Engineering topics
Yao, Huifeng
Publications and source records attributed to Yao, Huifeng.
Tuning the Intermolecular Electrostatic Interaction toward High-Efficiency and Low-Cost Organic Solar Cells
Organic solar cells (OSCs) have achieved much progress with rapidly increasing power conversion efficiencies (PCEs). It should be noted that the top-performance OSCs are generally consisted of active materials with complex chemical structures, resulting in high costs. Here, combining the material design and morphology control, high-efficiency OSCs are fabricated by a low-cost donor: acceptor blend. A completely non-fused electron acceptor named Tz is designed and synthesized via introducing thiazole units on both sides of a bithiophene core, which shows an outstanding PCE of 13.3% with a typical polythiophene donor. More importantly, optimization guidelines are presented to get excellent morphology for low-cost donor:acceptor systems. Three polythiophenes are selected, poly(3-hexylthiophene) and its two derivatives with electron-withdrawing substitutions (PDCBT and PDCBT-2F), as donors to fabricate the cell devices. The computational and experimental data reveal that decreasing the electrostatic interaction between polythiophene and Tz is the key to getting a suppressed miscibility and thus a high phase purity. Finally, this study provides insight into the molecular design and donor:acceptor matching requirements for high-efficiency and low-cost OSCs.
Reduced Nonradiative Energy Loss Caused by Aggregation of Nonfullerene Acceptor in Organic Solar Cells
Abstract Reducing energy loss ( E loss ) is of critical importance to improving the photovoltaic performance of organic solar cells (OSCs). Although nonradiative recombination () is investigated in quite a few works, the method for modulating is seldom reported. Here, a new method of depressing E loss is reported for nonfullerene OSCs. In addition to ternary‐blend bulk heterojunction (BHJ) solar cells, it is proved that a small molecular material (NRM‐1) can be selectively dispersed into the acceptor phase in the PBDB‐T:IT‐4F‐based OSC, resulting in lower and , and hence a significant improvement in the open‐circuit voltage ( V OC ); under an optimal feed ratio of NRM‐1, an enhanced power conversion efficiency can also be gained. Moreover, the role of NRM‐1 in the method is illustrated and its applicability for several other representative OSCs is validated. This work paves a new pathway to reduce the E loss for nonfullerene OSCs.
Enhanced π–π Interactions of Nonfullerene Acceptors by Volatilizable Solid Additives in Efficient Polymer Solar Cells
Abstract Fine‐tuning of the nanoscale morphologies of the active layers in polymer solar cells (PSCs) through various techniques plays a vital role in improving the photovoltaic performance. However, for emerging nonfullerene (NF) PSCs, the morphology optimization of the active‐layer films empirically follows the methods originally developed in fullerene‐based blends and lacks systematic studies. In this work, two solid additives with different volatilities, SA‐4 and SA‐7, are applied to investigate their influence on the morphologies and photovoltaic performances of NF‐PSCs. Although both solid additives effectively promote the molecular packing of the NF acceptors, due to the higher volatility of SA‐4, the devices processed with SA‐4 exhibit a power conversion efficiency of 13.5%, higher than that of the control devices, and the devices processed with SA‐7 exhibit poor performances. Through a series of detailed morphological analyses, it is found that the volatilization of SA‐4 after thermal annealing is beneficial for the self‐assembly packing of acceptors, while the residuals due to the incomplete volatilization of SA‐7 have a negative effect on the film morphology. The results delineate the feasibility of applying volatilizable solid additives and provide deeper insights into the working mechanism, establishing guidelines for further material design of solid additives.
A High‐Efficiency Organic Solar Cell Enabled by the Strong Intramolecular Electron Push–Pull Effect of the Nonfullerene Acceptor
Abstract Besides broadening of the absorption spectrum, modulating molecular energy levels, and other well‐studied properties, a stronger intramolecular electron push–pull effect also affords other advantages in nonfullerene acceptors. A strong push–pull effect improves the dipole moment of the wings in IT‐4F over IT‐M and results in a lower miscibility than IT‐M when blended with PBDB‐TF. This feature leads to higher domain purity in the PBDB‐TF:IT‐4F blend and makes a contribution to the better photovoltaic performance. Moreover, the strong push–pull effect also decreases the vibrational relaxation, which makes IT‐4F more promising than IT‐M in reducing the energetic loss of organic solar cells. Above all, a power conversion efficiency of 13.7% is recorded in PBDB‐TF:IT‐4F‐based devices.
From Binary to Ternary: Improving the External Quantum Efficiency of Small‐Molecule Acceptor‐Based Polymer Solar Cells with a Minute Amount of Fullerene Sensitization
Ternary blend is proved to be a potential contender for achieving high efficiency in organic photovoltaics, which can apparently strengthen the absorption of active layer so as to better harvest light irradiation. Much of the previous work in ternary polymer solar cells focuses on broadening the absorption spectrum; however, a new insight is brought to study the third component, which in tiny amounts influents the small‐molecule acceptor‐based device performance. Without contributing to complementing the absorption, a minute amount of fullerene derivative, Bis‐PC 70 BM, can effectively play an impressive role as sensitizer in enhancing the external quantum efficiency of the host binary blend, especially for polymeric donor. Detailed investigations reveal that the minute addition of Bis‐PC 70 BM can realize morphology modification as well as facilitate electron transfer from polymeric donor to small molecule acceptor via cascade energy level modulation, and therefore lead to an improvement in device efficiency.
Achieving Highly Efficient Nonfullerene Organic Solar Cells with Improved Intermolecular Interaction and Open-Circuit Voltage
Here, a new acceptor–donor–acceptor-structured nonfullerene acceptor ITCC (3,9-bis(4-(1,1-dicyanomethylene)-3-methylene-2-oxo-cyclopenta[b]thiophen)-5,5,11,11-tetrakis(4-hexylphenyl)-dithieno[2,3- d ':2,3- d '] -s-indaceno[1,2- b :5,6- b ']-dithiophene) is designed and synthesized via simple end-group modification. ITCC shows improved electron-transport properties and a high-lying lowest unoccupied molecular orbital level. A power conversion efficiency of 11.4% with an impressive V OC of over 1 V is recorded in photovoltaic devices, suggesting that ITCC has great potential for applications in tandem organic solar cells.