Search NASA⌕ Search

Engineering topics

Yang, T

Publications and source records attributed to Yang, T.

SU-F-T-213: Commissioning Results of the Prototype Active Scanning Irradiation System of Korea Heavy Ion Medical Accelerator

Purpose: A prototype actives scanning beam delivery system was designed, manufactured and installed as a part of the Korea Heavy Ion Medical Accelerator Project. The prototype system includes the most components for steering, modulating, detecting incident beam to patient. The system was installed in MC-50 cyclotron beam line and tested to extract the normal operation conditions. Methods: The commissioning process was completed by using 45 MeV of proton beam. To measure the beam position accuracy along the scanning magnet power supply current, 25 different spots were scanning and measured. The scanning results on GaF film were compared with the irradiation plan. Also, the beam size variation and the intensity reduction using range shifter were measured and analyzed. The results will be used for creating a conversion factors for asymmetric behavior of scanning magnets and a dose compensation factor for longitudinal direction. Results: The results show asymmetry operations on both scanning × and y magnet. In case of scanning magnet × operation, the current to position conversion factors were measured 1.69 mm/A for positive direction and 1.74 mm/A for negative direction. The scanning magnet y operation shows 1.38mm/A and 1.48 mm/A for both directions. The size of incoming beam which was 18 mm as sigma becomes larger up to 55 mm as sigma while using 10 mm of the range shifter plate. As the beam size becomes large, the maximum intensity of the was decreased. In case of using 10 mm of range shifter, the maximum intensity was only 52% compared with no range shifter insertion. Conclusion: For the appropriate operation of the prototype active scanning system, the commissioning process were performed to measure the beam characteristics variation. The obtained results would be applied on the irradiation planning software for more precise dose delivery using the active scanning system.

43 PARTICLE ACCELERATORS↗

SU-E-T-594: Preliminary Active Scanning Results of KHIMA

Purpose: To verify the design criteria on heavy ion beam irradiation, developing a proto type active scanning system was purposed. The active scanning system consists of scanning magnet, power supplies, beam monitors, energy modulation system, and irradiation control system. Methods: Each components of the active scanning system was designed for carbon beam first. For the fast ramping a laminated yoke was purposed. To measure incoming dose and profile, a plate and strip type of ion chambers were designed. Also, ridge filter and range shifter was manufactured. And, the scanning system was modified to adopt 45 MeV of proton beam because of the absence of carbon ion beam in Korea. The system was installed in a beam line at MC-50, KIRAMS. Also, the irradiation control system and planning software was provided. Results: The scanning experiment was performed by drawing KHIMA logo on GaF film. The logo was scanned by 237 scanning points through time normalized intensity modulation. Also, a grid points scanning was performed to measure the scanning resolution and intensity resolution. Conclusion: A prototype active scanning system was successfully designed and manufactured. Also, an initial experiment to print out a drawing on GaF film through the scanning system was completed. More experiments would be required to specify the system performance.

60 APPLIED LIFE SCIENCES↗

Synthesis and Structure Determination of Ferromagnetic Semiconductors LaAMnSnO6 (A = Sr Ba)

LaAMnSnO{sub 6} (A = Sr, Ba) have been synthesized by high temperature solid-state reactions under dynamic 1% H{sub 2}/Ar flow. Rietveld refinements on room temperature powder X-ray diffraction data indicate that LaSrMnSnO{sub 6} crystallizes in the GdFeO{sub 3}-structure, with space group Pnma and, combined with transmission electron microscopy, LaBaMnSnO{sub 6} in Imma. Both space groups are common in disordered double-perovskites. The Mn{sup 3+} and Sn{sup 4+} ions whose valence states were confirmed by X-ray absorption spectroscopy, are completely disordered over the B-sites and the BO{sub 6} octahedra are slightly distorted. LaAMnSnO{sub 6} are ferromagnetic semiconductors with a T{sub C} = 83 K for the Sr- and 66 K for the Ba-compound. The title compounds, together with the previously reported LaCaMnSnO{sub 6} provide an interesting example of progression from Pnma to Imma as the tolerance factor increases. An analysis of the relationship between space group and tolerance factor for the series LaAMnMO{sub 6} (A = Ca, Sr, Ba; M = Sn, Ru) provides a better understanding of the symmetry determination for double perovskites.

