Search NASA⌕ Search

Engineering topics

Yang, Wenge

Publications and source records attributed to Yang, Wenge.

At least 55 records · Page 3

Pressure-Induced Multidimensional Assembly and Sintering of CuInS 2 Nanoparticles into Lamellar Nanosheets with Band Gap Narrowing

Two-dimensional (2D) nanomaterials have fascinating structural, electrical, and optical properties, especially strong excitonic effects due to decreased dielectric screening. However, constructing 2D ultrathin nanomaterials, with the exception of layered materials, remains a challenge. In this work, we successfully realize oriented attachment on guiding one-dimensional chalcopyrite CuInS 2 nanocrystal (NC) formation and 2D assembly into lamellar nanosheets by applying pressure-driven sintering of zero-dimensional CuInS2 nanoparticles (NPs). We discuss the atomic-level mechanism of such phenomena and illustrate a pressure-driven processing diagram that reveals the sintering process of NPs coordinated by pressure and structural transformation. Optical measurements exhibit that the band gap has a narrowing by 0.21 eV compared with the initial 2.03 eV upon decompression to ambient conditions. Our findings represent a significant step forward in gaining an in-depth understanding of the pressure-driven morphology engineering of nanomaterials and provide a promising strategy to prepare 2D NCs, thereby greatly increasing the choice of materials for various applications.

36 MATERIALS SCIENCE↗

Tuning to more compressible phase in TiZrHfNb high entropy alloy by pressure

In this work, the starting nominal Ti 25 Zr 25 Hf 25 Nb 25 high entropy alloy (HEA) has two body centered cubic (BCC) phases with a volume percentage about 100:1, with the primary phase having a much larger bulk modulus (incompressible) than the uniform single-phase HEA. We found that these two phases merged into one single BCC phase at pressures beyond 36 GPa, whose bulk modulus dropped to that of the normal homogeneous HEA. After decompressing, the new phase can be sustained to ambient conditions. We note this abnormal pressure-induced softening was largely related to the lattice distortion evolution and interfacial energy during compression.

36 MATERIALS SCIENCE↗

Ultrahigh-pressure isostructural electronic transitions in hydrogen

High-pressure transitions are thought to modify hydrogen molecules to a molecular metallic solid and finally to an atomic metal, which is predicted to have exotic physical properties and the topology of a two-component (electron and proton) superconducting superfluid condensate. Therefore, understanding such transitions remains an important objective in condensed matter physics. However, measurements of the crystal structure of solid hydrogen, which provides crucial information about the metallization of hydrogen under compression, are lacking for most high-pressure phases, owing to the considerable technical challenges involved in X-ray and neutron diffraction measurements under extreme conditions. Here we present a single-crystal X-ray diffraction study of solid hydrogen at pressures of up to 254 gigapascals that reveals the crystallographic nature of the transitions from phase I to phases III and IV. Under compression, hydrogen molecules remain in the hexagonal close packed (hcp) crystal lattice structure, accompanied by a monotonic increase in anisotropy. In addition, the pressure-dependent decrease of the unit cell volume exhibits a slope change when entering phase IV, suggesting a second-order isostructural phase transition. Furthermore, our results indicate that the precursor to the exotic two-component atomic hydrogen may consist of electronic transitions caused by a highly distorted hcp Brillouin zone and molecular-symmetry breaking.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural and electronic phase transitions of Co 2 Te 3 O 8 spiroffite under high pressure

The structural and electronic phase transitions of Co 2 Te 3 O 8 spiroffite have been studied with a suite of in situ high-pressure characterization techniques including synchrotron x-ray diffraction, Raman, x-ray emission spectroscopy, UV-vis absorption, and electrical transport measurement. Two pressure-induced phase transitions were observed at about 6.9 and 14.4 GPa. The first transition is attributed to a small spin transition of Co along with discontinuity in unit-cell volume change, while the second one represents a first-order phase transition with a volume collapse of 4.5%. The latter transition is accompanied by the relaxation of distortion in CoO 6 octahedron, which enhances the crystal-field strength inhibiting the occurrence of spin transition. What is more, the competition between contributions of electrons and oxygen ion to the overall conductivity is observed and affected by the phase transition under high pressure. Finally, this demonstration provides insights into the relationship between the lattice-structural and spin degrees of freedom, and highlights the impact of pressure on the control of structural and electronic states of a given material for optimized functionalities.

36 MATERIALS SCIENCE↗

Pressure-enhanced interplay between lattice, spin, and charge in the mixed perovskite La 2 FeMnO 6

Spin crossover plays a central role in the structural instability, net magnetic moment modification, metallization, and even in superconductivity in corresponding materials. Most reports on the pressure-induced spin crossover with a large volume collapse have so far focused on compounds with a single transition metal. Here we report a comprehensive high-pressure investigation of a mixed Fe-Mn perovskite La 2 FeMnO 6 . Under pressure, the strong coupling between Fe and Mn leads to a combined valence/spin transition: Fe 3+ (S=5/2) → Fe 2 + (S = 0) and Mn 3+ (S = 2) → Mn 4+ (S = 3/2), with an isostructural phase transition. The spin transitions of both Fe and Mn are offset by ~20 GPa of the onset pressure, and the lattice collapse occurs in between. Interestingly, Fe 3+ ion shows an abnormal behavior when it reaches a lower valence state (Fe 2+ ) accompanied by a +0.5 eV energy shift in the Fe K -absorption edge at 15 GPa. This process is associated with the charge-spin-orbital state transition from high spin Fe 3+ to low spin Fe 2+ , caused by the significantly enhanced t 2 g -e g crystal field splitting in the compressed lattice under high pressure. Density functional theory calculations confirm the energy preference of the high-pressure state with charge redistribution accompanied by spin state transition of Fe ions. Moreover, La 2 FeMnO 6 maintains semiconductor behaviors even when the pressure reached 144.5 GPa as evidenced by the electrical transport measurements, despite the huge resistivity decreasing seven orders of magnitude compared with that at ambient pressure. The investigation carried out here demonstrates high flexibility of double perovskites and their good potentials for optimizing the functionality of these materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Chemistry Design Towards a Stable Sulfide‐Based Superionic Conductor Li 4 Cu 8 Ge 3 S 12

