Search NASA⌕ Search

Engineering topics

Yang, Zhenzhong

Publications and source records attributed to Yang, Zhenzhong.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Polymer Single‐Chain Nanoparticles: Shaping Solid Surfactants

Polymer single-chain nanoparticles (SCNPs) have found a wide range of applications spanning catalysts, sensors and nanomedicine. The generation of structured SCNPs from star-shaped polymers with diverse architectures and functionalities affords a new avenue to expand the emerging research area. The large-scale synthesis of structured SCNPs is described by the electrostatics-mediated intramolecular crosslinking of three types of 3-armed star-shaped polymers (T-P4VP, T-PS-b-P4VP, and T-P4VP-b-PS), whose configuration is tunable from spherical to cage-shaped to dumbbell-shaped and star-shaped. The structured SCNPs are amphiphilic and can be used as solid surfactants to stabilize different types of emulsions.

Li, Shuailong↗
DOE OSTI2023

Thickness dependent OER electrocatalysis of epitaxial thin film of high entropy oxide

High entropy oxides (HEOs), which contain multiple elements in the same crystallographic site, are a promising platform for electrocatalysis in oxygen evolution reaction (OER). Investigating these materials in epitaxial thin film form expands the possibility of tuning OER activity by several means, which are not realizable in polycrystalline samples. To date, very few such studies have been reported. In this work, the OER activity of single-crystalline thin films of (La 0.2 Pr 0.2 Nd 0.2 Sm 0.2 Eu 0.2 )NiO 3 , grown on NdGaO 3 substrates have been investigated in 0.1 M KOH electrolyte as a function of film thickness. The OER activity increases with the thickness of the film. X-ray absorption spectroscopy measurements find an increase in Ni $d$-O $p$ covalency and a decrease in charge transfer energy with the increase in film thickness. These facilitate higher charge transfer between Ni and surface adsorbates, increasing OER activity. However, the OER process leads to excessive leaching of thicker films and the OER activity of a 75 unit cell thick film is found to be optimal in the present study. In conclusion, this work demonstrates that the thickness of perovskite oxides can be used as a parameter to enhance OER activity.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Interface synergism and engineering of Pd/Co@N-C for direct ethanol fuel cells

Direct ethanol fuel cells have been widely investigated as nontoxic and low-corrosive energy conversion devices with high energy and power densities. It is still challenging to develop high-activity and durable catalysts for a complete ethanol oxidation reaction on the anode and accelerated oxygen reduction reaction on the cathode. The materials’ physics and chemistry at the catalytic interface play a vital role in determining the overall performance of the catalysts. Herein, we propose a Pd/Co@N-C catalyst that can be used as a model system to study the synergism and engineering at the solid-solid interface. Particularly, the transformation of amorphous carbon to highly graphitic carbon promoted by cobalt nanoparticles helps achieve the spatial confinement effect, which prevents structural degradation of the catalysts. The strong catalyst-support and electronic effects at the interface between palladium and Co@N-C endow the electron-deficient state of palladium, which enhances the electron transfer and improved activity/durability. The Pd/Co@N-C delivers a maximum power density of 438 mW cm -2 in direct ethanol fuel cells and can be operated stably for more than 1000 hours. This work presents a strategy for the ingenious catalyst structural design that will promote the development of fuel cells and other sustainable energy-related technologies.

25 ENERGY STORAGE↗
DOE OSTI2022

Spontaneous Lithiation of Binary Oxides during Epitaxial Growth on LiCoO 2

Epitaxial growth is a powerful tool for synthesizing heterostructures and integrating multiple functionalities. Interfacial mixing can readily occur at temperatures required for complete film crystallization and can significantly modify the properties of layered structures, particularly for those containing energy storage materials with smaller cations. Here we show a two-step sequence involving the growth of an epitaxial LiCoO 2 cathode layer followed by the deposition of a binary transition metal oxide (WO 3 , TiO 2 , and others) in which controlled lithiation of the binary oxide occurs. Orientation-controlled epitaxial synthesis of the model solid-state-electrolyte Li 2 WO 4 and model anode material Li 4 Ti 5 O 12 occurs as WO 3 and TiO 2 nucleate their respective host lattices and attract Li ions from the underlying cathode. The cathode layer readily provides a tunable amount of Li ions for the controlled lithiation of the subsequent layer. We demonstrate that this approach can be used for energy materials discovery and exploring different combinations of epitaxial interfaces that can serve as well-defined model systems for mechanistic studies of energy storage and conversion processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Robust Atomic-Resolution Imaging of Lithium in Battery Materials by Center-of-Mass Scanning Transmission Electron Microscopy