36 MATERIALS SCIENCE↗

Stabilization of Ca1-dFe2-xMnxO4 (0.44 lt x lt 2) with CaFe2O4-type Structure and Ca2plus Defects in 1D Channels

Solid solutions of Ca{sub 1-{delta}}Fe{sub 2-x}Mn{sub x}O{sub 4} (0.45 {<=} x {<=} 2) were synthesized from CaCl{sub 2} as flux at 850 C in air. The entire series, even with x = 2, crystallizes in the CaFe{sub 2}O{sub 4}-type structure (Pnma), rather than in the CaMn{sub 2}O{sub 4}-type structure (Pbcm). Rietveld refinements confirmed mixed-valency Mn{sup 3+}/Mn{sup 4+} and a substantial level of Ca{sup 2+} deficiency ({delta} {approx} 0.25) at high x. With increasing x, the unit-cell dimensions a and b decrease, while that of c increases. Detailed structural analyses, together with Mn K-edge X-ray absorption and {sup 57}Fe Moessbauer spectroscopy studies, revealed that the stabilization of CaFe{sub 2}O{sub 4}-type structure, even at high values of x, is due to the existence of non-Jahn-Teller active Mn{sup 4+} (and Fe{sup 3+}), which is compensated by the formation of the Ca{sup 2+} deficiencies in the one-dimensional (1D) channels of Ca{sub 1-{delta}}Fe{sub 2-x}Mn{sub x}O{sub 4} during the flux synthesis. Antiferromagnetic (AFM) long-range ordering is achieved for all compounds at low temperature, because of strong AFM interactions between Mn{sup 3+}/Mn{sup 4+} and Fe{sup 3+}. In addition, a spin (or cluster) glass component was also observed, as expected, because of the extensive Mn/Fe structural and Mn{sup 3+}/Mn{sup 4+} charge disordering.

36 MATERIALS SCIENCE↗

B-site Ordered Perovskite LaSrMnNbO6: Synthesis Structure and Antiferromagnetism

LaSrMnNbO{sub 6} has been synthesized by high temperature solid state reaction under 1% H{sub 2}/Ar dynamic flow. The structure is determined by Rietveld refinement of the powder X-ray diffraction data. It crystallizes in the monoclinic space group P2{sub 1}/n with the unit cell parameters: a = 5.69187(12), b = 5.74732(10), c = 8.07018(15) {angstrom} and {beta} = 90.0504(29){sup o}, which were also confirmed by electron diffraction. The Mn{sup 2+} and Nb{sup 5+} ions, whose valence states are confirmed by X-ray absorption near-edge spectroscopy, are almost completely ordered over the B-site (<1% inversion) of the perovskite structure due to the large differences of both cationic size (0.19 {angstrom}) and charge. The octahedral framework displays significant tilting distortion according to Glazer's tilt system a{sup -}b{sup -}c{sup +}. Upon heating, LaSrMnNbO{sub 6} decomposes at 690 C under O{sup 2} flow or at 775 C in air. The magnetic susceptibility data indicate the presence of long-range antiferromagnetic ordering at T{sub N} = 8 K; the experimentally observed effective paramagnetic moment, {mu}{sub eff} = 5.76 {micro}{sub B} for high spin Mn{sup 2+} (3d{sup 5}, S = 5/2) is in good agreement with the calculated value ({mu}{sub calcd} = 5.92 {micro}B).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

BiMnFe(2)O(6) a Polysynthetically Twinned hcp MO Structure

The most efficient use of spatial volume and the lowest potential energies in the metal oxide structures are based on cubic close packing (ccp) or hexagonal close packing (hcp) of anions with cations occupying the interstices. A promising way to tune the composition of close packed oxides and design new compounds is related to fragmenting the parent structure into modules by periodically spaced planar interfaces, such as twin planes at the unit cell scale. The unique crystal chemistry properties of cations with a lone electron pair, such as Bi{sup 3+} or Pb{sup 2+}, when located at interfaces, enables them to act as 'chemical scissors', to help relieve configurational strain. With this approach, we synthesized a new oxide, BiMnFe{sub 2}O{sub 6}, where fragments of the hypothetical hcp oxygen-based MO structure (the NiAs structure type), for the first time, serve as the building modules in a complex transition metal oxide. Mn{sup 3+} and Fe{sup 3+} ions are randomly distributed in two crystallographically independent sites (M1 and M2). The structure consists of quasi two-dimensional blocks of the 2H hexagonal close packed MO structure cut along the (114) crystal plane of the hcp lattice and stacked along the c axis. The blocks are related by a mirror operation that allows BiMnFe{sub 2}O{sub 6} to be considered as a polysynthetically twinned 2H hcp MO structure. The transition to an AFM state with an incommensurate spin configuration at {approx}212 K is established by {sup 57}Fe Moessbauer spectroscopy, magnetic susceptibility, specific heat and low temperature powder neutron diffraction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