Abstract Sulfide‐based superionic conductors with high ionic conductivity have been explored as candidates for solid‐state Li batteries. However, moisture hypersensitivity has made their manufacture complicated and costly and also impeded applications in batteries. Now, a sulfide‐based superionic conductor Li 4 Cu 8 Ge 3 S 12 with superior stability was developed based on the hard/soft acid–base theory. The compound is stable in both moist air and aqueous LiOH aqueous solution. The electrochemical stability window was up to 1.5 V. An ionic conductivity of 0.9×10 −4 S cm with low activation energy of 0.33 eV was achieved without any optimization. The material features a rigid Cu‐Ge‐S open framework that increases its stability. Meanwhile, the weak bonding between Li + and the framework promotes ionic conductivity. This work provides a structural configuration in which weak Li bonding in the rigid framework promotes an environment for highly conductive and stable solid‐state electrolytes.

Wang, Yingqi↗

Temperature-induced amorphization in CaCO 3 at high pressure and implications for recycled CaCO 3 in subduction zones

Calcium carbonate (CaCO 3 ) significantly affects the properties of upper mantle and plays a key role in deep carbon recycling. However, its phase relations above 3 GPa and 1000 K are controversial. Here we report a reversible temperature-induced aragonite-amorphization transition in CaCO 3 at 3.9-7.5 GPa and temperature above 1000 K. Amorphous CaCO 3 shares a similar structure as liquid CaCO 3 but with much larger C-O and Ca-Ca bond lengths, indicating a lower density and a mechanism of lattice collapse for the temperature-induced amorphous phase. The less dense amorphous phase compared with the liquid provides an explanation for the observed CaCO 3 melting curve overturn at about 6 GPa. Amorphous CaCO 3 is stable at subduction zone conditions and could aid the recycling of carbon to the surface.

58 GEOSCIENCES↗

Chemistry Design Towards a Stable Sulfide-Based Superionic Conductor Li 4 Cu 8 Ge 3 S 12

Sulfide-based superionic conductors with high ionic conductivity have been explored as candidates for solid-state Li batteries. However, moisture hypersensitivity has made their manufacture complicated and costly and also impeded applications in batteries. Now, a sulfide-based superionic conductor Li 4 Cu 8 Ge 3 S 12 with superior stability was developed based on the hard/soft acid–base theory. The compound is stable in both moist air and aqueous LiOH aqueous solution. The electrochemical stability window was up to 1.5 V. An ionic conductivity of 0.9×10 -4 S cm with low activation energy of 0.33 eV was achieved without any optimization. The material features a rigid Cu-Ge-S open framework that increases its stability. Meanwhile, the weak bonding between Li + and the framework promotes ionic conductivity. This work provides a structural configuration in which weak Li bonding in the rigid framework promotes an environment for highly conductive and stable solid-state electrolytes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Diffusion-controlled alloying of single-phase multi-principal transition metal carbides with high toughness and low thermal diffusivity

Multicomponent alloying has displayed extraordinary potential for producing exceptional structural and functional materials. Consequently, the synthesis of single-phase, multi-principal covalent compounds remains a challenge. Here, we present a diffusion-controlled alloying strategy for the realization of covalent multi-principal transition metal carbides (MPTMCs) with a single face-centered cubic phase. The increased interfacial diffusion promoted by the addition of a nonstoichiometric compound leads to rapid formation of the single phase at much lower sintering temperature. Direct atomic-level observations via scanning transmission electron microscopy demonstrate that MPTMCs are composed of a single phase with a random distribution of all cations, which holds the key to the unique combinations of improved fracture toughness, superior Vickers hardness, and extremely lower thermal diffusivity achieved in MPTMCs. Conclusively, the present discovery provides a promising approach toward the design and synthesis of next-generation high-performance materials.

36 MATERIALS SCIENCE↗

Pressure-induced charge density wave phase in A g 2 - δ Te

Considerable excitement was generated by the observation of large and linear positive magnetoresistance in nonmagnetic silver chalcogenides. Renewed interest in these materials was kindled by the discovery that Ag 2 Te in particular is a topological insulator with gapless linear Dirac-type surface states. High-pressure x-ray-diffraction studies, combined with first-principles electronic structure calculations, have identified three phase transitions as the pressure is increased: an isostructural transition identified with an electronic topological transition followed by two structural phase transitions. These recent studies were carried out on nominally stoichiometric Ag 2 Te. For the present work we have prepared single-phase self-doped Ag 2-δ Te samples with a well-characterized silver deficit (δ=2.0×10 -4 ) for structural and electrical transport measurements over extended ranges of pressure (0–43 GPa), temperature (2–300 K), and magnetic field (0–9 T). The temperature dependence of the resistivity exhibits anomalous behavior at 2.3 GPa, slightly above the isostructural transition, which we postulate is due to Fermi surface reconstruction associated with a charge density wave (CDW) phase. The anomaly is enhanced by the application of a 9-T magnetic field and shifted to higher temperature, implying that the electronic Zeeman energy is sufficient to alter the gapping of the Fermi surface. A peak in the pressure dependence of the resistivity and a sudden drop in the pressure dependence of the mobility, occurring at 2.3 GPa, provide additional evidence for a CDW phase at pressures slightly above the isostructural transition.

36 MATERIALS SCIENCE↗