} facets

Introducing defects into semiconductors with well-controlled exposed facets offers an effective route for the development of photocatalytic materials with greatly improved properties. Here, we report a facile ethylene glycol reduction procedure to make anatase titanium dioxide (TiO 2 ) with different concentrations of exposed {001} and {101} facets, leading to different surficial defects. TiO 2 with increased concentrations of {101} facets shows a 5-fold improvement in photocurrent generation as well as improved photocatalytic activity towards water splitting under visible light irradiation. Thus, the improved activity is ascribed to the oxygen vacancies as well as the variable surface chemical states, which collectively induce a slower recombination rate of photo-induced electron-hole pairs. This work also highlights a feasible strategy to obtain the defective TiO 2 and explore the synergistic effect of surface defects and different concentrations of exposed {001} and {101} facets for photocurrent and photocatalytic properties under visible light irradiation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In Situ Coupling Strategy for the Preparation of FeCo Alloys and Co 4 N Hybrid for Highly Efficient Oxygen Evolution

An in situ coupling approach is developed to create a new highly efficient and durable cobalt-based electrocatalyst for the oxygen evolution reaction (OER). Using a novel cyclotetramerization, a task-specific bimetallic phthalocyanine-based nanoporous organic framework is successfully built as a precursor for the carbonization synthesis of a nonprecious OER electrocatalyst. The resultant material exhibits an excellent OER activity with a low overpotential of 280 mV at a current density of 10 mA cm –2 and high durability in an alkaline medium. This impressive result ranks among the best from known Co-based OER catalysts under the same conditions. The simultaneous installation of multiple diverse cobalt-based active sites, including FeCo alloys and Co 4 N nanoparticles, plays a critical role in achieving this promising OER performance. Lastly, this innovative approach not only enables high-performance OER activity to be achieved but simultaneously provides a means to control the surface features, thereby tuning the catalytic property of the material.

36 MATERIALS SCIENCE↗

Tailoring N-Terminated Defective Edges of Porous Boron Nitride for Enhanced Aerobic Catalysis

Tailoring terminated edge of hexagonal boron nitride (h–BN) for enhancing catalysis has turned to be an imperative for the rational design of a highly active aerobic catalyst. Herein, a tailoring N–terminated porous BN (P–BN) strategy is reported with a zinc (Zn) salt as a dual–functional template. The Zn salt acts as both an in situ template and an N–terminated defective edges directing agent. The zinc salt template turns to Zn nanoparticles (Zn NPs) and functions as physical spacers, which are subsequently removed at a higher temperature, for producing P–BN, whose high surface area is high to 1579 m 2 g –1 . Moreover, because of the lower electronegativity of Zn, boron (B) atoms are partly replaced by Zn atoms and ultimately preferred to N–terminated edges with the volatilization of Zn NPs. Owing to the moderate dissociative energy of oxygen atoms on N–terminated edges, the N–terminated edges are proved to be the origin of an enhanced aerobic catalytic activity by density functional theory (DFT) calculations. Furthermore, the DFT calculation result is experimentally verified.

2D↗

PdSe 2 : Pentagonal Two-Dimensional Layers with High Air Stability for Electronics

Most studied two-dimensional (2D) materials exhibit isotropic behavior due to high lattice symmetry; however, lower-symmetry 2D materials such as phosphorene and other elemental 2D materials exhibit very interesting anisotropic properties. In this work, we report the atomic structure, electronic properties, and vibrational modes of few-layered PdSe 2 , exfoliated from bulk crystals, a pentagonal 2D layered noble transition metal dichalcogenide with a puckered morphology that is air-stable. Micro-absorption optical spectroscopy and first-principles calculations reveal a wide band gap variation in this material from ~0 (bulk) to ~1.3 eV (monolayer). The Raman active vibrational modes of PdSe 2 were identified using polarized Raman spectroscopy, and the strong interlayer interaction was revealed from the large thickness-dependent Raman peak shifts, agreeing with first-principles Raman simulations. Field-effect transistors made from the few-layer PdSe 2 display tunable ambipolar charge carrier conduction with a high electron apparent field-effect mobility of ~158 cm 2 V -1 s -1 , indicating the promise of this anisotropic, air-stable, pentagonal 2D material for 2D electronics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Incorporating Rich Mesoporosity into a Ceria-Based Catalyst via Mechanochemistry

Ceria-based materials possessing mesoporous structures afford higher activity than the corresponding bulk materials in CO oxidation and other catalytic applications, because of the wide pore channel and high surface area. The development of a direct, template-free, and scalable technology for directing porosity inside ceriabased materials is highly welcome. Here in this paper, a family of mesoporous transition-metaldoped ceria catalysts with specific surface areas up to 122 m 2 g -1 is constructed by mechanochemical grinding. No templates, additives, or solvents are needed in this process, while the mechanochemistry-mediated restructuring and the decomposing of the organic group led to plentiful mesopores. Interestingly, the copper species are evenly dispersed in the ceria matrix at the atomic scale, as observed in high resolution scanning transmission electron microscopy in high angle annular dark field. The copper-doped ceria materials show good activity in the CO oxidation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An Aerosol Mobility Imager for Rapid Size Distribution Measurement (Final Report)

Brookhaven and Aerosol Dynamics Inc. (ADI) will collaborate to couple the condensation growth cell of the Aerosol Mobility imager (AMI) constructed by ADI to the Brookhaven mobility column and detector components, and characterize its performance including counting efficiency, measurement accuracy, and speed.