BiMnFe2O6 a Polysynthetically Twinned hcp MO Structure

The most efficient use of spatial volume and the lowest potential energies in the metal oxide structures are based on cubic close packing (ccp) or hexagonal close packing (hcp) of anions with cations occupying the interstices. A promising way to tune the composition of close packed oxides and design new compounds is related to fragmenting the parent structure into modules by periodically spaced planar interfaces, such as twin planes at the unit cell scale. The unique crystal chemistry properties of cations with a lone electron pair, such as Bi{sup 3+} or Pb{sup 2+}, when located at interfaces, enables them to act as 'chemical scissors', to help relieve configurational strain. With this approach, we synthesized a new oxide, BiMnFe{sub 2}O{sub 6}, where fragments of the hypothetical hcp oxygen-based MO structure (the NiAs structure type), for the first time, serve as the building modules in a complex transition metal oxide. Mn{sup 3+} and Fe{sup 3+} ions are randomly distributed in two crystallographically independent sites (M1 and M2). The structure consists of quasi two-dimensional blocks of the 2H hexagonal close packed MO structure cut along the (114) crystal plane of the hcp lattice and stacked along the c axis. The blocks are related by a mirror operation that allows BiMnFe{sub 2}O{sub 6} to be considered as a polysynthetically twinned 2H hcp MO structure. The transition to an AFM state with an incommensurate spin configuration at {approx}212 K is established by {sup 57}Fe Moessbauer spectroscopy, magnetic susceptibility, specific heat and low temperature powder neutron diffraction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characterization of the ground X{sub 1} state of {sup 204}Pb{sup 19}F, {sup 206}Pb{sup 19}F, {sup 207}Pb{sup 19}F, and {sup 208}Pb{sup 19}F

Pure rotational spectra of the ground electronic-vibrational X{sub 1} state of {sup 204}Pb{sup 19}F, {sup 206}Pb{sup 19}F, {sup 207}Pb{sup 19}F, and {sup 208}Pb{sup 19}F are measured with a resonator pulsed supersonic jet Fourier-transform microwave spectrometer. Also reported is a new measurement of the Stark effect on the optical spectra of A(leftarrow)X{sub 1} transitions. These spectra are combined with published high-resolution infrared spectra of X{sub 2}{r_reversible}X{sub 1} transitions in order to create a complete picture of the ground state of lead monofluoride. For the microwave data, molecules are prepared by laser ablation of lead target rods and stabilized in a supersonic jet of neon mixed with sulfur hexafluoride. For the optical Stark spectra, a continuous source of molecules is created in a nozzle heated to 1000 deg. C. The microwave spectra confirm, improve, and extend previously reported constants that describe the rotational, spin-orbit, and hyperfine interactions of the ground electronic state of the PbF molecule. A discrepancy concerning the sign of the hyperfine constant describing the {sup 207}Pb nucleus is discussed. Magnetic-field-dependent microwave spectra are used to characterize the Zeeman interaction in terms of two g factors of the body-fixed electronic wave function. The optical Stark spectra are used to characterize the electric dipole moment of the X{sub 1} and A states.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Structural and electrical characteristics of high quality (100) orientated-Zn{sub 3}N{sub 2} thin films grown by radio-frequency magnetron sputtering

We report on highly crystalline zinc nitride (Zn{sub 3}N{sub 2}) thin films which were grown by rf magnetron sputtering on quartz substrates. The substrate temperature during growth is found to strongly affect the crystal quality of the thin films. The chemical bonding states were determined by x-ray photoelectron spectroscopy. Large chemical shifts in core-level N 1s peaks with binding energy of 396.4 eV were observed as compared to N 1s of free amine (398.8 eV), indicating Zn-N bond formation. Two N 1s states were found: one is N{sub 1} formed by Zn-N bonds and another is (N{sub 2}) produced by substitution of N molecules at N ion sites, which leads to larger lattice constants, consistent with x-ray diffraction results. Temperature-dependent Hall effect measurements of our Zn{sub 3}N{sub 2} films exhibited distinct conduction mechanisms at specific different temperature ranges.

36 MATERIALS SCIENCE↗

Electrical properties and stability of p-type ZnO film enhanced by alloying with S and heavy doping of Cu

Single wurtzite p-type Zn{sub 1-y}Cu{sub y}O{sub 1-x}S{sub x} alloy films with 0.081{<=}x{<=}0.186 and 0.09{<=}y{<=}0.159 were grown on quartz reproducibly by magnetron sputtering. The alloys show very stable p-type conductivity with a hole concentration of 4.31-5.78x10{sup 19} cm{sup -3}, a resistivity of 0.29-0.34 {Omega} cm and a mobility of 0.32-0.49 cm{sup 2} V{sup -1} s{sup -1}. The p-type conductivity is attributed to substitution of Cu{sup +1} for the Zn site, and the ionization energy of the Cu{sup +1} acceptor is measured to be 53 meV, much less than that of Cu-doped ZnO reported previously. The small ionization energy is due to Cu heavy doping and increase in valence band maximum of ZnO induced by alloying with S.