The performance of energy storage materials is often governed by their structure at the atomic scale. Conventional electron microscopy can provide detailed information about materials at these length scales, but direct imaging of light elements such as lithium presents a challenge. While several recent techniques allow lithium columns to be distinguished, these typically either involve complex contrast mechanisms that make image interpretation difficult or require significant expertise to perform. In this work, we demonstrate how center-of-mass scanning transmission electron microscopy (CoM-STEM) provides an enhanced ability for simultaneous imaging of lithium and heavier element columns in lithium ion conductors. Through a combination of experiments and multislice electron scattering calculations, we show that CoM-STEM is straightforward to perform and produces directly interpretable contrast for thin samples, while being more robust to variations in experimental parameters than previously demonstrated techniques. As a result, CoM-STEM is positioned to become a reliable and facile method for directly probing all elements within energy storage materials at the atomic scale.

25 ENERGY STORAGE↗
DOE OSTI2021

Tuning magnetic and optical properties through strain in epitaxial LaCrO 3 thin films

We report on the effect of epitaxial strain on magnetic and optical properties of perovskite LaCrO 3 (LCO) single crystal thin films. Epitaxial LCO thin films are grown by pulsed laser deposition on proper choice of substrates to impose different strain states. A combined experimental and theoretical approach is used to demonstrate the direct correlation between lattice-strain and functional properties. The magnetization results show that the lattice anisotropy plays a critical role in controlling the magnetic behavior of LCO films. The strain induced tetragonality in the film lattice strongly affects the optical transitions and charge transfer gap in LCO. This study opens possibilities to tailor the functional properties of LCO and related materials by strain engineering in epitaxial growth.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Doping-modulated strain control of bifunctional electrocatalysis for rechargeable zinc–air batteries

Changes in the local atomic arrangement in a crystal caused by lattice-mismatch-induced strain can efficiently regulate the performance of electrocatalysts for zinc–air batteries (ZABs) in many manners, mainly due to modulated electronic structure configurations that affect the adsorption energies for oxygen-intermediates formed during oxygen reduction and evolution reactions (ORR and OER). However, the application of strain engineering in electrocatalysis has been limited by the strain relaxation caused by structural instability such as dissolution and destruction, leading to insufficient durability towards the ORR/OER. In this work, we propose a doping strategy to modulate the phase transition and formation of self-supported cobalt fluoride–sulfide (CoFS) nanoporous films using a low amount of copper (Cu) as a dopant. This well-defined Cu–CoFS heterostructure overcomes the obstacle of structural instability. Our study of the proposed Cu–CoFS also helps establish the structure–property relationship of strained electrocatalysts by unraveling the role of local strain in regulating the electronic structure of the catalyst. As a proof-of-concept, the Cu–CoFS electrocatalyst with doping-modulated strain exhibited superior onset potentials of 0.91 V and 1.49 V for the ORR and OER, respectively, surpassing commercial Pt/C@RuO 2 and benchmarking non-platinum group metal (non-PGM) catalysts. ZABs with the Cu–CoFS catalyst delivered excellent charge/discharge cycling performance with an extremely low voltage gap of 0.5 V at a current density of 10 mA cm –2 and successively 0.93 V at a high current density of 100 mA cm –2 and afforded an outstanding peak power density of 255 mW cm –2 .

25 ENERGY STORAGE↗
DOE OSTI2021

Stable, high-performance, dendrite-free, seawater-based aqueous batteries

Metal anode instability, including dendrite growth, metal corrosion, and hetero-ions interference, occurring at the electrolyte/electrode interface of aqueous batteries, are among the most critical issues hindering their widespread use in energy storage. Herein, a universal strategy is proposed to overcome the anode instability issues by rationally designing alloyed materials, using Zn-M alloys as model systems (M = Mn and other transition metals). An in-situ optical visualization coupled with finite element analysis is utilized to mimic actual electrochemical environments analogous to the actual aqueous batteries and analyze the complex electrochemical behaviors. The Zn-Mn alloy anodes achieved stability over thousands of cycles even under harsh electrochemical conditions, including testing in seawater-based aqueous electrolytes and using a high current density of 80 mA cm –2 . The proposed design strategy and the in-situ visualization protocol for the observation of dendrite growth set up a new milestone in developing durable electrodes for aqueous batteries and beyond.