99 GENERAL AND MISCELLANEOUS↗

Coordination-Supported Imidazolate Networks: Water- and Heat-Stable Mesoporous Polymers for Catalysis

The poor water stability of most porous coordination polymers (PCPs) or metal-organic frameworks (MOFs) is widely recognised as a barrier hampering their practical applications. Herein, a facile and scalable route to prepare metal-containing polymers with a good stability in boiling water (100°C, 24 h) and air (up to 390°C) is presented. The bifunctional 1-vinylimidazole (VIm) with both a coordinating site and a polymerizable organic group is introduced as the building block. This core strategy includes the synthesis of a rigid monomer with four VIm branches via a coordination process at room temperature, followed by a radical polymerization. Here we call this material Coordination-supported Imidazolate Networks (CINs). Interestingly, CINs are composed of rich mesopores from 2 to 15 nm, as characterized by low-energy (60 kV) STEM-HAADF images. Especially, the stable CINs illustrate a high turnover frequency (TOF) of 779 h -1 in the catalytic oxidation of phenol with H 2 O as the green solvent.

36 MATERIALS SCIENCE↗

Solid-state synthesis of ordered mesoporous carbon catalysts via a mechanochemical assembly through coordination cross-linking

Ordered mesoporous carbons (OMCs) have demonstrated great potential in catalysis, and as supercapacitors and adsorbents. Since the introduction of the organic–organic self-assembly approach in 2004/2005 until now, the direct synthesis of OMCs is still limited to the wet processing of phenol-formaldehyde polycondensation, which involves soluble toxic precursors, and acid or alkali catalysts, and requires multiple synthesis steps, thus restricting the widespread application of OMCs. Herein, we report a simple, general, scalable and sustainable solid-state synthesis of OMCs and nickel OMCs with uniform and tunable mesopores (~4–10 nm), large pore volumes (up to 0.96 cm 3 g –1 ) and high-surface areas exceeding 1,000m 2 g –1 , based on a mechanochemical assembly between polyphenol-metal complexes and triblock co-polymers. Nickel nanoparticles (~5.40nm) confined in the cylindrical nanochannels show great thermal stability at 600 °C. Moreover, the nickel OMCs offer exceptional activity in the hydrogenation of bulky molecules (~2 nm).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Concurrent Synthesis of High-Performance Monolayer Transition Metal Disulfides

To date, the chemical vapor deposition (CVD) approach has been widely used for the growth of transition metal dichalcogenides (TMDs). However, the reported CVD methods to synthesize TMDs cannot be used to grow more than one type of TMDs. This work reports a promising CVD technique to concurrently synthesize multiple monolayer transition metal disulfides once. The optoelectrical characterization and high-resolution transmission electron microscopy show the high quality of monolayer crystals, and, more importantly, there is no mixing between different precursors during the growth process, which has been investigated by considering the gas flow dynamics and concentration distribution of precursors in our setup. This strategy indicates the promising future for the batch production of 2D materials and the concurrent synthesis techniques in standard state-of-the-art complementary metal-oxide-semiconductor (CMOS) fabrication technology.

36 MATERIALS SCIENCE↗

Rapid Assessment of Particle Hygroscopic Growth (Final Report)

This is a Phase I feasibility study to evaluate the accuracy and the speed for measuring particle hygroscopic growth using the water-based aerosol mobility imaging system already developed between Aerosol Dynamics Inc. and Brookhaven National Laboratory (BNL). One of the key parameters determining the impact of atmospheric aerosols on global climate is aerosol hygroscopicity, or uptake of water as a function of relative humidity. To date there is no rapid means of making this measurement over the range of particle sizes and humidity values of importance. This project aims to fill this need.

54 ENVIRONMENTAL SCIENCES↗

Mesoporous MnCeO x solid solutions for low temperature and selective oxidation of hydrocarbons

The development of noble-metal-free heterogeneous catalysts that can realize the aerobic oxidation of C–H bonds at low temperature is a profound challenge in the catalysis community. Here we report the synthesis of a mesoporous Mn 0.5 Ce 0.5 O x solid solution that is highly active for the selective oxidation of hydrocarbons under mild conditions (100–120 °C). Notably, the catalytic performance achieved in the oxidation of cyclohexane to cyclohexanone/cyclohexanol (100 °C, conversion: 17.7%) is superior to those by the state-of-art commercial catalysts (140–160 °C, conversion: 3-5%). Finally, the high activity can be attributed to the formation of a Mn 0.5 Ce 0.5 O x solid solution with an ultrahigh manganese doping concentration in the CeO 2 cubic fluorite lattice, leading to maximum active surface oxygens for the activation of C–H bonds and highly reducible Mn 4+ ions for the rapid migration of oxygen vacancies from the bulk to the surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In-situ optical transmission electron microscope study of exciton phonon replicas in ZnO nanowires by cathodoluminescence

The cathodoluminescence spectrum of single zinc oxide (ZnO) nanowires is measured by in-situ optical Transmission Electron Microscope. The coupling between exciton and longitudinal optical phonon is studied. The band edge emission varies for different excitation spots. This effect is attributed to the exciton propagation along the c axis of the nanowire. Contrary to free exciton emission, the phonon replicas are well confined in ZnO nanowire. They travel along the c axis and emit at the end surface. Bending strain increases the relative intensity of second order phonon replicas when excitons travel along the c-axis.

77 NANOSCIENCE AND NANOTECHNOLOGY↗