Engineering topics

Yang, Zhenzhen

Publications and source records attributed to Yang, Zhenzhen.

At least 181 records · Page 10

DOE OSTI2021

Extended cycle life implications of fast charging for lithium-ion battery cathode

Enabling extreme fast charging (XFC, =10–15 min charging) requires a comprehensive understanding of its implications. While lithium plating is a key bottleneck for the anode, the full extent of limitations for the cathode are not well-understood, particularly in extended-cycle settings with well-defined battery designs and conditions. This article presents cycle-life implications of XFC on cathodes at multiple length scales, combining electrochemical analyses, degradation modeling, and post-test characterizations. The comprehensive test matrix includes 41 well-defined gr/NMC pouch cells under varied fast-charge rates (1–9C) and state-of-charges cycled up to 1000 times. Cathode issues remain minimal in early cycling, but begin to accelerate in later life, when distinct cracking is found and identified as a fatigue mechanism. The bulk structure of cathodes remains intact, but distinct particle surface reconstruction is observed; however, this shows less pronounced effect on cathode aging than does cracking.

25 ENERGY STORAGE↗

DOE OSTI2021

Self-Stabilized LiNi 0.8 Mn 0.1 Co 0.1 O 2 in thiophosphate-based all-solid-state batteries through extra LiOH

Nickle-rich LiNi 0.8 Co 0.1 Mn 0.1 O 2 (NMC 811) cathode material exhibits engaging properties in high energy density and low cost, making it great potential for the next generation high-energy all-solid-state lithium batteries (ASSLBs). However, NMC 811 suffers from severe surface electrochemical, chemical, and voltage incompatibility towards solid-state electrolytes (SSE), especially thiophosphate-based electrolytes like Li 6 PS 5 Cl. Although diverse coating methods have been made to overcome this issue, they are typically cumbersome and expensive. A coating strategy that satisfied all the requirements of cost-efficiency, stability, uniformity, scalability, and easy-achieving is still challenging. Here, we developed a LiOH-based surface stabilization strategy that provides a ~10 nm stable permeable layer on NMC 811. After one-step sintering of NMC 811 precursor mixed with LiOH, which is commonly used for NMC 811 lithiation process, excessive LiOH simultaneously distributes on NMC 811 particles. Unlike other reported methods, this coating method can be easily controlled and fabricated without additional complicated processes. By simply controlling the thickness of LiOH layer, which protects the Li 6 PS 5 Cl solid electrolyte materials from being oxidized, optimized cycling stability can be obtained for 600 cycles with capacity of 130 mAh g – 1 on average at a wide electrochemical window of 2.50–4.20 V (vs. Li-In).

25 ENERGY STORAGE↗

DOE OSTI2021

Investigating Ternary Li–Mg–Si Zintl Phase Formation and Evolution for Si Anodes in Li-Ion Batteries with Mg(TFSI) 2 Electrolyte Additive

Improved electrochemical performance of Si was recently reported by adding multivalent cation salts (such as Mg 2+ , Al 3+ , Ca 2+, etc.) in the electrolyte. This is achieved via the formation in an in situ manner of relatively more stable Li-M-Si ternary phases with less chemical reactivity. These phases stabilize Si anions and thus reduce side reactions with electrolytes at the surface and eventually benefit the overall electrochemistry. To understand the mechanism of ternary Zintl phase formation and its dynamics upon lithiation/delithiation, high-resolution solid-state 7 Li and 29 Si nuclear magnetic resonance (NMR) are utilized to directly probe the local Li and Si environments on Si electrodes harvested from coin and pouch cells at various states of (de)lithiation. The NMR spectra along with the electrochemical characterization reveal that lithiation of Si starts from the surface Si-O layer further confirmed by 7 Li– 29 Si cross-polarization NMR. Lithiation progresses with heterogeneous silicon clustering with Si -4 anions at high states of lithiation. At a fully lithiated state, the formation of overlithiated Si species is detected. At a low-voltage region (below 100 mV), direct evidence for Mg-ion insertion is found, postulated by two possible mechanisms: ion exchange with fully or overlithiated binary domains (Li 3.75+x Si) and/or a coinsertion with slightly underlithiated domains (similar to Li 3.55 Si). Upon delithiation, Li extraction starts from overlithiated Si domains. No evidence is found for electrochemical Mg removal. Evidence for a lithium-deficient Li y Mg 0.1 Si phase is found as a result of Li removal during charging. This investigation sheds light on the possible mechanisms of a new Si anode chemistry, which could enable the development of stable Si-based anodes for lithium-ion batteries.