25 ENERGY STORAGE↗
DOE OSTI2020

Porous FeCo Glassy Alloy as Bifunctional Support for High-Performance Zn-Air Battery

Zn-air battery (ZAB) is attracting increasing attention due to its high safety and performance. However, the practical application of ZAB relies heavily on developing durable support materials to replace conventional carbon supports which have unrecoverable corrosion issues, severely jeopardizing ZAB performance. Herein, a novel porous FeCo glassy alloy was developed as bifunctional catalytic support for ZAB. Specifically, the conducting skeleton of the porous glassy alloy was used to stabilize oxygen reduction cocatalysts, and more importantly, the FeCo served as the primary phase for oxygen evolution. To prove the concept of catalytic glassy alloy support, ultra-small Pd nanoparticles were anchored, as oxygen reduction active sites, on the porous FeCo (noted as Pd/FeCo) for ZAB. The Pd/FeCo exhibited a significantly improved electrocatalytic activity for oxygen reduction (a half-wave potential of 0.85 V) and oxygen evolution (a potential of 1.55 V to reach 10 mA cm –2 ) in the alkaline media. When used in the ZAB, the Pd/FeCo delivered an output power density of 117 mW cm –2 and outstanding cycling stability for over 200 h (400 cycles), surpassing the conventional carbon-supported Pt/C+IrO 2 catalysts. Such an integrated design of combining highly active components with porous architecture provides a new strategy to develop novel nanostructured electrocatalysts.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Hole-Trapping-Induced Stabilization of Ni 4+ in SrNiO 3 /LaFeO 3 Superlattices

Creating new functionality in materials containing transition metals is predicated on our ability to control the associated charge states. For a given metal, forming lower oxidation states is typically easier than generating higher values, and there is an upper limit on valence that is not exceeded under normal conditions. Here we demonstrate that we can exceed the normal upper limit of 3+ for Ni and Fe via synthesis of (SrNiO 3 )m/(LaFeO 3 )n superlattices by tuning n and m. The Goldschmidt tolerance constraints are lifted and SrNi 4+ O 3 with holes on adjacent O anions can be stabilized as a perovskite at the single unit cell level (m = 1). Spectroscopy reveals that the n = 1 superlattice contains Ni 3+ and Fe 4+ , whereas Ni 4+ and Fe 3+ are observed in the n = 5 superlattice. Here, our results show that the B-site cation valences can be tuned by controlling the magnitude of the FeO6 octahedral rotations which in turn drive the energy balance between Ni 3+ /Fe 4+ and Ni 4+ /Fe 3+ , thus controlling emergent electrical properties such as the band alignment and resulting hole confinement. We suggest that this approach may be generally useful for synthesizing novel, metastable layered structures with new functionalities.

36 MATERIALS SCIENCE↗
DOE OSTI2020

The sensitive surface chemistry of Co-free, Ni-rich layered oxides: identifying experimental conditions that influence characterization results

Recent studies have suggested that Co-free, Ni-rich layered cathodes (e.g., doped LiNiO2) can provide promising battery performance for practical applications. However, these layered cathodes suffer from significant surface instability during various stages of the sample history, which generates inherent challenges for achieving stable battery performance and obtaining statistically representative characterization results. To reliably report the surface chemistry of these materials, delicate controls of stepwise sample preparation are required. In this study, we aim to reveal how the surface chemistry of LiNiO2 based materials changes with various environments, including human exhalation, sample storage, sample preparation, electrochemistry cycling, and surface doping. Our results demonstrate that the surface of these materials is highly reactive and prone to alter at various stages of sample handling and characterization. The sensitive surface could impact the interpretation of the surface chemical and structural information, including surface carbonate formation, transition metal reduction and dissolution, and surface reconstruction. Importantly, the heterogeneity of the surface degradation calls for a consolidation of nanoscale, high-resolution characterization, and ensemble-averaged methods in order to improve statistical representation. Furthermore, the doping chemistry can effectively mitigate the surface degradation and improve overall battery performance due to the enhanced surface oxygen retention. Our study highlights the necessity of strict measurements through complementary characterizations at multiple length scales to eliminate unintentional biased conclusions.

surface chemistry, Co-free Ni-rich cathodes, Istab↗
DOE OSTI2020

Boosting alkaline hydrogen evolution: the dominating role of interior modification in surface electrocatalysis