36 MATERIALS SCIENCE↗

Ca{sub 4}Fe{sub 3-x}Mn{sub x}O{sub 8-{delta}C}l{sub 2}: A new n=3 Ruddlesden-Popper oxychloride

Solid state solutions of Ca{sub 4}Fe{sub 3-x}Mn{sub x}O{sub 8-{delta}C}l{sub 2} (0.92{<=}x{<=}1.79 ({delta}{approx}0.1) single crystals were synthesized in CaCl{sub 2}-flux in air. The structure, determined by single-crystal X-ray diffraction, is related to the n=3 Ruddlesden-Popper phase in space group I4/mmm with strong deviations from the ideal structure. Mn and Fe are disordered over two transition metal sites. Due to the positional disordering of the equatorial oxygen atoms in the MO{sub 6} octahedra in Ca{sub 4}Fe{sub 3-x}Mn{sub x}O{sub 8-{delta}C}l{sub 2} both tilting ({approx}9{sup o}) along the c-axis and rotation ({approx}10.5{sup o}) within the ab-plane are observed. All the Fe ions are trivalent, as confirmed by {sup 57}Fe Moessbauer spectroscopy and X-ray absorption near edge spectroscopy (XAS), while the formal valence state of Mn varies from very close to 4+ in the x=0.92 to mix-valent 3+/4+ in the x=1.79 member, as indicated by XAS. Magnetic investigations evidence short-range antiferromagnetic ordering already at room temperature and spin-glass behavior at low temperature due to the structural disordering of Mn/Fe. - Graphical abstract: Structural analysis by the X-ray diffraction, the {sup 57}Fe Moessbauer and the X-ray absorption spectroscopy shows that all Fe ions are trivalent, the valence of Mn varies from {approx}4+ to 3+/4+ with increasing x.

36 MATERIALS SCIENCE↗

Ca4Fe3 xMnxO8 Cl2: A New n=3 Ruddlesden–Popper Oxychloride

Solid state solutions of Ca{sub 4}Fe{sub 3-x}Mn{sub x}O{sub 8-{delta}}Cl{sub 2} (0.92 {le} x {le} 1.79 {delta} {approx} 0.1) single crystals were synthesized in CaCl{sub 2}-flux in air. The structure, determined by single-crystal X-ray diffraction, is related to the n=3 Ruddlesden-Popper phase in space group I4/mmm with strong deviations from the ideal structure. Mn and Fe are disordered over two transition metal sites. Due to the positional disordering of the equatorial oxygen atoms in the MO{sub 6} octahedra in Ca{sub 4}Fe{sub 3-x}Mn{sub x}O{sub 8-{delta}}Cl{sub 2} both tilting (9{sup o}) along the c-axis and rotation (10.5{sup o}) within the ab-plane are observed. All the Fe ions are trivalent, as confirmed by {sup 57}Fe Moessbauer spectroscopy and X-ray absorption near edge spectroscopy (XAS), while the formal valence state of Mn varies from very close to 4+ in the x = 0.92 to mix-valent 3+/4+ in the x = 1.79 member, as indicated by XAS. Magnetic investigations evidence short-range antiferromagnetic ordering already at room temperature and spin-glass behavior at low temperature due to the structural disordering of Mn/Fe.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Study of CO2 laser smoothing of surface roughness in fused silica

Small micrometer-sized roughness on optical surfaces, caused by laser damage and/or redeposition of laser ablated material, can cause local electric field intensification which may lead to damage initiation both on the optics and/or downstream. We examined the smoothing of etched periodic surface structures on SiO{sub 2} substrate with 10.6 {micro}m CO{sub 2} laser using atomic force microscopy. The characteristic surface tension driven mass flow of the glass under different laser parameters were simulated using computational fluid dynamics and correlated with experimental results. We found that during CO{sub 2} laser polishing the estimate viscosity of the silica glass appears to be higher than typical literature values measured at a temperature similar to the laser heating conditions. This discrepancy can be explained by the observation that at high temperature, a significant portion of the hydroxyl content in the layer of heated silica glass can diffuse out resulting in a much stiffer glass.

42 ENGINEERING↗

A Hadronization Model for the MINOS Experiment

We present a detailed description of the Andreopoulos-Gallagher-Kehayias-Yang (AGKY) hadronic multiparticle production model. This model was developed within the context of the MINOS experiment. Its validity spans a wide invariant mass range starting from as low as the pion production threshold. It exhibits satisfactory agreement with a wide variety of experimental data.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