25 ENERGY STORAGE↗

DOE OSTI2021

Photoinduced Strong Metal–Support Interaction for Enhanced Catalysis

Strong metal–support interaction (SMSI) construction is a pivotal strategy to afford thermally robust nanocatalysts in industrial catalysis, but thermally induced reactions (>300 °C) in specific gaseous atmospheres are generally required in traditional procedures. In this work, a photochemistry-driven methodology was demonstrated for SMSI construction under ambient conditions. Encapsulation of Pd nanoparticles with a TiO x overlayer, the presence of Ti 3+ species, and suppression of CO adsorption were achieved upon UV irradiation. The key lies in the generation of separated photoinduced reductive electrons (e – ) and oxidative holes (h + ), which subsequently trigger the formation of Ti 3+ species/oxygen vacancies (Ov) and then interfacial Pd–Ov–Ti 3+ sites, affording a Pd/TiO 2 SMSI with enhanced catalytic hydrogenation efficiency. The as-constructed SMSI layer was reversible, and the photodriven procedure could be extended to Pd/ZnO and Pt/TiO 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

A universal etching method for synthesizing high-performance single crystal cathode materials

LiNi x MnyCo 1-x-y O 2 (NMC) is considered the most appealing cathode material due to its high energy density and low cost. However, the stability and safety concerns, caused by the degradation of polycrystalline cathode materials during cycling, have restricted their practical applications. To overcome this shortcoming, converting polycrystalline cathode to high-performance single-crystal cathode materials becomes an appealing solution. In this work, a universal etching approach is firstly developed to synthesize single-crystal cathode materials. The rate performance of the obtained single-crystal NMC111 is 10–15% more than that of polycrystalline NMC111 whereas the capacity retention of single-crystal NMC111 is enhanced by ~12% after 300 cycles at 0.5C. The obtained single-crystal NMC622 exhibits a pronounced improvement in rate performance, especially at high rates (~28.6% better at 5C and ~129% better at 10C) and has a comparable cycle performance compared to polycrystalline NMC622. Altogether, the findings propose an alternative approach to generate single-crystal particles with high energy density and cycle stability for the next generation lithium-ion batteries.

25 ENERGY STORAGE↗

DOE OSTI2021

Stabilized Lithium, Manganese-Rich Layered Cathode Materials Enabled by Integrating Co-Doping and Nanocoating

While lithium, manganese-rich (LMR) layered oxide cathode materials offer high energy density (>900 Wh kg –1 ) and low cost, LMR is susceptible to continuous capacity and voltage decay from the oxygen migration and side reaction with aqueous electrolyte at high voltage. Herein, the integration of Na/F co-doping (CD) and AlF 3 coating on LMR is achieved without the need of complex atomic layer deposition. Akin to pristine and CD samples, CD with 1 wt % AlF 3 (CD-1.0 wt %) shows excellent electrochemical performance with the capacity and voltage retentions of 93 and 91% after 150 cycles at 0.5C, respectively, and increased ionic conductivity. Spectroscopic analysis indicates that the coating mainly influences the Co distribution, where Co is enriched on the surface, and partial diffusion of Al 3+ ions toward the bulk, leading to a slight change of transition-metal (TM) valence states at the nanometer scale and the formation of a stable Li x (CoAl)O y phase. Post-cycling analysis reveals that CD-1.0 wt % can alleviate the formation of rock-salt structure and Mn dissolution. Besides, little to no metal segregation is detected for the cycled CD-1.0 wt % sample. This finding presents the first instance to apply co-doping and AlF 3 coating as a new strategy to enhance the structural homogeneity and takes another step toward their commercial viability.

25 ENERGY STORAGE↗

DOE OSTI2021

Fabrication of Ionic Covalent Triazine Framework-Linked Membranes via a Facile Sol–Gel Approach

Covalent triazine framework (CTF)-based membranes have shown unique properties and wide applications in energy-related fields, but there is still no efficient strategy capable of affording CTF membranes functionalized with ionic moieties, which will bring extra merits and application possibilities. In this work, a robust CTF membrane with ionic functionalities was fabricated via a sol–gel approach promoted by a superacid (FSO 3 H). The CTF skeleton was constructed via the trimerization of cyano groups in the monomer, and piperazine moieties were introduced as reactive sites for the formation of ammonium cations coupled with FSO 3 – anions within the backbone. The obtained transparent and red protonated polymeric CTF-based membrane (PP-CTF) exhibited significant absorption at 646 nm in the solid-state ultraviolet–visible diffuse reflectance spectrum. Comparatively, the neutralized deprotonated counterparts turned to yellow color with a significant blueshift absorption to 492 nm. The theoretical calculation demonstrated that PP-CTF and deprotonated polymeric CTF membrane (DP-CTF) were stable with AB-stacking mode, and PP-CTF had a smaller band gap (0.90 eV) than that of DP-CTF (2.17 eV). The significant optical absorption and emission behavior change of PP-CTF and its robust chemical stability endowed it with the capability to act as pH indicators. The synthetic pathway developed in this work and the performance of the resultant ionic membrane opens new opportunities in the aspects of membrane design, fabrication, and application.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Unveiling the Influence of Carbon Impurity on Recovered NCM622 Cathode Material

