Jet-induced enhancement of deuteron production in pp and p-Pb collisions at the LHC
Not Available
Feng, Yi-Heng↗
Engineering topics
Yang, Zhong
Publications and source records attributed to Yang, Zhong.
Nanostructured C@CuS Core–Shell Framework with High Lithium-Ion Storage Performance
In this study, we have synthesized a nanostructured core–shell framework of carbon-coated copper sulfide (C@CuS) through a one-step precipitation technique. The carbon sphere template facilitated the nucleation of CuS nanostructures. The synthesized nanocomposites have demonstrated remarkable lithium-ion storage capabilities when utilized as an anode in lithium-ion batteries. Notably, they exhibit an impressive rate capability of 314 mAh g -1 at a high current density of 5000 mA g -1 , along with excellent long-term cycle stability, maintaining 463 mAh g -1 at 1000 mA g -1 after 800 cycles. This superior performance is due to the core–shell architecture of the composite, where the carbon core enhances the conductivity of CuS nanoparticles and mitigates volume expansion, thus preventing capacity loss. Our study not only elucidates the significance of carbon in the construction of nano-heterojunctions or composite electrodes but also presents a practical approach to significantly boost the electrochemical performance of CuS and other metal sulfides.
25 ENERGY STORAGE↗
Effect of crystallite size on lithium storage performance of high entropy oxide (Cr 0.2 Mn 0.2 Co 0.2 Ni 0.2 Zn 0.2 ) 3 O 4 nanoparticles
High-entropy oxides (HEOs), known for their high theoretical capacity and structural stability, are considered promising anode materials for next-generation lithium-ion batteries (LIBs). In this research, we synthesized a novel spinel-type HEO, (Cr 0.2 Mn 0.2 Co 0.2 Ni 0.2 Zn 0.2 ) 3 O 4 , using a solution combustion method. By adjusting the quantity of the combustion agent, we produced samples with varying crystallite sizes. The crystallite size of the HEOs initially enlarges with an increased combustion agent, then diminishes. The enhancement of crystallite size correlates with improved electrochemical performance for lithium storage. Notably, the (Cr 0.2 Mn 0.2 Co 0.2 Ni 0.2 Zn 0.2 ) 3 O 4 nanoparticles, with the largest crystallite size of 36.3 nm, demonstrated a reversible capacity of 343 mA h g -1 after 100 cycles at 100 mA g -1 , a capacity retention to 319 mA h g -1 after 1000 cycles at 1 A g -1 , and a commendable rate capability of 260 mA h g -1 at 2 A g -1 . Furthermore, this study underscores the pivotal role of crystallite size in LIB performance and presents a viable strategy to enhance the lithium storage capabilities of HEOs and other metal oxides.
25 ENERGY STORAGE↗
A Novel Spinel High-Entropy Oxide (Cr0.2Mn0.2Co0.2Ni0.2Zn0.2)3O4 as Anode Material for Lithium-Ion Batteries
In this study, we synthesized spinel high-entropy oxide (HEO) (Cr0.2Mn0.2Co0.2Ni0.2Zn0.2)3O4 nanoparticles by a simple solution combustion method. These particles were investigated for their performance as anodes in lithium-ion batteries. The reversible capacity is 132 mAh·g−1 after 100 cycles at a current density of 100 mA·g−1, 107 mAh·g−1 after 1000 cycles at a current density of 1 A g−1, and 96 mAh·g−1 rate capacity at a high current density of 2 A g−1. The outstanding cycle stability under high current densities and remarkable rate performance can be attributed to the stable structure originating from the high entropy of the material.