The alkaline hydrogen evolution reaction (A-HER) holds great promise for clean hydrogen fuel generation but its practical utilization is severely hindered by the sluggish kinetics for water dissociation in alkaline solutions. Traditional ways to improve the electrochemical kinetics for A-HER catalysts have been focusing on surface modification, which still can not meet the demanding requirements for practical water electrolysis because of catalyst surface deactivation. In this work, we report an interior modification strategy to significantly boost the A-HER performance. Specifically, a trace amount of Pt was doped in the interior Co 2 P (Pt–Co 2 P) to introduce a stronger dopant–host interaction than that of the surface-modified catalyst. Consequently, the local chemical state and electronic structure of the catalysts were adjusted to improve the electron mobility and reduce the energy barriers for hydrogen adsorption and H–H bond formation. As a proof-of-concept, the interior-modified Pt–Co 2 P shows a reduced onset potential at near-zero volts for the A-HER, low overpotentials of 2 mV and 58 mV to achieve 10 and 100 mA cm –2 , and excellent durability for long-term utilization. The interior-modified Pt–Co 2 P delivers superior A-HER performance to Pt/C and other state-of-the-art electrocatalysts. This work will open a new avenue for A-HER catalyst design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Dynamic Lattice Oxygen Participation on Perovskite LaNiO 3 during Oxygen Evolution Reaction

Determining the role of lattice oxygen in the oxygen evolution reaction (OER) is pivotal to understanding reaction mechanisms and predictive design of electrocatalysts based on transition metal oxides. In this work, using well-defined, isotope ( 18 O)-enriched, epitaxial LaNiO 3 thin films as a model system, we show that dynamic lattice oxygen exchange occurs during OER. Additionally, time-of-flight secondary ion mass spectrometry studies reveal that lattice oxygen exchange can affect the top 2 nm of the LaNiO 3 films, but the surface remains crystalline and in the perovskite phase after OER. In addition, cyclic voltammetry and potentiostatic measurements show that OER kinetics are strongly pH dependent, which is different from what is expected from the typical four concerted proton-electron transfer steps, most likely due to the involvement of lattice oxygen. Our findings suggest that the roles of lattice oxygen during OER, and charge transfer mechanisms in such systems, need to be further studied in order to design more efficient and stable electrocatalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Time- and strain-dependent nanoscale structural degradation in phase change epitaxial strontium ferrite films

Topotactic phase transition between metallic, perovskite SrFeO 3 and insulating, Brownmillerite SrFeO 2.5 has been extensively studied due to the potential applications in resistive switching devices for neuromorphic computing. However, its practical utilization as memristors has been hindered by the structural instability of SrFeO 3 , which is often ascribed to the generation of oxygen vacancies to form SrFeO 3-δ . Here we reveal the dominating defects generated in SrFeO 3 epitaxial thin films are atomic scale gaps as a result of interfacial strain. Our correlated time- and strain-dependent measurements show that tensile strained SrFeO 3 films form vertical, nanoscale gaps that are SrO-rich, which are accountable for the observed metal-to-insulator transition over time. While compressively strained or small lattice mismatched SrFeO 3 films mainly yield horizontal gaps with a smaller impact on the in-plane transport. The atomic scale origin of such defects and their impact on device performance need to be further understood in order to integrate phase change materials in oxide electronics.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Stabilizing atomic Pt with trapped interstitial F in alloyed PtCo nanosheets for high-performance zinc-air batteries

Recently, considerable attention has been paid to the stabilization of atomic platinum (Pt) catalysts on desirable supports in order to reduce Pt consumption, improve the catalyst stability, and thereafter enhance the catalyst performance in renewable energy devices such as fuel cells and zinc-air batteries (ZABs). Herein, we rationally designed a novel strategy to stabilize atomic Pt catalysts in alloyed platinum cobalt (PtCo) nanosheets with trapped interstitial fluorine (SA-PtCoF) for ZABs. The trapped interstitial F atoms in the PtCoF matrix induce lattice distortion resulting in weakening of the Pt–Co bond, which is the driving force to form atomic Pt. As a result, the onset potentials of SA-PtCoF are 0.95 V and 1.50 V for the oxygen reduction and evolution reactions (ORR and OER), respectively, superior to commercial Pt/C@RuO 2 . When used in ZABs, the designed SA-PtCoF can afford a peak power density of 125 mW cm -2 with a specific capacity of 808 mA h g Zn -1 and excellent cyclability over 240 h, surpassing the state-of-the-art catalysts.

25 ENERGY STORAGE↗