With the proliferation of market demand for lithium-ion batteries (LIBs) over the past decades, battery recycling has aroused extensive attention due to the environmental, supply, and economic issues caused by waste batteries. Here, the hydrometallurgical recycling method has been widely adopted to recover cathode materials as a result of its wide applicability and high productivity. However, it is hard to completely eliminate impurities such as copper, aluminum, and carbon, which could bring significant impacts on recovered materials. Here, the influence of the carbon impurity on recovered LiNi 0.6 Co 0.2 Mn 0.2 O 2 (NCM622) cathode material is systematically investigated. It shows that the carbon impurity promotes nucleation during coprecipitation and forms holes in the cathode secondary particles after sintering which could enhance cyclability of the NCM622 cathode. The cathode with 0.2 atom % of carbon impurity displays the highest capacity of 159.9 mAh/g with a striking capacity retention rate of 97.9% after 100 cycles at 0.33C, but performs worse at high rates. Nonetheless, excess carbon (5 atom %) results in severe cation disorder and lattice distortion which significantly deteriorates the electrochemical properties of the NCM622 cathode. Therefore, it is important to strictly control carbon impurity during the recycling process for spent LIBs.

25 ENERGY STORAGE↗

DOE OSTI2021

Benzene Ring Knitting Achieved by Ambient-Temperature Dehalogenation via Mechanochemical Ullmann-Type Reductive Coupling

The current approaches capable of affording conjugated porous networks (CPNs) still rely on solution-based coupling reactions promoted by noble metal complexes or Lewis acids, on-surface polymerization conducted in ultrahigh-vacuum environment at very high temperatures (>200 °C), or mechanochemical Scholl-type reactions limited to electron-rich substrates. To develop simple and scalable approaches capable of making CPNs under neat and ambient conditions, herein, a novel and complementary method to the current oxidative Scholl coupling processes is demonstrated to afford CPNs via direct aromatic ring knitting promoted by mechanochemical Ullmann-type reactions. The key to this strategy lies in the dehalogenation of aromatic halides in the presence of Mg involving the formation of Grignard reagent intermediates. Products (Ph-CPN-1) obtained via direct C-C bond formation between 1,2,4,5-tetrabromobenzene (TBB) monomer feature high surface areas together with mesoporous architecture. The versatility of this approach is confirmed by the successful construction of various CPNs via knitting of the corresponding aromatic rings (e.g., pyrene and triphenylene), and even highly crystalline graphite product was obtained. The CPNs exhibit good electrochemical performance as the anode material in lithium-ion batteries (LIBs). Overall, this approach expands the frontiers of CPN synthesis and provides new opportunities to their scalable applications.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Design and Optimization of the Direct Recycling of Spent Li-Ion Battery Cathode Materials

Direct regeneration of spent Li-ion batteries based on the hydrothermal relithiation of cathode materials is a promising next-generation recycling technology. In order to demonstrate the feasibility of this approach at a large scale, we systematically design and optimize the process parameters to minimize both energy and raw material costs. Specifically, the effects of regenerative processing parameters on the composition, structure, and electrochemical performance of the regenerated cathode materials are investigated via systematic characterization and testing. From this analysis, it was found that the raw material costs can be substantially reduced by either replacing the typically employed 4 M LiOH solution by a cost-effective mixture of 0.1 M LiOH and 3.9 M KOH or recycling of the concentrated 4 M LiOH for continuous relithiation processes. Finally, life cycle analysis suggests that this strategy results in reduced energy consumption and greenhouse gas emissions, leading to an increased potential revenue, particularly when compared with hydro- and pyrometallurgical recycling methods.