25 ENERGY STORAGE↗
(CrMnCoNiZn) 3 O 4 @PPy core-shell nanocomposite with excellent electrochemical performance as lithium-ion battery anode
High entropy oxides (HEOs) have an excellent potential for use as electrode materials in lithium-ion batteries (LIBs) due to their high theoretical specific capacity. In this work, spinel-structured (CrMnCoNiZn) 3 O 4 HEO nanoparticles with five elements in equal molar ratio is first generated by solution combustion method. (CrMnCoNiZn) 3 O 4 @polypyrrole (PPy) nanocomposites are prepared by in-situ polymerization method. As an anode for lithium-ion batteries, the electrochemical performance of the (CrMnCoNiZn) 3 O 4 @PPy composite outperforms that of (CrMnCoNiZn) 3 O 4 nanoparticles. The capacity is 802 mAh/g after 100 cycles at a current density of 100 mA/g, 416 mAh/g after 1000 cycles at a high current density of 1 A/g, and 360 mAh/g rate capacity at 2 A/g. The excellent electrochemical performance of the composites is mainly due to the fact that the conductive and flexible PPy is encapsulated on the high-entropy oxides, which can alleviate the volume change triggered by extraction-insertion of lithium ions process, as well as enhance the electrical conductivity and reduce the occurrence of some side reactions. Finally, this method of compositing materials can also be used in other HEOs and conductive polymers, providing a new idea to enhance the electrochemical properties of HEOs.
25 ENERGY STORAGE↗
Predictions for the sPHENIX physics program
sPHENIX is a next-generation detector experiment at the Relativistic Heavy Ion Collider, designed for a broad set of jet and heavy-flavor probes of the Quark-Gluon Plasma created in heavy ion collisions. In anticipation of the commissioning and first data-taking of the detector in 2023, a RIKEN-BNL Research Center (RBRC) workshop was organized to collect theoretical input and identify compelling aspects of the physics program. Here this paper compiles theoretical predictions from the workshop participants for jet quenching, heavy flavor and quarkonia, cold QCD, and bulk physics measurements at sPHENIX.
73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
Probing the Short-Distance Structure of the Quark-Gluon Plasma with Energy Correlators
Energy-energy correlators (EECs) are promising observables to study the dynamics of jet evolution in the quark-gluon plasma (QGP) through its imprint on angular scales in the energy flux of final-state particles. We carry out the first complete calculation of EECs using realistic simulations of high-energy heavy-ion collisions and dissect the different dynamics underlying the final distribution through analyses of jet propagation in a uniform medium. The EECs of γ -jets in heavy-ion collisions are found to be enhanced by the medium response from elastic scatterings instead of induced gluon radiation at large angles. In the meantime, EECs are suppressed at small angles due to energy loss and transverse momentum broadening of jet shower partons. These modifications are further shown to be sensitive to the angular scale of the in-medium interaction, as characterized by the Debye screening mass. Experimental verification and measurement of such modifications will shed light on this scale and the short-distance structure of the QGP in heavy-ion collisions. Published by the American Physical Society 2024
72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
Deep learning assisted jet tomography for the study of Mach cones in QGP
Abstract Mach cones are expected to form in the expanding quark-gluon plasma (QGP) when energetic quarks and gluons traverse the hot medium at a velocity faster than the speed of sound in high-energy heavy-ion collisions. The shape of the Mach cone and the associated diffusion wake are sensitive to the initial jet production location and the propagation direction of the parton shower relative to the radial flow because of the distortion caused by the collective expansion of the QGP and the large density gradient. The shape of jet-induced Mach cones and their distortions in heavy-ion collisions provide a unique and direct probe of the dynamical evolution and the equation of state of QGP. However, it is difficult to identify the Mach cone and the diffusion wake in current experimental measurements of final hadron distributions because they are averaged over all possible initial jet production locations and parton-shower propagation directions. To overcome this difficulty, we develop a deep learning assisted jet tomography which uses the full information of the final hadrons from jets to localize the initial jet production positions. This method can help to constrain the initial regions of jet production in heavy-ion collisions and enable a differential study of Mach-cones with different path lengths and orientations relative to the radial flow of the QGP in heavy-ion collisions.
