Search NASA⌕ Search

Engineering topics

Yang, W M

Publications and source records attributed to Yang, W M.

SOLAR MODELS WITH REVISED ABUNDANCE

We present new solar models in which we use the latest low abundances and further include the effects of rotation, magnetic fields, and extra-mixing processes. We assume that the extra-element mixing can be treated as a diffusion process, with the diffusion coefficient depending mainly on the solar internal configuration of rotation and magnetic fields. We find that such models can well reproduce the observed solar rotation profile in the radiative region. Furthermore, the proposed models can match the seismic constraints better than the standard solar models, also when these include the latest abundances, but neglect the effects of rotation and magnetic fields.

79 ASTRONOMY AND ASTROPHYSICS↗

Characterization of wall temperature and radiation power through cylindrical dump micro-combustors

The micro-combustor (emitter) is a key component of the micro-thermophotovoltaic (TPV) system. An experimental study on the wall temperature and radiation power through the wall of a series of cylindrical dump micro-combustors was carried out. The effects of combustor diameter (d), combustor length (L), step height (s), flow velocity (u{sub 0}) and fuel-air equivalence ratio ({phi}) on the wall temperature distribution were investigated. 'Emitter efficiency' was defined and quantified based on the measured wall temperature. It was demonstrated that for this particular configuration, that is, a cylindrical micro-combustor with a backward-facing step, the two dimensionless ratios -L/d and s/d, are sufficient to determine the emitter efficiency, provided the flow velocity (U{sub e}) and {phi} are known. Based on this result, the effects of the dimensionless step height (s/d) on the emitter efficiency were examined. It was shown that such a sudden flow expansion in the dump combustors does not favor the radiation through the outer wall. Finally, the position of the highest wall temperature and its variation with the flow Reynolds number were discussed. It was noted that the Reynolds number and the relative flow expansion (s/d) alone are inadequate to determine the relative position of the highest wall temperature. (author)

30 DIRECT ENERGY CONVERSION↗

Study on premixed combustion in cylindrical micro combustors: Transient flame behavior and wall heat flux

The micro combustor is a key component of the micro thermophotovoltaic (TPV) system. Improving the wall temperature of the micro combustor is an effective way to elevate the system efficiency. An experimental study on the wall temperature and radiation heat flux of a series of cylindrical micro combustors (with a backward-facing step) was carried out. For the micro combustors with d = 2 mm, the regime of successful ignition (under the cold wall condition) was identified for different combustor lengths. Acoustic emission was detected for some cases and the emitted sound was recorded and analyzed. Under the steady-state condition, the effects of the combustor diameter (d), combustor length (L), flow velocity (u{sub 0}) and fuel-air equivalence ratio ({phi}) on the wall temperature distribution were investigated by measuring the detailed wall temperature profiles. In the case that the micro combustor is working as an emitter, the optimum efficiency was found at {phi} {approx} 0.8, independent of the combustor dimensions (d and L) and the flow velocity. Under the experimental conditions employed in the present study, the positions of the peak wall temperature were found to be about 8-11 mm and 4-6 mm from the step for the d = 3 mm and d = 2 mm micro combustors, respectively, which are 8-11 and 8-12 times of their respective step heights. This result suggests that the backward-facing step employed in the combustor design is effective in stabilizing the flame position. (author)

30 DIRECT ENERGY CONVERSION↗