25 ENERGY STORAGE↗

DOE OSTI2021

Design of High-Voltage Stable Hybrid Electrolyte with an Ultrahigh Li Transference Number

Considering the high energy consumption during processing, and the low compliance and adhesion of ceramic electrolytes, the integration of polymer into ceramic electrolytes provides a way to mitigate the interfacial issues. However, the severe ion concentration gradient, low ionic conductivity, and instability toward Li metal and high-voltage cathodes become the major concerns in applying hybrid electrolytes. In this work, we report a single-ionconducting hybrid electrolyte (SIE-LLZO) with 64 wt % Li 7 La 3 Zr 2 O 12 (LLZO) particles embedded in a fluoroboron-centered Li-conductive polymer framework (LiBFSIE). The SIE-LLZO electrolyte exhibited a high Li transference number of 0.94 and electrochemical stability up to 5.6 V vs Li/Li + . Promising averaged Coulombic efficiencies of 99.97% and 99.91% were achieved in cells with LiNi 0.8 Co 0.15 Al 0.05 O 2 and LiNi 0.6 Mn 0.2 Co 0.2 O2 cathodes for 400 and 200 cycles, respectively. Finally, the Li-conducting pathway in the hybrid electrolyte was further investigated by a 6 Li-to- 7 Li isotope replacement method, indicating that Li transport mainly relies on the LLZO and interface between LiBFSIE and LLZO.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Stress- and interface-compatible red phosphorus anode for high-energy and durable sodium-ion batteries

Sodium-ion battery is a promising candidate for energy storage application, but the absence of high-capacity and low-cost anode materials significantly limit their practical specific energy and cost. Red phosphorus (RP) possesses a high theoretical specific capacity but suffers from large volume change, low electronic conductivity and unstable solid-electrolyte interphase (SEI). Herein, a hierarchical micro/nanostructured antimony-doped RP/carbon anode was developed, which demonstrate extraordinary electrochemical performance with high initial Coulombic efficiency of ~90%, high areal (~1.7 mAh cm-2) capacity together with good cycle stability and rate capability. Combined experimental and computational studies consistently revealed that such a unique structural design can dramatically accommodate the mechanical stress and moreover effectively restrain the undesired decomposition of electrolyte solvents regardless of electrolytes formulation, resulting in superior structural integrity and thin/robust SEI formation during cycling. The present finding has offered an alternative strategy for stress management and interface engineering on high-capacity alloying-based anode materials.

Liu, Xiang↗

DOE OSTI2021

Alkaline salt-promoted construction of hydrophilic and nitrogen deficient graphitic carbon nitride with highly improved photocatalytic efficiency

Graphitic carbon nitride (g-C 3 N 4 ) possesses fascinating merits, but its practical applications are limited by the inferior properties of limited visible-light sorption, rapid recombination of photo-excited charge carriers and low electrical conductivity. Introduction of N-defects is an efficient approach to tune its optical properties, but strategies capable of creating abundant vacancies and simultaneously maintaining the highly crystalline architecture are still limited and highly desired. In this work, a facile construction methodology was demonstrated to afford g-C 3 N 4 with abundant N vacancies, high crystallinity, a hydrophilic surface structure, a small particle size, and an increased surface area under neat and mild conditions. Furthermore, the essence of our approach lies in the treatment of the bulk g-C 3 N 4 precursor with an alkaline salt (LiN(SiMe 3 ) 2 ) with a low melting point, moderate nucleophilicity, and easy removal procedures. The unique structural properties of the afforded ND-g-C 3 N 4 allow for a significantly redshifted absorption edge and enhanced charge carrier separation, leading to superior photocatalytic hydrogen evolution performance three times that obtained by pristine g-C 3 N 4 . The modification strategy developed herein sheds light on the fabrication of g-C 3 N 4 -based materials with improved photocatalytic efficiency via efficient introduction of N defects, variation of the surface structure, and retention of the high crystallinity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Robust perfluorinated porous organic networks: Succinct synthetic strategy and application in chlorofluorocarbons adsorption

Fluorinated porous organic networks (F-PONs) have demonstrated unique properties and applications, but approaches capable of affording F-PONs with high fluorine content and robust nanoporous architecture under metal-free and easy handling conditions are still rarely reported. Herein, using polydivinylbenzene (PDVB) as an easily available precursor, a novel and straightforward approach was developed to afford F-PONs via a dehydrative Friedel-Crafts reaction using perfluorinated benzylic alcohols as the cross-linking agent promoted by Brønsted acid (trifluoromethanesulfonic acid. Furthermore, the afforded material (F-PDVB) featured high fluorine content (22 at.%), large surface area (771 m 2 ∙g -1 ), and good chemical/thermal stability, rendering them as promising candidates for the adsorption of CO 2 , hydrocarbons, fluorocarbons, and chlorofluorocarbons, with weight capacities up to 520 wt% being achieved. This simple methodology can be extended to fabricate fluorinated hyper-crosslinked polymers (F-HCPs) from rigid aromatic monomers. The progress made in this work will open new opportunities to further expand the involvement of fluorinated materials in large scale applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