72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
Synthesis, corrosion, and wear resistance of a black microarc oxidation coating on pure titanium
Not Available
Guo, Qiaoqin↗
The Electrochemical Corrosion Behavior of Plasma Electrolytic Oxidation Coatings Fabricated on Aluminum in Silicate Electrolyte
Plasma electrolytic oxidation (PEO) coatings were fabricated on the aluminum in silicate electrolyte. Microstructures and elemental compositions of these PEO coatings were examined by scanning electron microscopy (SEM) equipped with an energy-dispersive x-ray spectroscopy (EDS). Corrosion resistances of the coated samples were evaluated using the measurements of open-circuit potential (OCP), repetitive polarization and electrochemical impedance spectroscopy (EIS) in 3.5 wt.% NaCl solution. The results indicated that the PEO coatings not only act as a physical shield limiting the penetration of corrosive solution, but also establish an anodic location with high concentration of H{sup +} ions and other product ions as pitting corrosion begins. With the development of pitting corrosion, the accumulation of corrosion products inside the pits and pores of the coatings decreases the corrosion process effectively.
36 MATERIALS SCIENCE↗
Msx1-modulated muscle satellite cells retain a primitive state and exhibit an enhanced capacity for osteogenic differentiation
Multipotent muscle satellite cells (MuSCs) have been identified as potential seed cells for bone tissue engineering. However, MuSCs exhibit a rapid loss of stemness after in vitro culturing, thereby compromising their therapeutic efficiency. Muscle segment homeobox gene 1 (msx1) has been found to induce the dedifferentiation of committed progenitor cells, as well as terminally differentiated myotubes. In this study, a Tet-off retroviral gene delivery system was used to modulate msx1 expression. After ten passages, MuSCs that did not express msx-1 (e.g., the non-msx1 group) were compared with MuSCs with induced msx-1 expression (e.g., the msx1 group). The latter group exhibited a more juvenile morphology, it contained a significantly lower percentage of senescent cells characterized by positive β-galactosidase staining, and it exhibited increased proliferation and a higher proliferation index. Immunocytochemical stainings further detected a more primitive gene expression profile for the msx1 group, while osteogenic differentiation assays and ectopic bone formation assays demonstrated an improved capacity for the msx1 group to undergo osteogenic differentiation. These results suggest that transient expression of msx1 in MuSCs can retain a primitive state, thereby enhancing their capacity for osteogenic differentiation and restoring the potential for MuSCs to serve as seed cells for bone tissue engineering.
60 APPLIED LIFE SCIENCES↗
Elastic hydrogel substrate supports robust expansion of murine myoblasts and enhances their engraftment
The application of satellite cell-derived myoblasts in regenerative medicine has been restricted by the rapid loss of stemness during in vitro cell expansion using traditional culture systems. However, studies published in the past decade have highlighted the influence of substrate elasticity on stem cell fate and revealed that culture on a soft hydrogel substrate can promote self-renewal and prolong the regenerative potential of muscle stem cells. Whether hydrogel substrates have similar effects after long-term robust expansion remains to be determined. Herein we prepared an elastic chitosan/beta-glycerophosphate/collagen hydrogel mimicking the soft microenvironment of muscle tissues for use as the substrate for satellite cell culture and investigated its influence on long-term cell expansion. After 20 passages in culture, satellite cell-derived myoblasts cultured on our hydrogel substrate exhibited significant improvements in proliferation capability, cell viability, colony forming frequency, and potential for myogenic differentiation compared to those cultured on a routine rigid culture surface. Immunochemical staining and western blot analysis both confirmed that myoblasts cultured on the hydrogel substrate expressed higher levels of several differentiation-related markers, including Pax7, Pax3, and SSEA-1, and a lower level of MyoD compared to myoblasts cultured on rigid culture plates (all p<0.05). After transplantation into the tibialis anterior of nude mice, myoblasts that had been cultured on the hydrogel substrate demonstrated a significantly greater engraftment efficacy than those cultured on the traditional surface. Collectively, these results indicate that the elastic hydrogel substrate supported robust expansion of murine myoblasts and enhanced their engraftment in vivo. - Highlights: • An elastic hydrogel was designed to mimic the pliable muscle tissue microenvironment. • Myoblasts retained their stemness in long-term culture on the elastic hydrogels. • Myoblasts expanded on the elastic hydrogel exhibited enhanced in vivo engraftment.
60 APPLIED LIFE SCIENCES↗