DOE OSTI2021

Perovskite Oxide–Halide Solid Solutions: A Platform for Electrocatalysts

The successful integration or hybridization of perovskite oxides with their halide cousins would enable the formation of both multi-anionic and multi-cationic solid solutions with unique metal-ion sites and synergistic properties that could potentially surpass the performance of classic perovskites. However, such solid solutions had not been produced previously owing to their distinct formation energies and different synthesis conditions. Solid solutions combining perovskite oxides with fluorides were produced in this study by mechanochemical synthesis. The obtained perovskite oxide–halide solid solutions had highly mixed elements and valences, uniform element distributions, and single-phase crystalline structures. In this work, the solid solution with an optimized combination of oxides and fluorides exhibited enhanced catalytic performance in the oxygen evolution reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Review—The Lithiation/Delithiation Behavior of Si-Based Electrodes: A Connection between Electrochemistry and Mechanics

Silicon is a promising alternative anode material to graphite because of its high gravimetric and volumetric energy densities. However, severe capacity fading is observed in Si electrodes, and it is a result of mechanical changes of Si, such as volume changes, stress or fracture. Furthermore, these mechanical behaviors are strongly coupled with the electrochemistry of the Li-Si alloying reaction in Si-based electrodes, including both thermodynamics and kinetics. Therefore, the electrochemical properties of Si-based electrodes are strongly dependent on the control of the mechanics of Si during lithiation/delithiation. As such, it is very important to understand the correlation between electrochemistry and mechanics. Here, we review lithiation/delithiation behaviors of various types of Si-based electrodes, applying a fundamental understanding of electrochemistry and mechanics and the correlation between them.

25 ENERGY STORAGE↗

DOE OSTI2021

Effect of temperature on capacity fade in silicon-rich anodes

Coin half-cells containing 80 wt% silicon electrodes are assembled and cycled at the similar to C/10 rate in the temperature range of 25-55 degrees C. To the best of our knowledge, this is the first time that the effect of temperature is reported for such high-silicon-containing cells. Two different electrolytes are used in this study, a baseline electrolyte and the baseline electrolyte +10 wt% fluoroethylene carbonate (FEC). Analysis of the capacity vs. cycle count data by curve fitting reveals that the addition of FEC markedly affects the capacity loss mechanism. Without FEC, the kinetic rate law for the capacity loss mechanism can be described as the sum of two logistic growth models. With the addition of FEC, the rate law depends on ln(t). Clearly, the addition of FEC has a profound effect on the mechanism of capacity loss. Interestingly, X-ray photoelectron spectroscopy (XPS) shows that the composition of the solid electrolyte interphase (SEI) layer changes markedly from mostly organic to mostly inorganic in the presence of FEC and how it varies at the different temperatures tested, especially in the absence of FEC.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Significance of a Solid Electrolyte Interphase on Separation of Anode and Cathode Materials from Spent Li-Ion Batteries by Froth Flotation

The separation of electrode active materials from spent Li-ion batteries (LIBs) by froth flotation is challenging due to the changes in surface properties of electrode active materials from cycling as well as the presence of organic binders. In this work, the froth flotation separation of aged anode and cathode composite materials from spent LIBs was systematically investigated after the materials were heat treated. The results show that aged anode and cathode materials from spent LIBs can be well separated from each other after a heating process in air at 400 degrees C and at which some of the PVDF binder remains intact. The underlying mechanism was investigated by X-ray photoelectron spectroscopy (XPS), contact angle measurements, and scanning transmission electron microscopy (STEM) coupled with energy-dispersive X-ray spectroscopy (EDX). The results from the XPS and contact angle measurements show that there is a hydrophilic and oxygen-rich layer on the surface of aged anode materials. This hydrophilic surface, associated with the solid electrolyte interface (SEI) layer, impacts the froth flotation process significantly. The results also show that both the SEI layers and PVDF binder residues on the surface are removed at 400 degrees C for an hour, restoring the hydrophobicity of the anode materials, which, in turn, benefits the separation of anode and cathode materials. The STEM/EDX elemental analysis data confirms that there are 20 nm-thick oxygen-rich SEI layers on the surfaces, which can be removed after a heating process. The present result illustrates the significance of the SEI layers in flotation separation of electrode materials and sheds new lights into the future development of the recycling processes for the separation of anode and cathode composite materials from spent Li-ion batteries.

25 ENERGY STORAGE↗